• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.823-829
• /
• 2004

In this paper, non-self-aligned SiGe HBTs with ${f}_\tau$ and${f}_max $above 50 GHz have been fabricated using an RPCVD(Reduced Pressure Chemical Vapor Deposition) system for wireless applications. In the proposed structure, in-situ boron doped selective epitaxial growth(BDSEG) and TiSi$_2$ were used for the base electrode to reduce base resistance and in-situ phosphorus doped polysilicon was used for the emitter electrode to reduce emitter resistance. SiGe base profiles and collector design methodology to increase ${f}_\tau$ and${f}_max $ are discussed in detail. Two SiGe HBTs with the collector-emitter breakdown voltages ${BV}_CEO$ of 3 V and 6 V were fabricated using SIC(selective ion-implanted collector) implantation. Fabricated SiGe HBTs have a current gain of 265 ∼ 285 and Early voltage of 102 ∼ 120 V, respectively. For the $1\times{8}_\mu{m}^2$ emitter, a SiGe HBT with ${BV}_CEO$= 6 V shows a cut-off frequency, ${f}_\tau$of 24.3 GHz and a maximum oscillation frequency, ${f}_max $of 47.6 GHz at $I_c$of 3.7 mA and$V_CE$ of 4 V. A SiGe HBT with ${BV}_CEO$ = 3 V shows ${f}_\tau$of 50.8 GHz and ${f}_max $ of 52.2 GHz at $I_c$ of 14.7 mA and $V_CE$ of 2 V.

• 한국진공학회지
• /
• 제2권1호
• /
• pp.17-22
• /
• 1993

본 논문은 포항가속기연구소에서 건설중인 PLS 2 GeV 선형가속기 진공계통의 설계에 관한 것이다. PLS 2GeV 선형가속기의 진공계통은 길이 3.07m인 42개의 가속관과 길이 약 400m의 도파관으로 구성되어 있다. 진공장치의 배치는 충분한 지역적 배기능력을 고려한 분산 배기방식으로 다지관 방식의 기계적 복잡성을 단순화하였다. 진공계는 가속관 중심과 도파관에서 5$\times$10-7Torr, 클라이스트론 출력장치에서 5$\times$10-8Torr까지 배기되도록 설계하였다. 주 진공펌프로는 가속관과 도파관 및 에너지 배가장치에 대하여 각각 용량이 60l/s와 120l/s인 sputter 이온펌프를 사용하기로 하였다.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.143-147
• /
• 2001

The dosimetric properties of Ge- and Er-doped optical fibres are studied. The Ge-doped fibre is found to be more sensitive to radiation and there is little fading of TL signal compared with Er-doped fibre. The Ge- and Er-doped fibres showed a linear response over a range of ${\sim}1\;Gy$ to about 120 Gy and ${\sim}1Gy$ to about 250Gy respectively. The Ge-doped fibre is found to be dose-rate independent both for photons and electron beams of energy ranging from 6 to 10 MeV and 6 to 12 MeV respectively. The fibre is energy independent for energy greater than ${\sim}0.1\;MeV$ for photon or 0.1 MeV for electron beam. From the depth-dose measurement, it was found that the position of maximum dose, dmax, increased with increasing energy ranging from ${\sim}2\;cm$ and ${\sim}2.5\;cm$ for 6 MeV and 10 MeV photons respectively. The central axis percentage depth dose at 10 cm depth was found to be in good agreement with the value obtained using ionization chamber.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.154-155
• /
• 2003

Substituting transition metals such as V, Cr, Mn, Fe, Co and Ni into semiconductors have been of interest because of its unique electrical and magnetic properties. It was reported that the magnetoresistance(MR) ratio of CrGe was 1.7% and 1 4% at 120 K in fields of 0.5 and 5 T, respectively. The MR ratio of FeGe was 19% at 180K. The electrical resistivity of CrGe changed according to Cr concentration. In this talk, we report transport properties of V-doped Ge single crystals with several different V concentrations. The carrier densities and mobilities will be determined from Hall measurement.

