• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.179-183
• /
• 2002

Resonance-enhanced multiphoton ionization with time-of-flight product imaging of the $N(^2D)$ atoms has been used to study the $N_2O$ photodissociation at 118.2 nm and the two-photon dissociation at 268.9 nm. These imaging experiments allowed the determination of the total kinetic energy distribution of the $NO(X^2{\prod})$ and $N(^2D_{5/2})$ products. The $NO(X^2{\prod})$ fragments resulting from the photodissociation processes are produced in highly vibrationally excited states. The two-photon photodissociation process yields a broad $NO(X^2{\prod})$ vibrational energy distribution, while the 118.2 nm dissociation appears to produce a vibrational distribution sharply peaked at $NO(X^2{\prod},\;{\nu}=14)$.

• 센서학회지
• /
• 제11권2호
• /
• pp.118-123
• /
• 2002

$ZnGa_2O_4$ 형광체 박막을 기판 온도를 $550^{\circ}C$에 고정시키고 산소 분압을 100, 200, 300 mTorr로 변화시키며 $Al_2O_3$(0001) 기판 위에 펄스 레이저 증착법을 이용하여 증착하였다. 다른 산소 분압에서 성장한 박막들의 미세 결정구조와 형광특성을 조사하였으며, 산소분압이 증가할수록 박막의 결정성이 변화하였으며 박막의 조성비가 다름을 형광특성을 통하여 알 수 있었다. 발광 스펙트럼은 460 nm에서 최고 피크값 을 나타내었으며, 300 nm에서 600 nm까지 갖는 넓은 밴드의 형광 특성을 나타내었다. 최적의 조건에서 성장된 박막의 형광 밝기를 고려해볼 때 $Al_2O_3$(0001) 기관이 우수한 $ZnGa_2O_4$ 형광체 박막을 성장시킬 수 있는 기판들 중 하나임을 확인하였다.

• 한국광학회지
• /
• 제11권2호
• /
• pp.114-118
• /
• 2000

현재까지 62개의 레이저선이 발견된 셀레늄증기 다중광선레이저에서 일반적으로 사용하는 $^4He$ 대신에 동위원소인 $^3He$을 펌핑가스로 최초로 사용하여 개개의 레이저선들에 대한 광이득과 레이저의 출력특성을 연구하였다. 대부분의 선들이 $^4He$ 방전보다 $^3He$ 방전에서 더 높은 output-coupling 출력과 소신호 이득을 보여 주었고, 특히 갈력한 설들(497.6 nm, 499.3 nm, 506.9 nm, 517.6 nm, 522.8 nm, 530.5 nm)은 2배의 output-coupling출력과 25% 더 높은 소신호 이득을 보여 주었다.

• Medical Lasers
• /
• 제9권2호
• /
• pp.110-118
• /
• 2020

The non-ablative fractional dual laser is equipped with two types of lasers, 1550 nm and 1927 nm in one device, and was approved by the United States Food and Drug Administration in 2013. The advantages of the non-ablative fractional laser (NAFL) include fewer side effects such as erythema, edema, post-laser pigmentation, and scab formation. Thus, the NAFL is preferred by both practitioners and consumers because it is convenient and safe for use. The 1550 nm erbium glass and 1927 nm thulium lasers are representative NAFLs that have been developed separately and are often used as a single-wavelength laser with proven clinical efficacy in various indications. The 1550 nm wavelength laser penetrates the dermis layer and the 1927 nm wavelength laser is effective for epidermal lesions. Therefore, targeting the skin layer can be easily achieved with both the 1550 and 1927 nm lasers, respectively, or in combination. Clinically, the 1550 nm laser is effective in the treatment of mild to moderate sagging and wrinkles, scars, and resurfacing. The 1927 nm laser improves skin texture and treats skin pigmentation and wounds. It can also be used for drug delivery. The selection and utilization rate of NAFL has been increasing in recent times, due to changes in lifestyle patterns and the need for beauty treatments with fewer side effects and short downtime. In this study, we present a plan for safe and effective laser therapy through a review of literature. Clinical applications of the multifunctional NAFL are also described.

