• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.335-343
• /
• 2012

Objectives : The aim of this investigation was to evaluate the remineralization effect of Bamboo salt and NaF+Bamboo salt solutions on bovine enamel formed incipient artificial enamel caries by microcomputed tomography (micro CT). Methods : Experimental solutions were distilled water(negative control), 2% sodium fluoride solution (2% NaF group), 3% bamboo salt solution (3% BS group) and the solution mixed 2% sodium fluoride solution and 3% bamboo salt solution (2% NaF+3% BS group). Specimens were prepared from extracted bovine teeth and divided into 4 groups of 10 specimens each by randomized blocks according to density. Then the specimens surface were divided equally into three parts to observe sound enamel area, incipient enamel carious area and remineralized enamel area. Only one-third of specimen surface was coated with nail varnish and these were exposed to a lactate carbopol buffer system for 72 hours. Then one-half of the demineralized enamel area was coated with nail varnish. The specimens were carried out under pH cycling model for 14 days as follows; samples were immersed in each experimental solution for 2 mins 3 times per day, demineralized for 4 hours and in mixed saliva for the remaining hours. After pH cycling, density was measured using micro CT. Results : All experimental groups showed remineralization effects except for negative control group(p<0.05). The differences of density after experimental solution treatment were statistically significant difference among 4 groups (p<0.01). The density difference values of groups were $0.04{\pm}0.01$ in negative control group, $0.19{\pm}0.01$ in 2% NaF group, $0.14{\pm}0.01$ in 3% BS group, and $0.21{\pm}0.01$ in 2% NaF+3% BS group. Conclusions : The bamboo salt solution showed remineralization effects on incipient artificial enamel caries and the solution mixed sodium fluoride solution and bamboo salt solution showed more remineralization effects than the bamboo salt solution. Thus, it is suggested that bamboo salt can be used as remineralization agent in incipient enamel caries lesion.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.173-180
• /
• 1994

The present experirnents on cryopreservation were carried out to investigate effect of solution toxicity, equilibration time and cell stages on the post-thaw survival of mouse morulae and blastocyst embryos cryopreserved by vitrification in EFS solution. The mouse embryos were exposed to the EFS solution in one step at room temperature, kept in the EFS solution during different period for toxicity test, vitrified in liquid nitrogen and thawed rapidly. After the mouse morulae embryos were exposed to EFS solution for 2 and 5 ruin. at room temperature and then they were washed in 0.5 M sucrose solution and basal mediurn(D-PBS + 10% FCS), they were cultured to examined cryoprotectant toxicity induced injury during exposure, most of embryos developed to expanded blastocysts(100 and 90.0%). However, when the exposure time was extended to 10 and 20 min, these development rates dropped dramatically in 10 ruin. (75.0%) and 20 ruin. (4.5%), respectively. When the compacted morulae were vitrified in EFS solution after equilibration for 2 and 5 min, the embryos have developed to normal blastocyst following thawing, washing and culture processes was 89.3 and 89.6%. However, when the exposure time was expanded to 10 ruin, this survival rate dropped to 68.8%. When the blastocyst were vitrified in EFS solution after equilibration for 2, 5 and 10 minutes, the survival rate of embryos which developed to normal blastocyst following thawing and culture processing were 58.5, 46.7 and 22.4%, respectively. The optimal time of equilibration of mouse morula and blastocysts in EFS solution seemed o be 2 and 5 ruin.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1391-1398
• /
• 1992

