• Proceedings of the Microbiological Society of Korea Conference
• /
• 1998.04a
• /
• pp.49.1-49.1
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.470-473
• /
• 2009

We have developed a novel driving method, Six times Rate Driving(SRD) for the purpose of making cost competitive TFT-LCD. By applying SRD method to an a-Si TFT-LCD, the driving rate was increased six times as it was named but the number of data lines and so its D-Ics were reduced to one sixth of the conventional one which resulted in the cost saving of that much. We also newly designed the gate driver in order to avoid any expansion of the bezel width caused by applying SRD. Our newly developed driving technology, SRD was successfully applied to 7.0-inch WSVGA (1024 ${\times}$ 600) TFT-LCD which can be driven with only one data D-IC and here introduced.

• Journal of the Korean housing association
• /
• v.11 no.2
• /
• pp.129-137
• /
• 2000

This study is about the difference of South and East facing Cooling load of Apartment s Houses using Dynamic Heat-flow Calculation. Therefore, the purpose of this study is come in to use Material for the Thermal Environments of Apartment Houses. The results of the analysis are below. (1) For the peak load of degree hour; The highest is "I" unit and the next high load is H, F, E, C, B, G, D and A unit for the south facing Apartment houses. The higher load is "H" unit and the next high load is I, E, F, B, C, G, D, A Unit for the east facing Apartment houses. (2) For the total load of degree day; The highest load is "I" unit and the next high load is H, G, F, E, C, B, D and A Unit for the south facing Apartment houses. The highest load is "H" unit and the next high load is I, G, E, F, B, C, D, A Unit for the east facing Apartment houses. (3) For the total load of degree day; The highest load is "H" Unit for the east facing Apartment houses and the Lowest load is "A" Unit for the south facing Apartment houses.is "A" Unit for the south facing Apartment houses.nt houses.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.583-590
• /
• 2008

최근 작업자 숙소 및 이송용 외에 작업용으로 사용 가능한 Barge선의 일종인 Accommodation Work Barge 선의 건조량이 증가 추세인 바 현재 중국에서 건조 중인 해당 선박의 HVAC & Refrigeration system에 대하여 정리하였다. 본 시스템은 R404A Direct expansion 냉각방식 (직접팽창방식)이 적용되었으며 HVAC system 중 Air conditioning 부분에 대해서는 선박의 각 Deck 기준으로 Zoning 하여 개별적인 Air handling unit와 Condensing unit를 구성하였으며 (각 unit의 용량은 필요용량의 100%), 냉동 창고의 Refrigeration system은 해당 격실 (육고, 어고, 야채고)에 각각 Unit cooler를 설치하고, Condensing unit를 기계실에 설치하였다. 장비는 전체 용량 100%에 대하여 항시 운전하는 100% 용량의 장비와 비상시에 운전하는 100% 용량의 예비 장비로 구성된다. 냉동 창고에 인접한 Dry provision store는 냉동 창고와는 별개로 중앙 공조기로부터의 냉각 공기를 이용하여 Spot cooling하였다. 본 System의 구성에 대한 장점 및 단점은 아래와 같다. 1. Air conditioning system이 각 Zone에 대하여 구성되므로 각 Zone에 대하여 제어가 가능하다. 2. Air con. 실에 Air handling unit와 Condensing unit가 설치되므로 냉매 배관의 길이가 짧다. 3. Air con. 실에 Air handling unit와 Condensing unit가 설치되므로 실내의 Maintenance space 상에 여유가 없다.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.3
• /
• pp.1-9
• /
• 2019

Population is important as a fundamental element of local industry and economy, and census data is essential to regional planning and policy making. Although there have been many researches on population and regional planning, there are few studies on population considering spatial unit. In this study, the population of three spatial scales were compared in order to establish the spatial unit suitable for the rural planning. The study area is Gangwon, Chungcheong-Nam, Chungcheong-Buk, Jeolla-Nam, Jeolla-Buk, Gyeonsang-Nam, Gyeonsang-Buk and Jeju province. Population were compared using statistical data analysis, GIS visualization, and spatial statistics. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. As the results, the census output area unit is difficult to interpret spatial analysis results. Administrative district unit has the limit that includes areas where the population does not live. The grid unit is well suited to the geographical characteristics but has many disadvantages of the grid with small population. Therefore, It is necessary to complement the limits of the Eup and Myeon-dong administrative district through the grid unit data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.736-742
• /
• 2010

This study was conducted to characterize on the relationships of rainfall intensity and infiltration rate of rainfall dependent on unit weight change in the gneissic weathered soil by a column test equipment. In this study, volumetric water content and pore water pressure were measured using TDR sensors and tensiometers at regular time intervals. Rainfall conditions including continuous rainfall and repeated rainfall were selected in order to know the effect of antecedent rainfall. In the condition of rainfall intensity 20mm/h and the unit weights of soil as $1.35g/cm^3$, $1.55g/cm^3$ and $1.61g/cm^3$, average rainfall infiltration rate was $2.814{\times}10^{-3}cm/sec$, $1.969{\times}10^{-3}cm/sec$ and $1.252{\times}10^{-3}cm/sec$ respectively. The higher rainfall intensity and lower unit weight of soil, the faster average infiltration rate. Overflow in the column was happened except rainfall condition of rainfall intensity 20mm and soil unit weight $1.35g/cm^3$. Increasing the soil unit weight, overflowed water was increased and occurrence time was faster.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.197-199
• /
• 2007

Four banana-shaped compounds have beene synthesized introducing ester linking group into mesogenic unit, varying the central core with 1,6-, 1,7-, 2,3-, and 2,7-naphthylene units, and introducing the dodecyloxy group as the terminal flexible unit. All obtained compounds except one with 1,7-naphthylene unit were reversibly thermotropically liquid crystalline. The compound with 1,7-naphthylene unit could not form the mesophase due to its asymmetrical and sharp substitution angle. The compounds with 1,6- and 2,3-naphthylene units showed an antiferroelectric switchable smectic phase, which has been designated B2 phase. Interestingly, the compound with the 2,3-naphthylene unit showed the two mesophases of B2 and nematic phase.

