• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1732-1736
• /
• 2008

The characteristics of a river flow analysis are significant for river maintenance plan. At the present time, HEC-RAS, 1-Dimensional Numerical Analysis Model, is mainly applied to analyze the character of a river flow. The shape of a river is somewhat in longitudinal linear form. It was suspected that the usage of 1-dimensional numerical analysis model is more economical. Development of numerical analysis models and computers are possible to calculate large volume. Hence, it is possible to adapt the analysis of the key stations by 2-dimensional numerical analysis model. The limitation of 1-Dimensional Numerical Analysis Model is that it is hard to evaluate structure affection of numerical simulation by energy loss coefficient at river structure analyzing. When adaptation of the 2-dimensional numerical analysis model in river structure ensues, it takes more objective analyzing than 1-dimensional numerical analysis model for flow affection by river structure. 2-dimensional numerical analysis model consults with the different structure position of hydraulic characteristics and different water depth of shape and scope in vertical flow. 1-dimensional numerical analysis model is possible to simulate with only energy loss coefficient for sudden river section changing, sudden waterway changing by curved. 2-dimensional numerical analysis model use original geographical features. So the model removes technical subjectivity of faulty judgment. It is an objective analysis.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.622-628
• /
• 2001

We developed 1- and 2-dimensional fluid model for the analysis of a capacitively coupled Ar RF(Radio Frequency) glow discharge. This discharge is in pure Ar gas at the pressure 100[mTorr], frequency 13.56[MHz] and voltage amplitude 120[V}. This model is based on the equations of continuity and electron energy conservation coupled with Poison equation. 2-dimensional model is simulated on the condition of GEC(Gaseous Electronic Conference cell). The geometry of the discharge chamber and the electrodes used in the model is cylindrically simmetric; tow cylinders for the electrodes are surrounded by the grounded chamber. It is shown that 1-dimensional model is very useful on the understanding of RF glow discharge property and of the movement of charged particles. 2-dimensional model predicts off-axis maximum structure as in the experiments and has the results in qualitatively and quantitatively good agreement with the experiments. Effects of dc self-bias voltage, guard ring and reactor geometry is discussed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-78
• /
• 2012

Rotary kiln furnace is one of the most widely used reactors in industrial field. In this paper, 0-dimensional heat and mass balance for direct coal flame rotary kiln was performed preferentially, then a simplified 1-dimensional model was developed based on 0-dimensional analysis data to proceed additional thermal analysis. Compared the results with the currently operating rotary kiln data to validate 1-dimensional model. Through this procedure, it can help to derive fundamental idea for design and operation of rotary kiln.

• 대한의용생체공학회:의공학회지
• /
• 제5권1호
• /
• pp.19-24
• /
• 1984

In this study, the general characteristics, and theories of cochlear concerning with hearing are examined. Also the digital method is studied in order to analyze with microcomputer on the model equation of basiliar membrane in the cochlear derived from 3-dimensional rectangular block model which is studied by Boer. The method is illustrated for the amplitude characteristics of basiliar momtrane wave velocity. The results obtained are as follows; 1. In the magnitude characteristics, the velocity gradually increases from the stapes, shows the maximum magnitude, and then rapidly decreases to the Helicotrema. 2. The characteristics of 3-dimensional model is located between 1-and 2- dimensional models in the velocity characteristics coefficients, magnitude characteristics, and the pattern of 2-dimensional model shoves the different features from the 1-dimensional and 3-dimensional rectangular block model. 3. In the 3-dimensional rectangular block model, the characteristics of the waveform and the maximum resonant point are same whether Z(X) is linear or nonlinear.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.25-32
• /
• 1995

Clinically, proximal bone resorption in the femur is frequently seen postoperatively on the follow up XI-rays after total hip replacement (THR). We developed the finite element model of cementless THR. The model is two dimensional side plate model, whereby the three dimensional structural integrity of the bone can be accounted for by a separate two dimensional mesh, a side plate. The subject of this article is the development and application of this two dimensional side plate FEM to study the reverse effect of the various degree of bone resorption of femur after THR. The results of this study indicates that 1) two dimensional side plate model is good and simple alternative to complex three dimensional model and 2) the severity of the proximal bone resorption has the effect of more increasing stress on the cortex at the level of femoral stem tip.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• 산업기술연구
• /
• 제28권B호
• /
• pp.193-198
• /
• 2008

