• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.731-733
• /
• 1987

• Journal of Periodontal and Implant Science
• /
• v.41 no.5
• /
• pp.234-241
• /
• 2011

Purpose: One of the most frequent complications related to dental implants is peri-implantitis, and the characteristics of implant surfaces are closely related to the progression and resolution of inflammation. Therefore, a technical modality that can effectively detoxify the implant surface without modification to the surface is needed. The purpose of this study was to evaluate the effect of erbium-doped: yttrium, aluminium and garnet (Er:YAG) laser irradiation on the microstructural changes in double acid-etched implant surfaces according to the laser energy and the application duration. Methods: The implant surface was irradiated using an Er:YAG laser with different application energy levels (100 mJ/pulse, 140 mJ/pulse, and 180 mJ/pulse) and time periods (1 minute, 1.5 minutes, and 2 minutes). We then examined the change in surface roughness value and microstructure. Results: In a scanning electron microscopy evaluation, the double acid-etched implant surface was not altered by Er:YAG laser irradiation under the condition of 100 mJ/pulse at 10 Hz for any of the irradiation times. However, we investigated the reduced sharpness of the specific ridge microstructure that resulted under the 140 mJ/pulse and 180 mJ/pulse conditions. The reduction in sharpness became more severe as laser energy and application duration increased. In the roughness measurement, the double acid-etched implants showed a low roughness value on the valley area before the laser irradiation. Under all experimental conditions, Er:YAG laser irradiation led to a minor decrease in surface roughness, which was not statistically significant. Conclusions: The recommended application settings for Er:YAG laser irradiation on double acid-etched implant surface is less than a 100 mJ/pulse at 10 Hz, and for less than two minutes in order to detoxify the implant surface without causing surface modification.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.829-830
• /
• 2009

• Clean Technology
• /
• v.17 no.2
• /
• pp.97-102
• /
• 2011

The adsorption characteristics of amatanth dye by granular activated carbon were experimently investigated in the batch adsorption. Kinetic studies of adsorption of amaranth dye were carried out at 298, 308 and 318 K, using aqueous solutions with 100, 200 and 300 mg/L initial concentration of amatanth. It was established that the adsorption equilibrium of amaranth dye on granular activated carbon was successfully fitted by Langmuir isotherm equation at 298 K. The pseudo first order and pseudo second order models were used to evaluate the kinetic data and the pseudo second order kinetic model was the best with good correlation. Values of the rate constant ($k_2$) have been calculated as 0.1076, 0.0531, and 0.0309 g/mg h at 100, 200 and 300 mg/L initial concentration of amatanth, respectively. Thermodynamic parameter such as activation energy, standard enthalpy, standard entropy and standard free energy were evaluated. The estimated values for standard free energy were -5.08 - -8.10 kJ/mol over activated carbon at 200 mg/L, indicated toward a spontaneous process. The positive value for enthalpy, 38.89 kJ/mol indicates that adsorption interaction of amatanth dye on activated carbon is an endothermic process.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.73-78
• /
• 2010

Recently, many researches on the development of super-hydrophobic surface have been concentrated on the fabrication of nano-patterned products. Nano-patterned mold is a key to replicate nano-patterned products by mass production process such as injection molding and UV molding. The present paper proposes the new fabricating method of nano-patterned mold at low cost. The nano-patterned mold was fabricated by electroforming the anodic aluminum oxide membrane filled with UV curable resin in nano-hole by capillary phenomenon. As a result, the final mold with nano-patterns which have the holes with the diameter of 100~200 nm was fabricated. Furthermore, the UV-molded products with clear nano- patterns which have the pillars with the diameter of 100~200nm were achieved.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.452-454
• /
• 2001

This paper described the calculation results of lightning flashover rate on the 345kV and 154kV transmission system of KEPCO. The back-flashover rate and shielding failure rate was calculated by FLASH(lightning flashover rate calculation program from IEEE) and KEPRI's own program which is based on the EGM(Electro Geometrical Model) method. The estimated lightning flashover late of 345kV transmission system of double circuit was 1.0 flash per 100km-year, and the lightning flashover rate of 154kV transmission line was 2.0 flash Per 100km-year approximately.