• Korean Journal of Radiology
• /
• v.21 no.11
• /
• pp.1230-1238
• /
• 2020

Objective: We aimed to assess the effects of remote ischemic pre-conditioning (RIPC) on the incidence of contrast-induced nephropathy (CIN) after an intravenous (IV) or intra-arterial injection of contrast medium (CM) in patient and control groups. Materials and Methods: This prospective, randomized, single-blinded, controlled trial included 26 patients who were hospitalized for the evaluation of the feasibility of transcatheter aortic valve implantation and underwent investigations including contrast-enhanced computed tomography (CT), with Mehran risk scores greater than or equal to six. All the patients underwent four cycles of five minute-blood pressure cuff inflation followed by five minutes of total deflation. In the RIPC group (n = 13), the cuff was inflated to 50 mm Hg above the patient's systolic blood pressure (SBP); in the control group (n = 13), it was inflated to 10 mm Hg below the patient's SBP. The primary endpoint was the occurrence of CIN. Additionally, variation in the serum levels of cystatin C was assessed. Results: One case of CIN was observed in the control group, whereas no cases were detected in the RIPC group (p = 0.48, analysis of 25 patients). Mean creatinine values at the baseline, 24 hours after injection of CM, and 48 hours after injection of CM were 88 ± 32 μmol/L, 91 ± 28 μmol/L and 82 ± 29 μmol/L, respectively (p = 0.73) in the RIPC group, whereas in the control group, they were 100 ± 36 μmol/L, 110 ± 36 μmol/L, and 105 ± 34 μmol/L, respectively (p = 0.78). Cystatin C values (median [Q1, Q3]) at the baseline, 24 hours after injection of CM, and 48 hours after injection of CM were 1.10 [1.08, 1.18] mg/L, 1.17 [0.97, 1.35] mg/L, and 1.12 [0.99, 1.24] mg/L, respectively (p = 0.88) in the RIPC group, whereas they were 1.11 [0.97, 1.28] mg/L, 1.13 [1.08, 1.25] mg/L, and 1.16 [1.03, 1.31] mg/L, respectively (p = 0.93), in the control group. Conclusion: The risk of CIN after an IV injection of CM is very low in patients with Mehran risk score greater than or equal to six and even in the patients who are unable to receive preventive hyperhydration. Hence, the Mehran risk score may not be an appropriate method for the estimation of the risk of CIN after IV CM injection.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.226-233
• /
• 1994

Three hundred and one cellulolytic bacterial were isolated from the 148 screening sources such as decomposed wood, soil, compost and leaf mold. Among them, strain KL-6 was found to have the highest of cellulase activity, and identified as species belonged to the genus Cellulomonas. Strain KL-6 was decompose up to 90% of the filter paper (whatman No. 1) substrate within 50 hours, and showed the colony halo formation (11 cm). The activities of CMCase (67 unit/ml), FPase (70 unit/ml) and ${\beta}-glucosidase$ (0.68 unit/ml) were obtained when this strain was cultured for 50 hrs at $30^{\circ}C$. Glucose was not found in detectable amounts at the FP medium. The optimum composition of nutrient medium for the cell growth by strain KL-6 was sucrose 0.5%, yeast extract 0.1%, $(NH_4)_2HPO_4\;0.1%$, $K_2HPO_4\;0.1%$, $MgSO_4{\cdot}7H_2O\;0.01%$, $CaCl_2\; 0.01%$, NaCl 0.6%, $CaCO_3\;0.1%$ and the optimum pH and temperature were 7.0 and $30^{\circ}C$, respectively.

• Nuclear Engineering and Technology
• /
• v.29 no.5
• /
• pp.375-384
• /
• 1997

Relative power density distributions of the Kori Unit 1 pressurized water reactor are calculated by Monte Carlo modeling with the MCNP code. The Kori Unit 1 core is modeled on a three-dimensional representation of the one-eighth of the reactor in-vessel component with reflective boundaries at 0 and 45 degrees. The axial core model is based on half core symmetry and is divided into four axial segments. Fission reaction density in each rod is calculated by following 100 cycles with 5,000 test neutrons in each cycle after starling with a localized neutron source and ten noncontributing settle cycles. Relative assembly power distributions are calculated from fission reaction densities of rods in assembly. After 100 cycle calculations, the system converges to a k value of 1.00039 $\geq$ 0.00084. Relative assembly power distribution is nearly the same with that of the Kori Unit 1 FSAR. Applicability of the full-scope Monte Carlo simulation in the power distribution calculation is examined by the relative root moan square error of 2.159%.