• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.149-154
• /
• 2019

The information matter-element system was built to assess safety of water source. Based on the thought of multiindex fusion, fuzzy matter-element model evaluating water source behavior was constructed by matter-element transform. This model can process comprehensively hydrogeological data, ecological environment, water pollution, surface disturbance, and so on. Water source safety behavior can be described by the qualitative and quantitative manners. According to the development trend of quantitative results, water source safety behavior can be expressed dynamically. As an example, the proposed method was used to assess safety status of 7 water sources in the region. The numerical example shows that the proposed method is feasible and effective, and the evaluation results are reasonable.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.251-257
• /
• 2019

Fabricating hydrophobic porous membrane is important for exploring the applications of membrane distillation (MD). In the present paper, poly(vinylidene fluoride) (PVDF) hollow fiber membrane was modified by coating polydimethylsiloxane (PDMS) on its surface. The effects of PDMS concentration, cross-linking temperature and cross-linking time on the performance of the composite membranes in a vacuum membrane distillation (VMD) process were investigated. It was found that the hydrophobicity and the VMD performance of the PVDF hollow fiber membrane were obviously improved by coating PDMS. The optimal PDMS concentration, cross-linking temperature and cross-linking time were 0.5 wt%, $80^{\circ}C$, and 9 hr, respectively.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.83-89
• /
• 2019

The most common way of reducing non-point source pollutants from agricultural areas is the installation of reservoirs. However, this method is only effective for surface runoff of settleable pollutants. This study was conducted to estimate the effect of interflow, baseflow, and surface runoff on pollutant runoff in a small agricultural catchment. Runoff of organic matters, SS, and T-P were directly proportional to the rainfall variation, while ammonia and nitrate were inversely proportional to the amount of rainfall. The interflow and baseflow was only 46% of the total stream flow, but the nitrate load reached 78%. The interflow as a nutrient transport pathway should be considered for managing a stream water quality. It requires careful attention and appropriate control methodology such as vegetation to consider the influence by interflow. The reservoir as a dry extended detention pond (DEDP) has function of nutrient captor.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.39-44
• /
• 2019

LID facilities do not consider environmental factors, and due to inappropriate vegetation planting causing degradation in efficiency due to plant damage and difficulty in maintenance. Therefore, in this study, assessment of impact environmental factor by seasonal variation of chlorophyll and growth of vegetation planted in LID technologies and change of pollutant reduction were conducted. In the case of B-SJ and B-RI, growth rate decreased after summer (August), and B-MG showed steady growth until autumn (September). Chlorophyll was found to increase during spring season while it decreased during autumn season. The chlorophyll concentration was found to affect the plant growth pattern. TN reduction efficiency was highest with greater than 80% efficiency in summer, and it was analyzed that plants were identified as the main factor affecting the seasonal reduction efficiency of TN. Also, temperature and relative humidity were analyzed to affect plant growth, activity and pollutant removal efficiency. Plant type and growth pattern are considered as factors to be considered in selection of appropriate plant types in LID technologies.

• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.191-199
• /
• 2019

In this study, we investigated the cultivation possibility using Hydrodictyon reticulatum in a continuous raceway pond as a tertiary sewage treatment plant. The cultivation possibility was evaluated by varying the light quantity, wavelength, and hydraulic retention time (HRT). Experimental results showed that the growth rates of algae and the removal efficiencies of nutrients increased as the light quantity increased, and the maximum photosynthetic rate was maintained at $100{\mu}mol/m^2{\cdot}s$ or higher. When wavelength was varied, nutrient removal efficiency and growth rate increased in the following order: green light, red light, white light, and blue light. The nutrient removal efficiencies and algae productivity in HRT 4 d were better than in HRT 8 d. We conclude that if Hydrodictyon reticulatum is cultivated in a raceway pond and used as a tertiary treatment facility in a sewage treatment plant, nutrients can be effectively removed, and production costs can be reduced.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.431-440
• /
• 2019

A novel composite membrane was synthesized using crosslinked polyamide and fly ash ceramic substrate for phenol removal. Glutaraldehyde was used as crosslinker. Characterization shows that synthesized membrane possesses good permeability ($0.184l.m^{-2}.h^{-1}.kPa^{-1}$), MWCO (1.7 kDa), average pore size (1.08 nm) and good chemical stability. RSM was adopted for phenol removal studies. Box-Behnken-Design using quadratic model was chosen for three operating parameters (feed phenol concentration, pH and applied pressure) against two responses (phenol removal, flux). ANOVA shows that model is statistically valid with high coefficient of determination ($R^2$)value for flux (0.9897) and phenol removal (0.9302). The optimum conditions are obtained as pH 2, $46mg.l^{-1}$ (feed phenol concentration) and 483 kPa (applied pressure) with 92.3% phenol removal and $9.2l.m^{-2}.h^{-1}$ flux. Data validation with deviation of 4% confirms the suitability of model. Obtained results reveal that prepared composite membrane can efficiently separate phenol from aqueous solution.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.111-119
• /
• 2022

In this research, bentonite was intercalated with CMC and then two different percentages of glutaraldehyde (5 & 10%) were added as a crosslink agent to achieve non water-soluble composites. Then the composites were coated on clay-based microfiltration membranes which were synthesized in the previous work of the authors. The XRD technique was used to track the intercalation mechanism and FTIR was used to study the crosslink procedure. SEM was used to study the microstructure and morphology of the coated samples and then the ability of non-coated and coated samples for removal of Cr³⁺ ions was studied and compared. It was seen that the samples coated with the synthesized composite including 10% of glutaraldehyde showed the best results and removed 99.7% of Cr³⁺ ions from water polluted with 5 ppm of Cr³⁺ ions.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.353-361
• /
• 2018

Fouling characteristics of humic substances on tight ultrafiltration (UF) membrane have been investigated. The tight UF membrane was prepared by blending polysulfone (PSf) in N.N-dimethylacetamide (DMAc) with 25%wt of Polyethylene glycol (PEG400) and 4%wt of acetone. Fouling characteristic of the modified PSf membrane was observed during peat water filtration in different trans-membrane pressure (TMP). It was found that the acetone modified membrane provided 13% increase in TMP during five hours of peat water filtration, where a stable flux was reached within 150 minutes. Meanwhile, the increase of TMP from 10 psig to 30 psig resulted in a fouling resistance enhancement of 60%. Furthermore, based on the fouling analysis, fouling mechanism at the first phase of filtration was attributed to intermediate blocking while the second phase was cake formation.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.393-403
• /
• 2018

In this research commercial polyethersulfone (PES) membrane was modified using $TiO_2$ nanoparticles (P-25 Degussa) and further irradiated using UV light to overcome the hydrophobicity and fouling nature of the membrane. Further the membranes were characterized using SEM and FTIR. Contact angle measurements study confirmed the hydrophilic tendency of the modified membrane by decreasing the contact angle from $73^{\circ}$ to $20.28^{\circ}$. The modified membranes showed higher flux and better anti-fouling properties as compared to the unmodified counterparts. The optimum conditions were found to be 0.5 wt% $TiO_2$ loading with 60 min membrane immersion and 10 min UV light illumination. The effect of different pH conditions of feed was analysed. Real wastewater filtration experiments also indicated better performance of modified membranes as opposed to neat PES membranes.