• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.618-627
• /
• 2016

This study numerically analyzes the characteristics of the velocity distribution for each location of a square-sectional $180^{\circ}$ bent duct using a Reynolds Stress Turbulent model. The flow parameters were varied, including the working fluids, inlet velocity, surface roughness, radius of curvature, and hydraulic diameter. The boundary conditions for computational fluid dynamics analysis were inlet temperatures of air and water of 288 K and 293 K, inlet air velocity of 3-15 m/s, inner surface roughness of 0-0.001 mm, radius of curvature of 2.5-4.5 D, and hydraulic diameter of 70-100 mm. The working fluid characteristics were highly affected by changes in the viscous force. The maximum velocity profiles in the bent duct were indicated when the $90^{\circ}$ section was in the region of X/D=0.8 and the $180^{\circ}$ section was in the region of Y/D=0.8. Lower surface roughness and higher radius of curvature resulted in a higher rate of velocity change. Also, an efficient measuring location downstream of the bent duct is suggested since the flow deviations were the most stable when the straight duct length was in the region of L/D=30. The minimum deviations at the same velocity conditions according to the hydraulic diameter were mostly indicated in the range of L/D=15-30 based on the standard deviation characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.798-809
• /
• 2023

In this study, we evaluated the impacts of land-based pollution sources on seawater and shellfish in the Jindongman area after 20.5 mm and 90.6 mm rainfall events. We analyzed sanitary indicator microorganisms used in survey management, such as total coliform, fecal coliform, Escherichia coli, and male-specific coliphage in Waste water treatment plant (WWTP), major inland pollution source,s seawater, and shellfish for 4 days after rainfall events. Our results showed that the range of coliform group and fecal coliform was 1.8-49 and <1.8-4.5 MPN (most probable number)/100 mL, respectively, after rainfall events in WWTP discharge water. Furthermore, the radius of the calculated impacted area of major inland pollution sources ranged from 5 to 798 m after 20.5 mm of rainfall and 30 to 1,031 m after 90.6 mm of rainfall. The fecal coliform of seawater at 30 stations in the shellfish growing area and areas adjacent to four stations was <1.8-130 and from <1.8-79 MPN/100 mL, respectively. The E. coli level of shellfish at 7 stations in the shellfish growing area was <18-220 MPN/100 g.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.3
• /
• pp.154-158
• /
• 2010

Numerical analysis is done to investigate the effects of pulse bias on the plasma processing characteristics like ion doping and ion nitriding by using fluid dynamic code with a 2D axi-symmetric model. For 10 mTorr of Ar plasma, -1 kV of pulse bias was simulated. Maximum sheath thickness was around 20 mm based on the electric potential profile. The peak electron temperature was about 20 eV, but did not affect the averaged plasma characteristics of the whole chamber. Maximum ion current density incident on the substrate was 200 $A/m^2$ at the center, but was decreased down to 1/10th at radius 100 mm, giving poor radial uniformity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.370-373
• /
• 1999

The purpose of this study is to research and develop PAn composite electrode for EDLC. EDLC cell of PAn composite electrode with 1M LiClO$_4$/PC brings out good capacitor performance below 4.0V. The radius of semicircle of PAn composite electrode adding 15wt% SP270 was absolutely small. The total resistance of EDLC cell mainly depended on internal resistance of the electrode. The discharge capacitance of PAn composite with 15wt% SP270 in 1st and 200th cycles was 42 and 42 F/g at current density of 1mA/cm$^2$. The capacitance of PAn composite with 15wt%. SP270 capacitor was larger than that of PAn capacitor without SP270. The coulombic efficiency of EDLC at discharge process of 1 and 200 cycles were 94 and 100% respectively. PAn composite EDLC with 15wt% SP270 content showed good capacitance and stability with cycling.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.361-370
• /
• 1980