• 대한방사선방어학회:학술대회논문집
• /
• 대한방사선방어학회 2010년도 춘계 학술발표회 및 심포지엄
• /
• pp.94-95
• /
• 2010

The accuracy of typical dosimeters used around high energy accelerator were proved by dose rate measurements. The experimental neutron spectrum were useful for improving high energy Monte Carlo codes by validating the implemented models. In series of this joint research the experimental data will be upgrade successively. This research program is opened to experts and students in Korea, too.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.120-122
• /
• 2003

We have been investigated phase-change with temperature and electric field in chalcogenide $Ge_2Sb_2Te_5$ thin film. $T_c$(crystallization temperature) is confirmed by measuring the resistance and conductivity with the varying temperature on the hotplate. We have measured I-V characteristics with $Ge_2Sb_2Te_5$ chalcogenide thin film. It is compared with I-V characteristics after impress the variable pulse. The pulse has variable height and duration that used voltage and current source.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1365-1367
• /
• 1995

The PLS 2-GeV linac employs 11 units of high-power pulsed klystrons(80MW) as the main RF sources. The matching modulators of 200 MW(400kV, 500 A) can provide a flat-top pulse width of 4.4 ${\mu}s$ with a maximum pulse repetition rate of 120 Hz at the full power level. For a good stability of electron beams, the pulse-to-pulse flat-top voltage variation of a modulator requires less than 0.5%. In order to achieve this goal, we stabilized high voltage charging power supplies within 1% by a phase controlled SCR voltage regulator. In addition, we employed ac/dc feedback together with a resistive De-Q'ing system to achieve far less than 0.5% variation of the PFN charging voltage. This paper presents the main feature of the klystron-modulator system and the characteristics of the pulsed high-power RF system performance during the beam injection operation for the Pohang Light Source commissioning.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1584-1589
• /
• 2014

본 연구는 경기도 소재 S 대학병원에서 2013년 7월부터 8월까지 GE 사의 DECT(Dual Energy Computed Tomography)를 이용하여 방사선 투과 및 불투과성 물질을 임의로 선정, 에너지 영역 대별로 투과 및 불투과성 물질의 CT 값을 분석하였다. 또한, CT 값 분석 법을 이용하여 기존의 SECT(Single Energy Computed Tomography)에서 적용되는 120kVp CT 값과 가장 유사한 에너지 영역대를 도출하였으며 임상 적용 시 가시 영역 범위 내에서 대조도를 주었을 때 가장 유용하며 적절한 물질을 알아보았다. 결론으로 생리식염수, 메틸셀룰로스, 초음파용 젤과 같이 밀도가 낮고 수분 함유량이 많은 경우 90KeV 이후 CT 값의 감소가 거의 없었으며, 공기와 조영제처럼 밀도가 매우 낮거나 높은 물질의 경우 에너지의 영향을 적게 받는 것으로 분석되었으며 메틸셀룰로오스와 초음파 젤의 경우 임상 적용 시 가장 유용성이 있는 물질로 사료된다.

• 한국미생물·생명공학회지
• /
• 제49권2호
• /
• pp.201-209
• /
• 2021

Agarwood (Aquilaria spp) has high economic value. However, essential oil production from agarwood is a time-consuming process. Additionally, agarwood leaves have not been utilized even though they contain various bioactive ingredients. In this study, agarwood leaves were fermented using Lactobacillus plantarum ATCC 8014 with or without Stevia (4, 8, and 12%; v/v). The fermented fluid was mixed with maltodextrin (15%; w/v) and subjected to spray drying (inlet temperature, 120℃; outlet temperature, 65-70℃). The contents of polyphenols, polysaccharides, saponins, and flavonoids and the viability of L. plantarum were determined. Fermentation enhanced the levels of bioactive compounds. The contents of polyphenol (69.19 ± 4.05 mg GAE/g of sample), polysaccharide (20.75 ± 0.98 mg GE/g of sample), saponin (305.23 ± 4.21 mg OAE/g of sample), and flavonoid (7.86 ± 0.72 mg QE/g of sample), and the viability of L. plantarum (8.72 ± 0.17 log CFU/ml) were markedly upregulated in the samples containing Stevia (12%; v/v). This indicated that the supplementation of Stevia during fermentation decreases the fermentation time (9 h), upregulates bioactive compound production in agarwood leaves, enhances microencapsulation during spray drying, and increases the viability of L. plantarum under simulated gastric digestion conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.556-558
• /
• 1996

PLS 2-GeV linac has 11 sets of high power klystron-modulator system as a main RF source for the beam acceleration. The modulators can provide 200-MW peak pulsed power(400-kV, 500-A) with a pulse width of $7.5{\mu}s$(ESW), a maximum pulse repetition rate of 120-Hz at the full power level. The DC power supply provides a 25-kV, 7-Adc and the charging system consists of a charging inductor, charging capacitor, and the diode for reverse current protection. The charged PFN voltage by a LC resonant charging method has two times of the DC high voltage and the pulsed power is delivered to the load by a thyratron switch. To reduced the press of high voltage lit thyratron switch, the command charging is the best method. In this article, the high voltage switch for the command charging method is tested to the start work and the system is presented with the experiment results of the trigger and operational characteristics.