The hypothesis tested is that shifts in pH, induced when a cardioplegic solution is oxygenated, can be detrimental. The object of this study is to evaluate the effect of the pH of the oxygenating cardioplegic solution on postischemic recovery in the isolated rat heart. Either 100% oxygen or 95% oxygen: 5% carbon dioxide was added to the cardioplegic solution[St. Thomas` Hospital No. 2] and determined postischemic recovery of isolated rat hearts after 2 hours and 3 hours of 20oC cardioplegic protected ischemia. Heart were arrested and reinfused every 30 minutes throughout the ischemic period with cardioplegic solution. When 100% oxygen was added, the pH of the cardioplegic solution increased from 7.8[no oxygen] to 8.5[100% oxygen] without any change in postischemic functional recovery. But when 95% oxygen ; 5% carbon dioxide was added, the pH of the cardioplegic solution reversely decreased to 6.84 in the 2-hour ischemic group and 6.73 in the 3-hour ischemic group, associated with improved postischemic functional recovery. After 2-hour ischemia, systolic pressure improved from 88.2$\pm$3.7%[no oxygen] and 88.7$\pm$3.8%[100% oxygen] to 96.6$\pm$1.8%[95% oxygen : 5% carbon dioxide], p<0.05, aortic flow from 43.3$\pm$3.1% and 38.4$\pm$10.6% to 74.5$\pm$5.0%, p<0.001, cardiac output from 55.5$\pm$4.6% and 47.4%$\pm$10.6% to 73.1$\pm$4.6%, p<0.05, stroke volume from 62.7$\pm$4.6% and 52.0$\pm$10.1% to 77.2$\pm$4.6%, p<0.05, and dP/dT from 59.3$\pm$7.2% and 56.7$\pm$7.6% to 78.9$\pm$4.6%, p<0.05. The infused amount of the cardioplegic solution during 2-hour ischemic period was similar in three groups. After 3-hour ischemia, cardiac output improved from 17.0$\pm$3.8%[no oxygen] to 45.9$\pm$7.5%[95% oxygen: 5% carbon dioxide], p<0.05, and stroke volume from 21.0$\pm$3.9%[no oxygen] to 50.1$\pm$6.6%[95% oxygen: 5% carbon dioxide], p<0.01. In conclusion, the St. Thomas` Hospital No. 2 cardioplegic solution should be oxygenated but with 95% oxygen: 5% carbon dioxide and not 100% oxygen because of the additive effect of a relatively "Acidotic" pH.t; pH.

• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.118-124
• /
• 1985

The thickness ranges and conditions to form the supersaturated solid solution in Al-Cr alloys were investigated with various rapid solidification conditions. Al-Cr alloys, rapidly solidified by using the small droplet chill quenching method, were examined by means of micro-vickers hardness, lattice parameter, thermal analysis and microscopic observation. The results obtained were as follows; 1. With the increase of solidification rate, the solidified structures were changed to intermetallic compound + solid solution, incompletely supersaturated solid solution, completely supersaturated solid solution, in turn. 2. The minimum solidification rate required to form completely supersaturated solid solution was $2.5{\times}10^{-2}cm/sec$, $3.6{\times}10^{-2}cm/sec$ and $6.0{\times}10^{-2}cm/sec$ for Al-1.0wt%Cr, Al-1,2wt%Cr and Al-1.5wt%Cr, respectively. 3. The maximum distance from the chill surface required to form completely supersaturated solid solution was 5mm, 1.3mm and 0.3mm for Al-1.0wt%Cr, Al-1.2wt%Cr and Al-1.5wt% Cr, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.417-422
• /
• 1999

Algin and chitosan are known as biodegradable natural polymers. PVA is useful for the production of water soluble packaging, paper, textile sizes. PVA/Algin and PVA/chitosan films were prepared by solution blends method in the weight ratio of chitosan, algin for the purpose of useful biodegradable films. Thermal and mechanical properties of blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan films were similar to PVA at thermal and mechanical properties. PVA/Algin films were found that phase separation was occured as more than 25wt% increasing the blend ratio of algin. PVA/Algin films were observed to be less partially compatibility than 10wt% increasing the blend ratio of algin by DSC, mechanical properties and SEM. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, they were rapidly degraded in the enzyme( glucosidase) solution better than pH solution by enzymolysis.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.11-17
• /
• 2015

