• Journal of Oral Medicine and Pain
• /
• v.26 no.4
• /
• pp.395-406
• /
• 2001

지난 수십년동안, 다양한 레이저기기를 이용하여 치아 경조직에 대한 응용 실험을 수행되었다. 그러나, 발생한 주요한 문제는 열발생과 플라즈마 형성과 같은 부작용이 지속된다는 점이었다. 실망스러운 실험결과에 따라 치아 삭제에 대한 레이저의 응용에 대한 연구가 거의 진행되지 못하였다. 본 연구의 목적은 국내에서 처음으로 개발된 얼비움레이저기기를 사용하여 다양한 에너지 수준과 다양한 펄스빈도에서 법랑질의 삭제율을 비교하고자 하였다. 본 연구에 사용된 레이저기기는 국내에서 최초로 개발된 $2.94{\mu}m$ 펄스를 $250{\mu}s$ 방출하는 얼비움야그레이저 기기이다. 기기의 에너지는 20 mJ에서 350 mJ까지 다양하게 방출하며, 최대 출력은 3.5 W이다. 22개의 치아를 에폭시 레진에 포매하고 경화하였다. 치아의 법랑질을 회전 다이아몬드 칼을 흐르는 물과 함께 사용하여 협측 또는 설측으로 평탄하게 삭제하였다. 제작된 법랑질표면은 6개의 구획으로 구분하여 에너지 수준과 펄스빈도에 따라 조사하였다. 본 연구에서 사용된 표본 수는 132개이며, 삭제율을 조사하기 위한 모든 표본은 22개의 실험 군으로 분류하였다. 실험결과는 다음과 같다. 1. 에너지 수준간에는 유의한 삭제율의 차이가 있었다. 2. 40 및 80 mJ로 조사한 경우에는 펄스빈도 간에 차이가 없었지만, 120 mJ의 출력으로 동일한 에너지를 조사한 경우에는 20 Hz가 40 또는 80 mJ로 조사한 경우 보다 가장 삭제효과가 높았다. 3. 연속조사 한 경우 조사시간 경과에 따라 법랑질의 삭제율은 증가되지 않았다. 결론적으로 효과적으로 법랑질을 삭제하기 위해서는 적절한 에너지와 펄스의 레이저를 사용해야 하며, 또한 항상 정확한 초점거리를 유지해야 할 것으로 사료된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.725-734
• /
• 2019

Moon jellyfish Aurelia coerulea are highly abundant off the coast of Tongyeong, Korea. We measured the density of A. coerulea in this area using a scientific echosounder at frequencies of 38 and 120 kHz, and then applied a distorted wave Born approximation (DWBA) model to calculate the target strength of the echosounder at each frequency. Then, we used the frequency difference method to extract jellyfish echo signals and estimate the A. coerulea density. A. coerulea was evenly distributed throughout the water column; the backscattering strength ranged from -75 to -65 dB. In May and August, the A. coerulea densities at survey lines 3 and 4 were estimated at 1.5-1.6 and 0.2-0.9 g/m2, with mean weighted densities of 1.04 and 0.48 g/m2, respectively. In September, the A. coerulea densities estimates in Jaran Bay and Goseong Bay were 0.6-2.1 and 0.1-0.4 g/m2, with mean weighted densities of 1.25 and 0.24 g/m2, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.4
• /
• pp.421-428
• /
• 2017

The spatial distribution and abundance of fish species was estimate near Dok-do, East Sea of Korea by conducting midwater trawl survey with hydroacoustic method. Acoustic and midwater trawl data were collected onboard the R/V Tamgu 21 during 7-8 March 2016. Acoustic data were collected at the frequencies of 38 and 120 kHz and converted to nautical area scattering strength ($m^2/nmile^2$). Species are distributed mainly over an extent of 30-55 m, generally around southwest of Dok-do; the squid Watasenia scintillans was the dominant species found. The length-weight function and target strength of squid and other fishes were used to estimate the W. scintillans stock at 2499.1 tons and other fish at 43.8 tons during the winter season. The hydroacoustic method offers an approach for the determination of the biomass and vertical and spatial distributions of species aggregating near Dok-do, East Sea of Korea.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.371-376
• /
• 2016

