• Title/Summary/Keyword: 100m반경

Search Result 83, Processing Time 0.024 seconds

Carbon strain sensor using Nd: YAG laser Direct Writing (Nd:YAG Laser 직접 각인을 이용한 Carbon 스트레인 센서)

  • Joo, Donghyun;Yoon, Sangwoo;Kim, Joohan;Park, Woo-Tae
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.25 no.1
    • /
    • pp.35-40
    • /
    • 2018
  • Nd:YAG laser was used to carbonize polyimide films to produce carbon films. This is a simple manufacturing process to fabricate low cost sensors. By applying this method, we studied characteristics of flexible and low-cost piezoresistive. Previously, many studies focused on carbonization of polyimide using $CO_2$ laser with wavelength of $10.6{\mu}m$. In this paper, carbonization (carbonization process) was performed on polyimide films using an Nd:YAG laser with a wavelength of $1.064{\mu}m$. In order to increase the resolution, we optimized the laser conditions of the power density ($W/cm^2$) and the beam scan rate. In previous studies using $CO_2$ laser, the minimum line width was $140{\sim}220{\mu}m$ but in this study, carbon line width was reduced to $35{\sim}40{\mu}m$. The initial sheet resistance of the carbon sensor was $100{\sim}300{\Omega}/{\square}$. The resistance decreased by 30% under stretched with a curvature radius of 21 R. The calculated gauge factor was 56.6. This work offers a simple, highly flexible, and low-cost process to fabricate piezoresistive sensors.

The Analysis of Relationships between Road Alignment and Terrain Conditions for National Forest Road (국유림도(國有林道)의 노선선형(路線線形)과 지형(地形)과의 관계분석(關係分析))

  • Cha, Du Song;Cho, Koo Hyun
    • Journal of Korean Society of Forest Science
    • /
    • v.84 no.4
    • /
    • pp.517-524
    • /
    • 1995
  • This study was conducted to investigate the characteristics of the road alignment, correlations among evaluation factors of the alingment, and the relationships between the evaluation factors and terrain factors for the forest road of five National Forest Offices. The results were as follows : 1. The elongation coefficients(${\eta}$) of forest road in Kangnung and Wonju National Forest Office were ranged 0.3~0.5, and those of Andong, Namwon, and Kongju National Forest Offices were ranged 0.2~0.3 in straight line of 100m, 200m, and 300m. 2. Three different types of plane alignment were identified for Kangnung and Wonju National Forest Offices, Namwon and Kongju National Forest Offices, Andong National Forest Office. However, longitudinal alignment for five National Forest Offices tended to be similar conditions. 3. Low correlation coefficients were calculated in the relation between elongation coefficients(${\eta}$) and evaluation factors of plane alignment(curve length ratio(%), sum of inverse number of each curve radius(m/km), and sum of each intersection angle($^{\circ}/km$)) for three straight lines. On the contrary, high correlation coefficients were obtained among the relations of curve length ratio(%), sum of inverse number of each curve radius(m/km), and sum of each intersection angle($^{\circ}/km$). 4. Slope(%) were closely correlated with plane alignment, and so were the relationships between frequency of valleys and streams(No./km) and elongation coefficients(${\eta}$) of forest road.

  • PDF

Analysis of 6-Beam Accelerometer Using (111) Silicon Wafer by Finite Element Method ((111) 실리콘 웨이퍼를 이용한 6빔 가속도센서의 유한요소법 해석)

  • Sim, Jun-Hwan;Kim, Dong-Kwon;Seo, Chang-Taeg;Yu, In-Sik;Lee, Jong-Hyun
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.5
    • /
    • pp.346-355
    • /
    • 1997
  • In this paper, the analyses of the stress disturibution and frequency characteristics of silicon microstructures for an accelerometer were performed using the general purpose finite element simulation program, ANSYS. From the analyses, we determined the parameter values of a new 6-beam piezoresistive accelerometer applicable to the accelerometer's specification in airbag system of automobile. Then, the mass paddle radius, beam length, beam width, and beam thickness of the designed accelerometer were$500{\mu}m$, $350{\mu}m$, $100{\mu}m$, and $5{\mu}m$, respectively and two different seismic masses with 0.4 mg and 0.8 mg were defined on the same sensor structure. The designed 6- beam accelerometers were fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon substrates and the characteristics of the fabricated accelerometers were investigated. Then, we used a micromachining technique using porous silicon etching method for the formation of the micromechanical structure of the accelerometer.