In acid hydrolysis process of biomass saccharification. neutralization of acid hydrolyzate is essential step, which resulted in dissolved cations in glucose solution. Impact of cations to Kluyveromyces marxianus in glucose solution was investigated focused on ethanol fermentation. Either potassium or sodium cations decreased the ethanol fermentation and glucose to ethanol conversion. Glucose consumption by K. marxianus was delayed by increasing potassium cation concentration as completely consumed within 12 h in potassium cation 0.46 mol and 0.92 mol but within 24 h in potassium cation 1.38 mol. Also, ethanol fermentation process was slowed down with increasing concentration of the potassium sulfate. Fermentation of glucose solution to ethanol was more inhibited by sodium cation than potassium cation in glucose solution. Glucose was completely consumed within 24 h in sodium cation 0.95 mol. but at 1.90 mol or 2.84 mol in sodium cation could not finish the fermentation within 48 hour. Ethanol concentration was 22.26 g/L at low sodium cation in glucose solution with complete fermentation within 24 h. With increasing sodium cation in glucose solution, final ethanol concentration was reached at 14.10 g/L (sodium cation con) and 0.21 g/L (sodium cation con), which meant delaying of fermentation by sodium cations.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.855-859
• /
• 2000

An application of synergistic solvent extraction for the etermination of trace lithium in sea water has been studied by forming an adduct complex of thenoyltrifluoroacetone (TTA) and trioctylphosphine oxide (TOPO) in a solvent. The interference by major constituents in sea water was eliminated by phosphate precipitation. Ex-perimental conditions such as solution pH, concentrations of TTA and TOPO etc. were optimized in synthetic sea water with similar compositionto its natural counterpart. To eliminate the interference, 1.38g of ammoni-um dihydrogen phosphate and 2.5 mL of ammonia water were added into 100 mL of thediluted solution at $60^{\circ}C$ to form the phosphate precipitates of Ca2+ and Mg2+ ions. After the pH of this filtrate was adjusted to 8.0, 10.0 mL of m-xylene containing 0.1 M TTA and 0.05 M TOPO was added to the solution in a separatory funnel, and the solution was shaken vigorously for 20 minutes. The solvent was separated from the aqueous solution, and 20 uL of m-xylene solution was injected into a gaphite tube to measure the absorbance by GF-AAS. The detection limit was 0.42 ng/mL. Lithium was determined within the range of 146 to 221 ng/mLin Korean coast-al sea waters, and the recoveries in the spiked samples were 94 to 106%.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1196-1201
• /
• 1997

As a basic study to develop low-salted fermented anchovy, rates of salt penetration into anchovy muscle, patterns of protein degradation and changes in water activity and transfer was analyzed after brining at various salt (NaCl) concentration. The salt penetration curves followed first order. kinetics. The rate constant (k) increased from 0.018 (10% NaCl solution) to 0.051 (saturated). Water activity was reduced from 0.93 (10% NaCl solution) to 0.77 (saturated). Protein degradation during brining was Somewhat occurred in 10% NaCl solution but not in satutrated solution. Water content of anchovy muscle were 74% (w/w), 65% and 58% when 10%, 20% and saturated NaCl solution were used, respectively. This result indicated that as NaCl content of brining solution was increased, the amount of water transfer also occurred. Weight of anchovy increased at 10% NaCl solution and decreased at 20% and saturated NaCl solution. The loss of anchovy solid mash during brining was calculated as 30% after 36 hr brining.