When the existing polder levee was constructed, the river's numerical analysis decided the bank raise by applying the planned flood stage or by using the result from the sectional 1st dimensional numerical analysis. But, it was presented that there is a limitation in the 1st dimensional value analysis when the structure like the polder levee obstructs the special shaped running water flow. Therefore, in order to verify the numerical value applicability when the polder levee is constructed, this report compared each other through the 1st and 2nd dimensional numerical analysis and the mathematical principle model laboratory. In case of the polder levee construction through the numerical analysis and the mathematical principle model laboratory, it was decided that there was no big problem in the 1st dimensional numerical analysis applied design, considering the uncertainty of mathematical principle analysis though the first dimensional numerical analysis was calculated a little bigger than the second. But, after construction, it was found that the water level deviation of the 1st, 2nd occurred biggest at the place where the flow was divided into two. Also, as a result of comparing the 1st, 2nd dimensional numerical analysis with the mathematical principle model laboratory, it was confirmed that the 1st numerical analysis applied design decreased the modal safety largely, as the left side water level was calculated smaller more than 0.5m in case of the 1st dimensional numerical analysis.

• 한국해안해양공학회지
• /
• 제7권2호
• /
• pp.176-197
• /
• 1995

한국경남해역의 2차원 및 3차원적 조류구조를 동적원리에 근거한 수치모형을 통하여 조사하였다. 2차원 수치모형을 이용하여 주 8개 분조(M$_2$, S$_2$, $K_1$, $O_1$, $N_2$, $K_2$, P$_1$, Q$_1$)에 대한 조석체계를 계산하였다. 계산결과는 해안의 관측치와 비교하여 만족할만한 일치를 보였다. 이러한 결과를 토대로 하여 매년 적조등으로 인해 심각한 오염이 발생되고 있는 진해만과 마산만의 3차원적 조석순환구조를 조사하기 위하여 기 수립된 2차원 모형과 내만의 3차원 모형을 연결시키도록 개선하였다. 그 방법으로 Davies(1980)가 제시한 2차원 수심적분 모형과 3차원 Galerkin-Spectral 모형과의 동적연결방법을 이용하였다. Davies의 연구에 추가하여 본 연구에서는 3차원 수치모형에 자승형마찰항과 비선형 이류항을 추가하였다. 3차원 모형에서 산정된 각 수심별 M$_2$ 분조의 조류타원도는 KORDI(1990)가 수행한 수심별 조류관측치와 양호한 일치를 보였다.

• 천문학회지
• /
• 제28권1호
• /
• pp.61-65
• /
• 1995

We discuss a model4-dimensional Friedmann cosmology which may have evolved from a model of 4+D dimensions which admits spontaneous compactification of D dimensions (or N-dimensional variants of the Brans-Dicke (BD) theory). The BD parameter appearing in dimensional reduction is negative $-1<\omega<0$ (for the N-dimensional variants of the BD theory, $-1.5{\leq}{\omega})$. We find that if there had been inflationary transtion to the standard big-bang model, the Universe can undergoe a polar-type expansion during when the gravitational coupling becomes negative. The unique feature is that for the negative w, the density parameter of the post-inflationary Universe falls in a range 0<0<1 even if the Universe is geometrically flat (k = 0).

• 한국수자원학회논문집
• /
• 제34권6호
• /
• pp.687-699
• /
• 2001

침식률 측정장치인 SEDFLYME을 사용하여 직접 측정한 침식률 자료를 이용하는 퇴적물 수송에 관한 2차원 모형이 개발되었다. 개발된 모형은 현장 적용성을 높이기 위하여 경계밀착좌표계를 수평방향에 대해 사용하며, 퇴적물 이동 모의시 침식률 산정에서 불확실성을 줄이기 위해 침식률 측정자료를 직접 사용한다. 개발된 모형은 부유사와 소유사 이동을 모두 고려한다. 모형의 정확성을 검토하기 위하여 1차원 수로에서 장갑화 현상을 모의하고 실험자료와 비교하였다. 비교한 결과에 의하면, 본 모형은 기존의 1차원 모형의 연구결과에 비하여 입도분포 변화과정을 보다 정확히 모의하였다. 또한, 수로폭이 확장하는 2차원 수로에서 퇴적과 침식 현상을 모의한 결과, 모형은 정상적으로 작동하였으며 장갑화 현상이 침식과 퇴적을 억제하는 데 기여하는 것을 확인할 수 있었다.