• 센서학회지
• /
• 제6권4호
• /
• pp.252-257
• /
• 1997

ITO(indium-tin-oxide)/PPV(poly(p-phenylenevihylene))/음극 전극의 단층구조와 ITO /PVK(poly(N-vinylcarbazole))/PPV/음극전극의 이층구조를 가진 유기 EL(electroluminescence) 소자를 제작하였으며, 전기-광학적 특성을 측정하였다. 실험 결과, 단층구조에서는 PPV막의 열변환 온도를 $140^{\circ}C$에서 $260^{\circ}C$로 증가할수록 최대 휘도가 $118.8\;cd/m^{2}$(20V)에서 $21.14\;cd/m^{2}$(28V)으로 감소하였고, EL 스펙트럼의 최대 피크가 500nm에서 580nm로 이동하였다. 또한, 음극전극의 일함수가 낮을수록 소자의 발광휘도와 주입 전류는 증가되었다. 이층구조에서는 PVK막의 농도가 감소함에 따라 발광휘도가 $70.71\;cd/m^{2}$(32V)에서 $152.7\;cd/m^{2}$(26V)으로 증가하였다.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.118-123
• /
• 2004

A formation of aluminum hydroxide by hydrolysis reaction in the water has been studied by using nano aluminum powder fabricated by pulsed wire evaporation(PWE) method. The hydroxide type and morphology depending on temperature and pH were examined by structural analysis. The Boehmite($Al_2O_3$.$H_2O$ or AIO(OH)) was predominantly formed in high temperature region over 4$0^{\circ}C$, while the Bayerite($Al_2O_3$.$H_2O$ or $Al(OH)_3$) below $30^{\circ}C$ of hydrolysis temperature. The Boehmite formation was preferred to the Bayerite in acidic solution in the same hydrolysis temperature. The slowly formed Bayerite phase showed facet crystalline structure, while the fast formed Boehmite was fine fiber with a large aspect ratio of several nm in diameter and several hundred nm in length, and with much larger specific surface area(SSA) than that of Bayerite. The highest SSA was about $420m^2$/g.

• 대한화학회지
• /
• 제37권1호
• /
• pp.112-118
• /
• 1993

수용성 발색시약인 N,N'-oxalylbis(2-pyridyl-3'-sulphobenzoylhydrazone)을 합성하여 분광광도법 및 1, 2차 미분 분광광도법에 의한 구리의 정량법을 개발하였다. 정량은 구리착물 수용액(pH 1.89)의 흡광도 및 1,2차 미분값을 379, 395, 363 그리고 421nm의 파장에서 각각 측정함으로써 수행되었다. 정량 가능한 구리의 농도 범위는 0.12~1.20${\mu}g$ /ml 였으며 이 방법을 알루미늄 합금시료의 분석에 적용하였다. 2차 미분 분광광도법으로 421nm에서 측정했을 때가 가장 좋은 결과를 나타내었다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.118-124
• /
• 2016

In this study, experiments are conducted to improve spray coating uniformity by using second and third electrodes based on the electrospray atomization mechanism. The uniformity of fabricated thin films can be improved by adjusting the design of the second electrode. The implementation of the second electrode with an elongated hole and a bending angle of $90^{\circ}$ results in highly uniform films. In addition, induced area to substrate is increased by lowering the applied voltage using the third electrode with a round rod shape. A linear correlation between applied voltage and induced area is confirmed. Thin film thickness and surface roughness are measured after the fabrication of thin films through the electrospray process. It is confirmed that a thin film is formed having an average thickness of 273.44 nm, a thickness uniformity of less than 10%, and a surface roughness of 3 nm.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.118-124
• /
• 2003

Silver nanoparticles was synthesized by the method of W/O microemulsions with AOT (bis(2-ethylhexyl) sodium sulfosuccinate). The nucleation particle growth and aggregation was controlled by the droplet exchange process. The intermicellar exchange reaction is varied by changing the AOT and the $H_2O$ concentration. The synthesized W/O microemulsions was found to give the nanoparticles, which was confirmed by SEM, TEM, particle-size-analyzer, and UV-spectrometer. The most stable particles was obtained at 0.056 mole AOT solution, and the particle size distribution was found in the range from 27 to 31 nm. The mean particle size was reduced by adding Tween 20 significantly, and distribution was found from 14 to 16 nm. And, It's size was reduced by cosurfactants as toluene and benzyl alcohol. In case of toluene and benzyl alcohol, the range of particle size was found 7${\sim}$11 nm and 8${\sim}$12 nm.

• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.112-118
• /
• 1981

A study was made on the processing of domestic blast furnace slag by flotation and chemical purification for the use of slag as a raw material in making soda lime glasses. Feasibility study has been made for the use of reprocessing slag as a source material for both coloring and chemical components (such as CaO, $Al_2O_3$, MgO and etc.) in the glass making process. Chemical composition of chemically purified slags ranges; $SiO_2$ 34.5~37.5, $Al_2O_3$, 16.2~14.1, $Fe_2O_3$ 0.33~0.14, CaO 34.5~38.8, MgO 4.0~5.2, NmO 0.16~0.39, $TiO_2$ 0.23~0.35, S 0.08~0.42, ignition loss 3.3~8.4 and others 0.48~0.51%. It was found that either amber or greenish color could be easily obtained with the addition of salg up to 24%, however the slag addition to glass batches much impaired the transmitancy of glass products, thus a glass made with 7% slag addition showed 82% in transmitancy value at 510 nm.