• Journal of Chest Surgery
• /
• v.26 no.6
• /
• pp.427-440
• /
• 1993

The paucity of donor hearts for transplantation can be remedied by distant heart procurement. Prolonging donor heart preservation is essential for successful clinical cardiac transplantation. Thirty-two isolated rat hearts were perfused with Krebs-Henseleit buffer solution for 15 minutes, arrested and preserved at 4 oC for 4 hours, and then reperfused for 25 minutes. The following three groups were prepared and hemodynamic changes, creatine kinase-MB isoenzyme levels and ultrastructural changes of the myocardium were analysed before and after cardiac arrest. ; Group I : the heart was arrested with the cardioplegic solution [Plegisol, potassium : 16 mM, sodium : 120 mM] and then stored in a solution with ionic compositions of the extracellular fluid [Hartman, potassium : 4 mM, sodium : 130 mM] ; Group II : the heart was arrested with the cardioplegic solution and stored in a solution with ionic compositions of the intracellular fluid [Modified Euro-Collins, potassium : 108 mM, sodium : 10 mM] ; Group III : the heart was arrested with the cardioplegic solution containing adenosine 20 uM, and then stored in a solution with ionic compositions of the intracellular fluid [Modified University of Wisconsin solution, potassium : 119 mM, sodium: 23 mM]. Left ventricular developed pressure at 20 minutes of the reperfusion was significantly higher in group III [64.3 $\pm$ 3.12 mmHg, p<0.01] and group II [58.3 $\pm$ 1.55 mmHg, p<0.05] as compared with group I [51.4$\pm$ 2.78 mmHg]. The time to induce cardiac arrest after infusion of cardioplegic solution with adenosine 20 uM [5.3 $\pm$ 0.30 second, p<0.005] was significantly shorter than without adenosine [10.6$\pm$ 0.55 second]. Coronary flow at 20 minutes of the reperfusion was augmented significantly in group III [9.6$\pm$ 0.50 ml/min, p<0.05, p<0.05] as compared with group I [8.0 $\pm$ 0.41 ml/min] and group II [8.1$\pm$ 0.51 ml/min]. Percentage recovery of left ventricular developed pressure at 20 minutes of the reperfusion was significantly higher in group III [94.6$\pm$ 2.51 %, p<0.005] as compared with group II and in group II [83.1 $\pm$ 1.22 %, p<0.005] as compared with group I [69.9 $\pm$ 1.73 %], and also percentage recovery of coronary flow at 20 minutes of the reperfusion was significantly higher in group III [82.3 $\pm$ 3.86 %, p<0.05] as compared with group II [71.4 $\pm$ 3.46 %] but there was no significant difference between group I and group II. Measured level of creatine kinase-MB isoenzyme at 15 minutes of the reperfusion was significantly lower in group III [1.23 $\pm$ 0.16 ng/ml, p<0.025] and group II [1.42$\pm$ 0.10 ng/ml, p<0.05] as compared with group I [1.79 0.14 ng/ml]. In the semiquantitative evaluation of the ultrastructural changes of the myocardium, mitochondrial score was lower in group III [0.7 $\pm$ 0.21] than in group I [3.1$\pm$ 0.28] and group II [1.7 $\pm$ 0.19], and also the other structural score was lower in group III [2.7$\pm$ 0.99] than in group I [7.9 $\pm$ 0.89] and group II [5.0 $\pm$ 1.22]. In conclusion, the solution with ionic compositions of the intracellular fluid is appropriate for prolonged cardiac preservation, and it appears to be better preserving method for distant procurement when the donor heart is rapidly arrested with cardioplegic solution containing adenosine 20 uM, and then stored with Modified University of Wisconsin solution.

• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.455-461
• /
• 2007

The electric current of a flow injection type enzyme-sensor was measured to confirm the stable operating conditions of the sensor. The current of the sensor was decreased as the buffer solution velocity increased. Under the limitation of the cycle time to be below 10 minutes, the effective ranges of the buffer solution velocity were suggested $0.10{\sim}0.26$, $0.12{\sim}0.24$, $0.1{\sim}0.25$ and $0.05{\sim}0.10\;cm/s$ of 1.0, 1.4, 2.4 and 3.4 mm of the electrode diameters, respectively. As the reaction time of the enzyme and the substrate was increased, the current was decreased because of the dilution between the sample and buffer solution. Therefore, it could be recommended that the reaction time was able to be selected as shortly as possible in consideration of the total cycle time. As the result of the experiments using a different volume ratio of the enzyme to substrate, it was concluded that the substrate had to be mixed with the same amount of the enzyme. The current have increased remarkably in proportion to the electrode diameter under 0.1 cm/s of the buffer solution velocity but there was no difference over 0.1 cm/s of the buffer solution velocity. The cross type arrangement of the electrode was highly suggested for application and machining of the sensor.