  • PDF

Comparison of Forest Growing Stock Estimates by Distance-Weighting and Stratification in k-Nearest Neighbor Technique (거리 가중치와 층화를 이용한 최근린기반 임목축적 추정치의 정확도 비교)

  • Yim, Jong Su;Yoo, Byung Oh;Shin, Man Yong
    • Journal of Korean Society of Forest Science
    • /
    • v.101 no.3
    • /
    • pp.374-380
    • /
    • 2012
  • The k-Nearest Neighbor (kNN) technique is popularly applied to assess forest resources at the county level and to provide its spatial information by combining large area forest inventory data and remote sensing data. In this study, two approaches such as distance-weighting and stratification of training dataset, were compared to improve kNN-based forest growing stock estimates. When compared with five distance weights (0 to 2 by 0.5), the accuracy of kNN-based estimates was very similar ranged ${\pm}0.6m^3/ha$ in mean deviation. The training dataset were stratified by horizontal reference area (HRA) and forest cover type, which were applied by separately and combined. Even though the accuracy of estimates by combining forest cover type and HRA- 100 km was slightly improved, that by forest cover type was more efficient with sufficient number of training data. The mean of forest growing stock based kNN with HRA-100 and stratification by forest cover type when k=7 were somewhat underestimated ($5m^3/ha$) compared to statistical yearbook of forestry at 2011.

A Study on the Analytic Unit of Habitat Suitability Assessment and Selection in Conservation Areas for Leopard Cat(Prionailurus bengalensis) - Focus on Chungcheong Province Area - (삵의 서식지 적합성 평가를 위한 분석단위 설정 및 보전지역 선정 - 충청도 지역을 중심으로 -)

  • Lee, Dong-Kun;Song, Won-Kyong
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.36 no.5
    • /
    • pp.64-72
    • /
    • 2008
  • The purpose of this study is to compare a habitat suitability grid unit included within a radius of 100m and $1km^2,\;2km^2,\;4km^2$ watershed units in order to predict suitable habitats for Chungcheong province's endangered leopard species(Prionailurus bengalensis). Other developed countries have carried out habitat assessment and established management policies for species conservation using such methods as HEP(Habitat Evaluation Procedures), HSI(Habitat Suitability Index) and GAP(Gap Analysis Program), etc. In accordance with these studies, many evaluation methods for habitat conservation have been proposed in Korea, but these studies are lacking in consideration of analytic units and general application of analysis results. This study predicted leopard habitat using a logistic regression analysis according to analytic units by data from 56 location and 8 sources of environmental data, including elevation, slope, forest area, land cover, roads, water, broadleaf trees, and human habitation. Moreover, the habitat suitability assessment unit was confirmed by a model comparison process encompassing model explanation. verification, and application on a regional scale. Results showed that assessment methods that took into consideration areas in and around the location points were beneficial in predicting habitat and that the assessment unit was appropriate for a 30m grid unit including areas within a radius of 100m and a $1km^2$ watershed unit in Chungcheong Province. This study suggests a method for regional habitat conservation to complement existing conservation area selection methods, and the results are expected to be used in conservation area selection and ecosystem management policies for endangered species.

