• Journal of dental hygiene science
• /
• v.11 no.3
• /
• pp.155-161
• /
• 2011

The purpose of this study was to obtain data necessary for guiding students in the future by grasping which rate of error is made how much depending on a shooting technique in the filming of periapical radiograph. 14,402 films, which were instructed targeting students for the Department of Dental Hygiene at D Health College and S Health College, were analyzed. The following results were obtained by conducting questionnaire survey targeting 263 students who completed the shooting practice lesson of bisecting angle technique and paralleling technique. 1. In case of having shot with bisecting angle technique, the ratio of error was the highest in both maxillary and mandibular first molar. 2. In case of having shot with paralleling technique, the ratio of error was the highest in the maxillary bicuspid and the mandibular first molar. 3. As for ratio of error in light of a shooting technique, both bisecting angle technique and paralleling technique were indicated to be the highest in inaccuracy of film position. The bisecting angle technique was indicated to have the higher ratio of error compared to the paralleling technique. 4. As for ratio of error in light of the processing technique, both bisecting angle technique and paralleling technique were indicated to be the highest in dark image and light image. The bisecting angle technique was indicated to have the higher ratio of error compared to the paralleling technique. 5. Students were indicated to feel it to be most difficult for grasping the processing level in the film-developing process. As the above results, to reduce ratio of error given the periapical radiography, a method of reducing ratio of error given the periapical radiography is considered to be what correctly understands the morphological and anatomical structure inside the mouth and what acquires the shooting technique by filming several times with having enough time.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.792-799
• /
• 2019

The present study aims to investigate the fluorination of thorium oxide ($ThO_2$) by ammonium hydrogen difluoride ($NH_4HF_2$). Fluorination was performed at room temperature by mixing $ThO_2$ and $NH_4HF_2$ at different molar ratios, which was then left to react for 20 days. Next, the mixtures were analyzed using X-ray diffraction (XRD) at the intervals of 5, 10, 15, and 20 days, followed by the heating of the mixtures at $450-750^{\circ}C$ with argon gas flow. The characterization of $ThF_4$ was established using X-ray diffraction (XRD) and scanning electron microscopy-dispersion X-ray spectroscopy (SEM-EDX). In this study, ammonium thorium fluoride was synthesized through the fluorination of $ThO_2$ at room temperature. The optimum molar ratio in synthesizing ammonium thorium fluoride was 1.0:5.5 ($ThO_2:NH_4HF_2$) with 5 days reaction time. In addition, the heating of ammonium thorium fluoride at $450^{\circ}C$ was sufficient to produce $ThF_4$. Overall, this study proved that $NH_4HF_2$ is one of the fluorination agents that is capable of synthesizing $ThF_4$.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.331-334
• /
• 1996

New copper(Ⅱ) complex of the pentaaza non-macrocyclic ligand 1-(2-aminoethyl)-3-(N-{2-aminoethyl}aminomethyl)-1,3-diazacyclohexane (2) and a dinuclear copper(Ⅱ) compex of the bis(macrocyclic) ligand 3, in which two 1,5,8,10,12,15-hexaazabicyclo[11.3.11.5]heptadecane subunits are linked together by an ethylene chain through the uncoordinated nitrogen (N10) atoms, have been prepared selectively by the reaction of the metal ion, 1,4,8-triazaoctane, ethylenediamine, and formaldehyde. The dinuclear complex [Cu2(3)]4+ has been also prepared by the reaction of [Cu(2)]2+ with ethylenediamine and formaldehyde. The reaction products largely depend on the molar ratio of the reactants employed. The mononuclear complex or each macrocyclic subunit of the dinuclear complex contains one 1,3-diazacyclohexane ring and has a square-planar geometry with a 5-6-5 or 5-6-5-6 chelate ring sequence. In acidic solution, the copper(Ⅱ) complex of 2 dissociates more slowly than those of other related non-cyclic polyamines.

• Korean Journal of Materials Research
• /
• v.30 no.12
• /
• pp.655-659
• /
• 2020

Hydrogen isotopes (i.e. deuterium and tritium) are supplied to the tokamak in the International Thermonuclear Experimental Reactor (ITER) fuel cycle. One important part of the ITER fuel cycle is the recycling of unused fuel back to the tokamak, as almost 99 % of fuel is unburned during fusion reaction. For this, cryogenic distillation has been used in the isotope separation system (ISS) of ITER, but this technique tends to be energy-intensive and to have low selectivity (typically below 1.5 at 24 K). Recently, efficient isotope separation by porous materials has been reported in the so-called quantum sieving process. Hence, in this study, hydrogen isotope adsorption behavior is studied using chemically stable ZIF-11. At low temperature (40 K ~ 70 K), the adsorption increases and the sorption hysteresis becomes stronger as the temperature increases to 70K. Molar ratio of deuterium to hydrogen based on the isotherms shows the highest (max. 14) ratio at 50 K, confirming the possibility of use as a potential isotope separation material.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.172-178
• /
• 2020