A self-powered piezoelectric energy harvester was developed for the application in wireless sensor node. The energy harvester was evaluated with power generation characteristics for the wireless sensor node for structural diagnosis of the electric power system. The self-powered wireless sensor node was set to measure temperature, vibration frequency of the electric power system. A piezoelectric harvester composed of 7 uni-morph cantilevers (functionalized as 6 generators and 1 vibration sensor) was connected to be an array and revealed to produce significantly high output power of approximately 10 mW at 120 Hz under 3.4 g((1 g = $9.8m/sec^2$). The wireless sensor node could work as the electric power generated by the developed piezoelectric harvester.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2007

The purpose of this study was to investigate the difference in the stride-to-stride variability between two treadmill conditions; traditional treadmill and special treadmill whose speed can be adjusted automatically by subject's walking speed. Eight male subjects (25.1 years, 172.7 cm, 66.6 kg) were participated in treadmill walking experiment. First, preferred walking speed (PWS) of each subject was determined. Second, each subject performed walking experiment with fixed PWS condition and with free PWS condition for 10 minutes. 3D motion capture system (Motion analysis Corp., USA) with 6 cameras was used to collect motion data with sampling frequency of 120Hz. Temporal and spatial variables for stride-to-stride variability were calculated. Coefficient of variance (CV) which quantifies the amount of variability and Detrended Fluctuation Analysis (DFA) which explains the structure (self-similarity) of the variability were used for analysis. Results showed that the amount of variability during free PWS condition was greater than that of fixed PWS condition. DFA results showed that there was a statistical difference between two treadmill conditions for the variables of step length, stance time, and double support time. From these results, it is possible that traditional treadmill study might give incorrect conclusion about gait variability study. Further study is necessary to clarify these matters by considering the number of subjects, experimental time, and gait variables for the study of stride-to-stride variability.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.77-77
• /
• 2009

ELV(; End of Life Vehicles)를 비롯한 최근 환경 동향은 자동차 전장 모듈에 대하여 다양한 무연 솔더 적용을 요구하고 있다. 특히 자동차 엔진룸과 트랜스미션은 가동 중 고온 및 진동의 지속적인 영향을 받기 때문에 이와 유사한 환경에서의 신뢰성 연구가 필요한 시점이다. 이에 본 연구에서는 Sn3.5Ag, Sn0.7Cu, Sn5.0Sb 솔더 조성에 대하여 복합환경 조건하에서 접합부 신뢰성을 평가하였다. 복합환경을 구현하기 위하여 $-40{\sim}150^{\circ}C$ 범위의 온도 사이클과 랜덤 진동을 동시에 인가하였으며, 진동 가속도 3G, 진동주파수는 10~1000Hz 로 설정하여 자동차 환경을 충족하였다. 복합시험의 1 cycle 은 20 시간이며, 총 120 시간의 시험 동안 진동의 영향 및 진동과 고온이 동시에 작용하였을 경우의 영향에 대해 비교하였다. 테스트 모듈 제작을 위해 450 um 의 솔더볼이 적용되었으며, 각 조성의 솔더볼을 이용하여 BGA test chip 제작하였고, 제작된 BGA test chip 은 다시 daisy chain PCB 위에 실장 및 리플로우 공정을 통해 접합되었다. 테스트 동안 In-situ 로 저항의 변화를 관찰하여 파단의 유무를 판단하였고 전자주사현미경을 통해 파괴 기전을 평가하였다. 복합시험 시간에 따른 전단강도를 측정하였으며, 각 조성에 대하여 상이한 전단강도 변화를 관찰하였다. 계면 IMC 형상은 전단강도 변화에 영향을 주었으며, 특히 높은 온도가 IMC 성장을 촉진시켜 전단강도 감소에 영향을 주었다. 본 복합환경 시험 조건에서는 Sn0.7Cu 가 가장 안정적이었으며, 파단면을 관찰한 결과 연성파괴 모드가 관찰되었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.376-385
• /
• 2017