Study of crystal structure of La-modified $SrTiO_3$ artificial oxide Suprerlattice (La-modified $SrTiO_3$ 산화물 인공격자의 결정구조 분석)

  • 윤경선;이재찬;이광렬
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.11a
    • /
    • pp.162-162
    • /
    • 2003
  • 최근에 산화물 인공격자의 우수한 특성으로 인하여 활발한 연구가 진행되고 있다. 본 연구에서는 펄스레이저 증착방법을 이용하여 산소분압 100mTorr, $650^{\circ}C$에서 LSCO/MgO 기판위에 La-50mol% 첨가된 SrTiO$_3$ (SLTO)와 SrTiO$_3$ 를 적층시켜 산화물 인공격자를 만들어 결정구조에 대하여 연구하였다. SrTiO$_3$ (STO)는 상온에서 3.904$\AA$인 cubic perovskite 구조를 가지고 있다. 일반적으로 La$^{3+}$ (1.14$\AA$)은 Sr$^{2+}$(1.12$\AA$)과 이온반경이 거의 유사하기 때문에 ABO 페로브스카이트 구조의 A자리에 치환될 것으로 기대되며 또한 Sr$^{2+}$ 자리에 La$^{3+}$ 가 치환되므로써 발생하는 charge compensation은 Sr 자리에 Vacancy 생성으로 판단된다. 인공격자의 성장확인을 위하여 SLTO와 STO를 10층씩 증착하여 XRD분석을 통하여 평가하여 보았다. 확인된 결과를 바탕으로 산화물 인공격자의 적층 주기를 SLTO layer를 한층으로 고정시키고 STO를 한 층에서 다섯 층까지 다양하게 변화시켰다. 본 연구의 목적은 산화물 인공격자에서 결정결함을 제어하여 소자에 응용할 수 있는 전기적 물성을 평가하기 위함이다. X-ray diffraction 결과 SLTO/STO 인공격자는 (001) 방향으로 우선배향하였으며 적층주기에 따라 격자상수의 변화를 보였다. AES의 depth profile 분석을 통하여 La의 분포를 확인하였으며, HRTEM 분석을 통하여 미세구조분석을 실시하였다.

  • PDF

A Study on the Analysis of Safe Driving Behavior on Curve Section by Curve Radius and Road Surface Condition (곡선반경과 노면상태에 따른 곡선구간 안전주행 행태분석)

  • Kim, Keun-Hyuk;Lim, Joon-Bum;Lee, Soo-Beom;Kim, Joo-Hee;Kim, Sun-Mi
    • Journal of the Korean Society of Safety
    • /
    • v.27 no.5
    • /
    • pp.211-218
    • /
    • 2012
  • Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

Qualitative Assessment of the Relationship between Site Characteristics and Water Level Fluctuations at the Groundwater Monitoring Wells (지하수 관측망의 현장 특성과 수위 변동의 관계에 대한 정성적 평가)

  • Hwang, Chan-Ik;Park, Hwang-Sung;Kim, Gyoo-Bum
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.288-288
    • /
    • 2020
  • 우리나라의 1시간 간격으로 측정되고 있는 지하수 관측망의 지하수위의 변동성은 강우, 양수, 하천, 지표피복에 의한 영향 등 다양하게 나타날 수 있다. 현재 한국수자원공사 및 한국농어촌공사에서 운영중인 지하수 관측망 중에서 지하수위의 변동 양상이 일반적(계절변동, 강우반응 변동 등)이지 않은 것으로 파악되는 101개소(국가지하수관측망 62개, 4대강보 주변 관측망 5개, 해수침투 관측망 15개, 농촌지하수관리관측망 19개)를 대상으로 현장조사를 실시하고 관측정 주변의 특성과 지하수위 변화와의 관계를 정성적으로 분류하여 보았다. 현장 조사는 지하수 관측정 주변 반경 100 m를 대상으로 하였으며, 기존 우물의 존재 및 규모, 지표 피복 상태, 인근 하천과의 관계(표고차, 하천의 규모, 보의 존재 등), 지형적 이상 특성, 저수지 분포 등을 조사하였다. 조사 대상 지하수 관측정 중에서 주변의 인위적인 요인(양수 영향, 하천수위 조절 영향, 지표 피복 변화, 저수지 수위 조절 등)에 의한 변동으로 확인된 것은 총 89개에 해당한다. 이와 같은 지하수위의 이상 데이터는 지하수 모델링, 함양량 산정과 같은 추가적인 분석에 오류를 발생할 수 있으므로 인공신경망 또는 통계 기법을 활용하여 보정하는 과정이 필요해 보인다.