In this study, the optimization of the biodiesel production process from waste oil using microwave with response surface methodology (RSM) was conducted. The microwave irradiation time and power in addition to the alcohol/oil mole ratio were chosen as process parameters. Also the fatty acid methyl ester (FAME) content (over 96.5%) and kinematic viscosity (1.9~5.5 cSt) were selected as response values. From basic experiments, the range of quantitative factors were set as following; 4~6 min, 400~600 W, and 7~9 for the microwave irradiation time and power, and alcohol/oil molar ratio, respectively. The optimum conditions for the methanolysis were 5.0~5.1 min, 481.3~525.5 W, 7.9~8.4, and 2.0 or 3.0 mg KOH/g for the microwave irradiation time and power, methanol/oil molar ratio, and each acid value, respectively. The FAME content and kinematic viscosity were predicted as 97.49~96.34% and 4.01~4.12 cSt, respectively, under the condition above. Under the optimum experimental conditions, the results showed that the FAME content and kinematic viscosity of 97.82~96.42% and 4.07~4.16 cSt, respectively were measured and the mean error rates were 0.22% and 0.98%, respectively.

• Korean Journal of Microbiology
• /
• v.29 no.5
• /
• pp.307-313
• /
• 1991

A yellow-green, fluorescent siderophore A3 was extracellularly produced under iron-limited growth conditions from Pseudomonas synxantha A3. The physicochemical and biological properties of siderophore A3 were examined. The approxiamte molecular weights of the Fe(III)-siderophore A3-1 complex and Fe(III)-siderophore A3-2 complex were estimated to be about 1,300 and 1,100, respectively, by Bio-gel P2 gel exclusion chromatography. The molar ratio between the siderophore and the Fe(III)was 1.08 mole. The molecular weight of the complex could be calculated with this ratio and the new values were 1,150 and 960, respectively. The binding constant(K) between thesiderophore A3 and Fe(III) that determined by displacing the iron from the Fe(III)-siderophore complex with EDTA was 4.12*10$^{18}$ at pH 5.0. Siderophore A3 appeared to have antibacterial activity on several bacterial strains, however, ferric siderophore Ae complex did not show that activity. The cytotoxicity of siderophore A3 was obtained from Human Chronic Myelogenous Leudemia K562 cells. Inhibition concentration (50%)($IC_{50}$ ) was $0.17\mu$\{g/ml}.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.387-391
• /
• 2015

This study was performed to evaluate the effect of pH (8-12) and molar ratio of magnesium and phosphate ($[Mg^{2+}]/[PO_4{^{3-}}]$) (0.6-1.4) on struvite crystallization of anaerobic digester supernatant using seawater as magnesium source. pH range of 9-10 is favorable for ammonium and phosphate recoveries. The recovery efficiency of ammonium was highest at $[Mg^{2+}]/[PO_4{^{3-}}]$ of 1.0 and pH 10. On the other hand, high phosphate recovery efficiency (> 99%) was achieved at ($[Mg^{2+}]/[PO_4{^{3-}}]$) of 1.4 and pH 10. The results demonstrated that seawater can be considered as low-cost magnesium source to recover phosphorus from anaerobic digester supernatant.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.721-728
• /
• 2011

1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl-(POS)-glycerol-enriched reaction products were synthesized from camellia oil, palmitic ethyl ester, and stearic ethyl ester via lipase-catalyzed interesterification. Response surface methodology (RSM) was employed to optimize the production of the POS-enriched reaction product (Y1, %) and the stearicand palmitic-acid contents at the sn-2 position due to acyl migration (Y2, %). The reaction factors were the enzyme amount (X1, 2-6%), reaction time (X2, 60-360 min), and substrate molar ratio of camellia oil to palmitic ethyl ester and stearic ethyl ester (X3, 1-3 mol). The predictive models for Y1 and Y2 were adequate and reproducible as no lack of fit was signified (0.128 and 0.237) and as there were satisfactory levels of R2 (0.968 and 0.990, respectively). The optimal conditions for the reaction product for maximizing Y1 while minimizing Y2 were predicted at the reaction combination of 5.86% enzyme amount, 60 min reaction time, and 1:3 substrate molar ratio (3 moles of palmitic ethyl ester and 3 moles of stearic ethyl ester). Actual reaction was performed under the same conditions as above, and the resulting product contained 20.19% TAG-P/O/S and 12.71% saturated fatty acids at the sn-2 position.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.78-86
• /
• 1986

single crystals of various hexagonal ferrites were grown by a flux technique. For the growing experiment platinum crucibles of size 40 cc and a horizontal siliconit tube furnace were used. Charges consisted of the flux of BaO(SrO)/$B_2O_3$ and the composition of crystals in the system of BaO $(SrO)-Fe_2O_3-ZnO$. The BaO(SrO)/$B_2O_3$ molar ratio of the flux were varied from 1 to 3. Crystals up to 12.5mm in diameter were grown by slow cooling of melts from a maximum temperature of 1, 30$0^{\circ}C$or 1, 350$0^{\circ}C$ to 95$0^{\circ}C$ or 1, 00$0^{\circ}C$ The grown crystals exhibited a tabular hexagonal habits with very well developed ba-sal planes and narrow pyramidal faces of {1011} {1012} and {0001}. For the identification of the grown crystals X-ray diffraction studies were carried out. The effects of va-riations in flux ratio flux percentage and cooling rate on the quality of the grown crystals were studied. Cry-stal habits hillocks etch steps and growth spirals were observed by optical microscope. Magnetic properties of single crystals were measured.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.