This study was conducted to understand the relationships between fish and zooplankton of distribution in the coastal waters of the East Sea from May to August 2016 using hydroacoustic. To distinguish between fish and zooplankton, we used the time varied threshold (TVT) method at the frequency of 120 kHz. As a result, the mean nautical area scattering coefficient (NASC) of fish was highest at $913m^2/n.mile^2$ in June and lowest at $315m^2/n.mile^2$ in July. The mean NASC of zooplankton was highest at $247m^2/n.mile^2$ in May and lowest at $70m^2/n.mile^2$ in July. The mean NASC of fish and zooplankton showed a significant difference (P < 0.05) with high correlation ($R^2=0.84$). In addition, there was no significant difference in the mean NASC of fishes and zooplankton by depth (t-test, person correction = -0.17, p > 0.05).

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.409-415
• /
• 2012

$TiO_2$ thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature. Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. The effects of deposition pressure on the crystallization and electrical properties of $TiO_2$ films were investigated. The crystal structure of $TiO_2$ films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphous structure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing deposition pressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation of chemically stable $TiO_2$ films. The dielectric constant of $TiO_2$ films was significantly changed with deposition pressure. $TiO_2$ films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant and dissipation factor of films deposited at 70 mTorr were found to be 100~120 and 0.83 at 1 kHz, respectively. The temperature dependence of the capacitance of $TiO_2$ films showed the properties of class I ceramic capacitors. $TiO_2$ films deposited at 10~30 mTorr showed dielectric breakdown at applied voltage of 7 V. However, the films of 500~300 nm thickness deposited at 50 and 70 mTorr showed a leakage current of ${\sim}10^{-8}{\sim}10^{-9}$ A at 100 V.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.355-361
• /
• 2007

A giant jellyfish (Nemopilema nomurai), which is presumed developing in the East China Sea, is recently one of major issues in the Northeast Asia region due to its fatal damage to the fishery. The biomass estimates have generally been conducted by trawl sampling and sighting survey methods. The biological research is also needed to clarify such environmental origin or diurnal migration patterns. While trawl sampling or sighting survey methods are effective to investigate its density estimates in its distributed community of near bottom or surface, they have a problem in investigation on the vertical distribution of jellyfishes. In this case, an echo sounding detection would have an advantage to survey it more extensively and effectively. This trial was conducted to observe the vertical distribution of giant jellyfish, where thermocline strongly formed, during mooring at each station of the East China Sea and southern coastal area using acoustical and optical methods. By the results, they were observed to exit and move at the water column under the thermocline using the optical camera and echo sounder system, and the information was analyzed to find out the acoustical sound scattering characteristics relatives to 120kHz frequency. These results can be utilized effectively to estimate the vertical distribution and biomass of Giant jellyfish with comparing results from trawl sampling and sighting survey methods, hereafter.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.211-214
• /
• 2002

Properties of 52/48 PZT films with various thicknesses for piezoelectric micro-electro mechanical systems (MEMS) devices fabricated by multi-coating method on $Pt(3500{\AA})/Ti(400{\AA})/SiO_2(3000{\AA})/Si$(525$\mu\textrm{m}$) substrates were investigated. PZT films were deposited by spin-coating process at 3500 rpm for 30 sec, followed by pyrolysis at 45$0^{\circ}C$ for 10 min producing the thickness of about 120nm. These processes were repeated 4, 8, 12, 16 and 20 times in order to have various thicknesses, respectively. Finally, they were crystallized at $650^{\circ}C$ for 30 min. All thick PZT films showed dense and homogeneous surface microstructures. Thick PZT films showed crystalline structures of random orientations with increasing thickness. Dielectric constants of thick PZT films were increased with increasing film thickness and reached 800 at 100kHz for 2.3$\mu\textrm{m}$ thick PZT film. $P_r\; and\; E_c$ of 2.3$\mu\textrm{m}$ thick PZT films were about 20$\mu$C/$\textrm{cm}^2$ and 63kV/cm. Depth profile analysis by Auger Electron Spectroscopy (AES) of 4800 $\AA$ thick PZT film showed the formation of the perovskite phase on Pt layer by Pb diffusion behavior. It was considered that Pb-Pt intermediate layer promoted PZT (111) columnar structures.