  • PDF

Inhibition Characteristics of Chlorsulfuron and Imazaquin on Acetolactate Synthase Activity of Corn Plants (Chlorsulfuron 및 Imazaquin에 의한 옥수수 Acetolactate Synthase 활성의 저해특성)

  • Hwang, I.T.;Kim, K.J.;Lee, H.J.;Cho, K.Y.;Chun, J.C.
    • Korean Journal of Weed Science
    • /
    • v.16 no.2
    • /
    • pp.122-131
    • /
    • 1996
  • The inhibition characteristics of chlorsulfuron [CHL, 2-chloro-N-[{ (4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino}carbonyl]benzenesulfonamide] and imazaquin [IMA, 2-{4,5-dihydro-4-methyl-4-(1-methy-lethyl)-5-oxo-1H-imidazol-2-yl}-3-quinolinecarboxylic acid] on acetolactate synthase(ALS) activity of corn plants were investigated. CHL and IMA rapidly inhibited ALS activity of corn plants in vitro. Their $I_{50}$ values for ALS activity were 100nM and $5{\mu}M$, respectively, indicating that CHL had 50 times more inhibitory effect on ALS activity than IMA. The first applied herbicide had a dominant inhibitory effect on ALS activity when the two herbicides were applied sequentially. Branched-chain amino acids, valine(Val), leucine(Leu), and isoleucine(Ile) showed a feedback inhibition on ALS activity ; Val or Leu had a more inhibitory effect on ALS activity than Ile. Branchedchain amino acids and CHL or IMA exhibited an additive effect on inhibiting ALS activity. This suggests that branched-chain amino acids inhibit ALS activity by a different mechanisms) from that of CHL or IMA. Apparent ALS activity, which was measured on the basis of the conversion of pyruvate to acetolactate, was decreased by the addition of 2-ketobutyrate into the ALS reaction mixture in a concentration-dependent manner. In addition, kinetic studies revealed that CHL acts as a noncompetitive inhibitor, while IMA acts as an uncompetitive inhibitor to ALS with respect to pyruvate.

  • PDF

High Resolution Gyeonggi-do Agrometeorology Information Analysis System based on the Observational Data using Local Analysis and Prediction System (LAPS) (LAPS와 관측자료를 이용한 고해상도 경기도 농업기상정보 분석시스템)

  • Chun, Ji-Min;Kim, Kyu-Rang;Lee, Seon-Yong;Kang, Wee-Soo;Park, Jong-Sun;Yi, Chae-Yon;Choi, Young-Jean;Park, Eun-Woo;Hong, Sun-Sung
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.14 no.2
    • /
    • pp.53-62
    • /
    • 2012
  • Demand for high resolution weather data grows in the agriculture and forestry fields. Local Analysis and Prediction System (LAPS) can be used to analyze the local weather at high spatial and temporal resolution, utilizing the data from various sources including numerical weather prediction models, wind or temperature profilers, Automated Weather Station (AWS) networks, radars, and satellites. LAPS has been set to analyze weather elements such as air temperature, relative humidity, wind speed, and wind direction every hour at the spatial resolution of $100m{\times}100m$ for Gyeonggi-do on near real-time basis. The AWS data were revised by adding the agricultural field AWS data (33 stations) in addition to the KMA data. The analysis periods were from 1 to 31 August 2009 and from 15 to 21 February 2010. The comparison of the LAPS output showed the smaller errors when using the agricultural AWS observation data together with the KMA data as its input data than using only either the agricultural or KMA AWS data. The accuracy of the current system needs improvement by further optimization of analyzing options of the system. However, the system is highly applicable to various fields in agriculture and forestry because it can provide site specific data with reasonable time intervals.