• Journal of the Korean Chemical Society
• /
• v.38 no.1
• /
• pp.21-25
• /
• 1994

The proton affinities of substituted imidazoles, relevant to the binding of lexitropsins that contain imidazole ring to the base pair (G-C sequence) of minor groove of DNA, are studied with the aid of EHT calculations. It is shown that proton affinity of imidazole substituted at position $\alpha$ to the basic nitrogen is slightly larger than that of imidazole substituted at N for the methylimidazole. Proton affinities of N-substituted imidazoles are found to be larger than those of imidazoles substituted at position ${\alpha}$ for a selected set of the other derivatives. As predicted the proton affinity increases when electron-donating group is attached at position N of imidazole.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.137-143
• /
• 2004

The determination of 2-mercapto-1-methyl-imidazole (MMI) in 5.0${\times}10^{-2}$ M lithium perchlorate suporting electrolyte has been investigated by the differential pulse polarography. The optimum condition of MMI analysis was as follows; -0.9 volts initial potential, 0.08 mV pulse height, 2 mV/sec scan rate, and medium mercury drop size. Standard calibration curve showed a good linearlity in the range of 1.0${\times}10^{-7}M\;to\;8.0{\times}10^{-5}$ M and the detection limit has been (2.2${\pm}0.1){\times}0.1^{-9}$ M. This method was applicated for the determination of MMI in antithyroid drug without interference of additives.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.359-364
• /
• 2006

Reversed-phase high-performance liquid chromatography (HPLC) techniques were developed to quantify abamectin (ABM) in paprika (Capsicum annum). Separation was achieved on a $C_{18}$ ODS column with a mobile phase of acetonitrile/water (96/4, v/v) mixture in an isocratic elution at the flow tate of 1.2 mL/min for avermectins (AVMs). The retention times were 8.0 and 9.7mins for AVM $B_{lb}$ and AVM $B_{1a}$, respectively. Residual AVMs (sum of AVM $B_{1a}$, AVM $B_{1b}$ and 8,9-Z-AVM $B_{1a}$) in the vegetable were extracted with acetonitrile, and the silica solid-phase extraction cartridges were used to purify the extract. AVMs were derivatized using trifluoroacetic acid and 1-methylimidazole, and the derivatives were determined with a fluorescence detector (excitation at 365 nm and emission at 470 nm). High and consistent recoveries, ranging from 93% to 115%, were obtained for AVM $B_{1a}$ and 8, 9-Z-AVM $B_{1a}$ at fortified levels of $20{\mu}g/kg\;and\;200{\mu}g/kg$ for paprika. The limit of quantitation (LOQ) was $2{\mu}g/kg$. The residual levels of AVMs in paprika in a field experiment from one day to seven days after the last application decreased from 18.40 to $7.59{\mu}g/kg$. The half-life $(T_{1/2})$ of AVMs in paprika was 1.47 days.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.4
• /
• pp.372-382
• /
• 2022

In this study, anion exchange membranes were prepared by synthesizing the main chain into a poly(arylene ether) (PAE) structure, and the structures capable of improving the physical and chemical stability of the membrane by introducing a heterocyclic quaternary ammonium functional groups were studied. The chemical structure and thermal properties of the prepared polymer were confirmed by ¹H-NMR, FT-IR, TGA, and DSC, and surface analysis was performed through AFM measurement. Additionally, dimensional stability and chemical properties was studied by measuring water uptake and swelling ratio, IEC and ionic conductivity. At 90℃, the quaternized poly(arylene ether) (QPAE)/1-methylpiperidine (MP) membrane exhibited the highest ionic conductivity of 27.2 mS cm^-1, while the QPAE/1-methylimidazole (MI) membrane and QPAE/1-methylmorpholine (MM) membrane exhibited values of 14.5 mS cm^-1 and 11.5 mS cm^-1, respectively. In addition, the prepared anion exchange membrane exhibited high chemical stability in alkaline solution.

• Advances in nano research
• /
• v.10 no.3
• /
• pp.295-312
• /
• 2021

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.115-121
• /
• 1992

Avermectin B1(abamectin) is an very effective acaricide/insecticide. Because it is applied at low rates, the resultant residue level would be quite low and this requires highly sensitive analytical method. In this study, three analytical methods for avermectin $B1_a$, were compared in view of detectability and sensitivity. The first analytical method was an HPLC method employing the fluorescence detection of avermectin. The second analytical technique to quantitate avermectin $B1_a$, and its photodegradative delta 8,9-isomer employed trifluoroacetic anhydride and 1-methylimidazole in DMF. The new method was the modification of trifluorescence method. The average recoveries of avermectin $B1_a$ for the concentration range from 1 and 10 ng/g in whole apple fruit by fluorescence method were 90.3% and 88.2% respectively. In trifluorescence method, the recoveries of the avermectin $B1_a$ and delta 8,9-isomer were 100.7% and 94.7% in concentration from 5 ng/g and 25 ng/g. The average recoveries of 5 ng and 25 ng/g in the newly modified method were 95.0, 99.0. 96.0, 92.8% in whole apple and soil respectively.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.44-51
• /
• 2020

The basic catalyst 1-benzyl-3-methyl-imidazolium hexafluoroantimonate (BMH) was synthesized and analyzed by FT-IR and ¹H-NMR. A crystalized biphenyl-based epoxy was synthesized by using tetramethyl biphenol (TMBP) and epichlorohdrine. In order to consider the curing tendency of the synthesized BMH, the mass ratio was changed to 0.5, 1.0, 2.0 wt.% under heated conditions and the curing tendency was analyzed by differential scanning calorimeter (DSC). As a result, the BMH catalyst showed a fast curing result in the stepwise heating pr℃ess of the biphenol-A epoxy and the cationic polymer. From these results, the BMH catalyst showed excellent thermal stability as a potential heat curing catalyst. In addition, we considered the application possibility of epoxy molding compound (EMC) which required a skeleton structure and a high heat resistance because the synthesized biphenyl epoxy had a characteristic of rapidly lowering viscosity at a constant temperature and a rigid skeleton structure of biphenol. As a result, it was confirmed that the TMBP-based epoxy developed in this study was composed of a crystalline structure, and a curing reaction was observed with a Novolac resin at a high temperature. In the presence of a catalyst, a curing reaction was observed around 150 ℃ and thus TMBP-based epoxy was successfully applied as a raw material of EMC.