Distribution coefficients of various elements with the strong acidic caion-exchanger, Dowex 50W-x8, 100∼200 mesh were investigated in various concentrations of succinic, hydrochloic acid and it's mixture. Based on these distribution coefficients,the experimental condition for their quantitative separation of those elements is established in 0.9 M hydrochloric acid as eluent, several examples of successful separations are described and the dependence of distribution coefficients on ionic radius is also discussed.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.130-134
• /
• 1995

A small signal gain coefficient of Nd:glass was measured and a cavity-dumped laser was constructed. To measure the small signal gain coefficient, we constructed a resonator consisting of Nd:glass, Pockels cell, polarizing beam splitter. The measured small signal gain coefficient was $0.088 cm_{-1}$ when the input energy was 100 J and the round-trip internal loss of the resonator was 56%. The cavity-dumped laser was constructed using Nd:glass. 2 m radius of curvature HR-mirrors, Pockels cell, polarizinig beam splitter and $\lambda/4$ plate. The output energy of cavity-dumped laser was 0.85 J at 140 J input energy and the laser pulse width was 8 ns.s 8 ns.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.1002-1008
• /
• 2016

An understanding of the coarsening process of the large fission gas pores in the high burn-up structure (HBS) of irradiated $UO_2$ fuel is very necessary for analyzing the safety and reliability of fuel rods in a reactor. A numerical model for the description of pore coarsening in the HBS based on the Ostwald ripening mechanism, which has successfully explained the coarsening process of precipitates in solids is developed. In this model, the fission gas atoms are treated as the special precipitates in the irradiated $UO_2$ fuel matrix. The calculated results indicate that the significant pore coarsening and mean pore density decrease in the HBS occur upon surpassing a local burn-up of 100 GWd/tM. The capability of this model is successfully validated against irradiation experiments of $UO_2$ fuel, in which the average pore radius, pore density, and porosity are directly measured as functions of local burn-up. Comparisons with experimental data show that, when the local burn-up exceeds 100 GWd/tM, the calculated results agree well with the measured data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.356-362
• /
• 1999

DECT(Digital Enhanced Cordless Telecommunications) is the communication protocol and the pico-cellular network that provides a PABX with mobile services on the local area within its cell radius of about 100 to 200m. Compared with GSM, DECT provides low-cost communication services based on the PSTN and it is an ideal supplementary method for the type of in-building mobile communication. In this paper we presented the implementation methods and techniques of the DECT data link communication layer that provided reliable communication services to the upper network layer by performing the functions of link controls, error controls, sequence controls, and flow controls.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.129-139
• /
• 1999

DECT(Digital Enhanced Cordless Telecommunications) is the communication protocol and the pico-cellular network that provides a PABX with mobile services on the local area within its cell radius of about 100 to 200m. Compared with GSM, DECT provides low-cost communication services based on the PSTN and it is an ideal supplementary method for the type of in-building mobile communication. In order to implement the data link communication layer of the DECT system, in this paper we analyzed and designed the structures and functions of it that provided reliable communication and real-time services to the upper network layer by performing the functions of link controls, error controls, sequence controls, and flow controls.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.291-297
• /
• 2013

Automated weather stations were installed at 9 locations with, three different elevations, (i.e., 50m, 100m, and 300m a.s.l.) with different slope and aspect in a small watershed ($50km^2$ area). Air temperature at 1500 LST and solar radiation accumulated for 1100-1500 LST were collected from January to December 2012. Topography of the study area was defined by a $30{\times}30$ m digital elevation model (DEM) grid. Accumulated solar irradiance was calculated for each location with the spatially averaged slope and aspect of surrounding circles with 5, 10, 15, 20, 25, and 30 grid cell radii, respectively. The 1500 LST air temperature from clear sky conditions with zero cloud amount was regressed to the 1100-1500 LST solar irradiance at 9 locations. We found the highest coefficient of determination ($r^2$ = 0.544) at 25 grid cell radius and the temperature variation in this study was explained by Y = 0.8309X + 0.0438, where Y is 1500 LST temperature (in $^{\circ}C$) and X is 1100-1500 LST accumulated solar irradiance (in $MJ/m^2$).