• Nutritional Sciences
• /
• v.7 no.4
• /
• pp.241-246
• /
• 2004

This study investigated the influence of weight perception on weight management strategies including diet and exercise in Korean female adolescents. Junior (J) and senior (S) high school girls were divided in two groups; those who had $\leq$100% (BI) and > 100% (AI) of ideal weight (J-BI, n=376, 14.8 yr, 46.1 kg; J-AI, 11=128, 15.0 yr, 57.4 kg; S-BI, n=325, 17.4 yr, 50.1 kg; and S-AI, n=133, 17.5 yr, 58.2 kg, mean values). Questionnaires to assess weight perception, desire to lose weight, body image, eating behavior, weight control strategies and physical activity (PPA) were administered J-AI(9.4 kg) and S-AI(9.8 kg) desired to lose weight more than J-BI(2.5 kg) and S-BI(3.6 kg), respectively (p < 0.001). 85% of J-AI and 93% of S-AI perceived their weight being above average and 23% of J-BI and 34% of S-BI responded similarly (p < 0.001). Body dissatisfaction index (BDI) and eating attitude (EAT26) scores were lower in J-BI(9.7, 12.0) vs. J-AI(16.4, 14.7) and S-BI(12.4, 12.4) vs. S-AI(19.5, 15.4) (p < 0.001). However, PPA was not different for J-BI vs. J-AI, and S-BI vs. S-AL Only 17, 18, 9, and 15% of J.BI, J.AI, S-BI, and S-AI, respectively, exercised regularly. PPA and BDI were only slightly correlated in J-BI(r=0.194, p < 0.005) and S-BI(r=0.220, p < 0.005). Even that the majority of Korean female adolescents perceived they were heavy and desired to lose weight, appropriate exercise and physical activities were not practiced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.410-413
• /
• 2003

We have developed the measurement system for the high power laser The absorber is made of gold-plated copper cavity. The calibration heater is using a manganin(CuMn12Ni ; Isabellenhutte) coil, and output power is measured by using of resistance bridge with composed manganin and copper coil. Developed system can measure for 5∼1000w laser output power range. Calibration factors are 489.13 J/mV at 100W range and 489.13 J/mV at 500W range. Correction factors are 0.99 at 100W range and 1.006 at 500W range.

• The Plant Pathology Journal
• /
• v.19 no.3
• /
• pp.177-180
• /
• 2003

Pasteuria penetrans KW1 (PP), parasitic bacterium of nematode, was isolated from oriental melon greenhouse soil in Korea and evaluated for the suppression effect on the reproduction of southern root-knot nematode, Meloidogyne incognita (MI), in lettuce (Lactuca sativa L. var. Chungchima) and oriental melon (Cucumis melo L. var. Eunchun). Pot experiments were conducted by planting the lettuce seedlings in medium inoculated with 5,000 MI juveniles/pot (J), J +100,000 PP endospores/l g medium, and J +200,000 PP endospores/1 g medium. After 11 weeks of plantation, number of root galls in J +200,000 PP endospores/1 g medium was decreased to 92/root (38.9%, control effect), compared to the J of 150/root. In the second plantation of lettuce in the same pots, the numbers of root gall were significantly decreased in PP treated pots with 75 (77.2%, control effect) and 150/root (54.4%, control effect) in J +200,000 and J +100,000 PP endospores/1 g medium, respectively, compared to the J of 330/root when harvested at 10 weeks after planting. In oriental melon, root gall percentages were 32.1 (60.2%, control effect) and 52.9％ (34.5%, control effect) in J +200,000 and J + 1(10,000 endospores/l g medium which were significantly lower than that of 80.7％ in J.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.06a
• /
• pp.172-173
• /
• 2002