• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.162-168
• /
• 2012

In proton therapy, in vivo dose verification is one of the most important parts to fully utilize characteristics of proton dose distribution concentrating high dose with steep gradient and guarantee the patient safety. Currently, in order to image the proton dose distribution, a prompt gamma distribution detection system, which consists of an array of multiple CsI(Tl) scintillation detectors in the vertical direction, a collimator, and a multi-channel DAQ system is under development. In the present study, the optimal design of prompt gamma distribution detection system was studied by Monte Carlo simulations using the MCNPX code. For effective measurement of high-energy prompt gammas with enough imaging resolution, the dimensions of the CsI(Tl) scintillator was determined to be $6{\times}6{\times}50mm^3$. In order to maximize the detection efficiency for prompt gammas while minimizing the contribution of background gammas generated by neutron captures, the hole size and the length of the collimator were optimized as $6{\times}6mm^2$ and 150 mm, respectively. Finally, the performance of the detection system optimized in the present study was predicted by Monte Carlo simulations for a 150 MeV proton beam. Our result shows that the detection system in the optimal dimensions can effectively measure the 2D prompt gamma distribution and determine the beam range within 1 mm errors for 150 MeV proton beam.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.189-196
• /
• 2012

The heavy moderator acts as the ultimate heat-sink in an operating CANDU reactor. HUKINS has been developed to investigate moderator flow patterns. HUKINS consists of a 38.4-mm-thick cylindrical shell with a 0.95 m inner diameter and 88 sus-tubes that produce a total heat of 10 kW. A chemical visualization method was selected to estimate the occurrence of typical moderator flow patterns. Momentum-dominated flow, mixed flow, and buoyancy-dominated flow are detected under conditions of a heat load of 7.7 kW and input mass flow rates of 4, 7, and 11 L/min. The experimental results are similar to the results of a CFD simulation that consisted of approximately 1.9 million grids and was conducted using the k-${\varepsilon}$ turbulence model. Therefore, both the present experiments and simulations using HUKINS, a 1/8-scale model, represent all three important flow patterns expected in the real CANDU6 reference reactor. Thus, it has been demonstrated that HUKINS could be useful in the study of CANDU6 moderator circulation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.315-315
• /
• 2017

In Japan, more than 80 % of soybean growing area is converted fields and excess water is one of the major problems in soybean production. For example, recent study (Yoshifuji et al., 2016) suggested that in the fields of shallow groundwater level (GWL) (< 1m depth), rising GWL even in a short period (e.g. 1 day) causes inhibition of soybean growth. Thus it becomes more and more important to predict GWL and soil moisture in detail. In addition to conventional surface drainage and underdrain, FOEAS (Farm Oriented Enhancing Aquatic System), which is expected to control GWL in fields adequately, has been developed recently. In this study we attempted to predict GWL and soil moisture condition at the converted field with FOEAS in Biwa lake reclamation area, Shiga prefecture, near the center of the main island of Japan. Two dimensional HYDRUS model (Simuinek et al., 1999) based on common Richards' equation, was used for the calculation of soil water movement. The calculation domain was considered to be 10 and 5 meter in horizontal and vertical direction, respectively, with two layers, i.e. 20cm-thick of plowed layer and underlying subsoil layer. The center of main underdrain (10 cm in diameter) was assumed to be 5 meter from the both ends of the domain and 10-60cm depth from the surface in accordance with the field experiment. The hydraulic parameters of the soil was estimated with the digital soil map in "Soil information web viewer" and Agricultural soil-profile physical properties database, Japan (SolphyJ) (Kato and Nishimura, 2016). Hourly rainfall depth and daily potential evapo-transpiration rate data were given as the upper boundary condition (B.C.). For the bottom B.C., constant upward flux, which meant the inflow flux to the field from outside, was given. Seepage face condition was employed for the surrounding of the underdrain. Initial condition was employed as GWL=60cm. Then we compared the simulated and observed results of volumetric water content at depth of 15cm and GWL. While the model described the variation of GWL well, it tended to overestimate the soil moisture through the growing period. Judging from the field condition, and observed data of soil moisture and GWL, consideration of soil structure (e.g. cracks and clods) in determination of soil hydraulic parameters at the plowed layer may improve the simulation results of soil moisture.

• Journal of Korean Dental Science
• /
• v.10 no.1
• /
• pp.29-34
• /
• 2017

Purpose: The purpose of this study was to evaluate the microleakage of various types of resin-bonded fixed partial dentures (RBFPDs) after artificial aging. Materials and Methods: Forty models with missing first molar were fabricated using artificial resin teeth and were divided into four groups: Group A, conventional RBFPDs design; Group B, modified RBFPDs design; Group C, assembled 3-piece RBFPDs design; and Group D, assembled 3-piece RBFPDs with different occlusal rest positions. Half of the specimens underwent chewing simulation process (240,000 cycles, 50 N load, 1.7 Hz) and thermocycling (temperatures $5^{\circ}C{\sim}55^{\circ}C$, dwelling time 30 seconds) and the remaining 20 specimens didn't receive any treatment. All the specimens were immersed in 2% methylene blue solution for 24 hours to evaluate microleakage, and were sectioned at the middle part of abutment teeth. To evaluate the microleaskage, a dye penetration was calculated. Result: With artificial aging, cyclic loading and thermocycling, a 3-piece RBPFD and a 2-piece RBPFD using original tooth undercuts have significantly lower microleakge (P<0.05) compared to the conventional design of RBPFD and modified RBPFD. Conclusion: Within the limit of this experiment, the assembled RBFPDs exhibited a smaller microleakage than the conventional RBFPDs, implying that the assembled RBFPDs can be more effective for reducing the dislodgement of the RBFPDs.

• Journal of Hospice and Palliative Care
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2013

Purpose: The aim of this study was to investigate nursing students' awareness of biomedical ethics and attitudes toward death of terminal patients. Methods: A structured questionnaire was developed to examine nursing students' biomedical ethics. Their attitudes toward terminal patients' death were measured by using the Collett-Lester Fear of Death Scale. Surveys were conducted with 660 nursing students enrolled at a three-year college located in Daejeon, Korea. Data were analyzed using descriptive statistics, Wilcoxon rank sum test and Kruskall Waills test. Results: Students who have experienced biomedical ethics conflicts, agreed to prohibition of cardiopulmonary resuscitation (CPR) and have no religion exhibited more negative attitudes toward death compared to students without the above characteristics. Of the participants, 81.2% answered that life sustaining treatment for terminal patients should be discontinued and 76.4% replied that CPR on terminal patients should be prohibited. The majority of the correspondents stated that the two measures above are necessary "for patients' peaceful and dignified death". Conclusion: Study results indicate the need to establish a firm biomedical ethics value to help nursing students form a positive attitude toward death. It also seems necessary to offer students related training before going into clinical practice, if possible. The training program should be developed by considering students' religion, school year, experience with biomedical ethics conflicts and opinion about CPR on terminal patients. The program should also include an opportunity for students to experience terminal patient care in advance via simulation practice on standardized patients.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.1
• /
• pp.9-18
• /
• 2004

This paper presents an efficient image compression method for memory reduction in multimedia processor which can be simply implemented in hardware and provides high performance. The multimedia processor, which includes processing of high-resolution images and videos, requires large memories: they are external frame memories to store frames and internal line memories for implementing some linear filters. If we can reduce those memories by adopting a simple compression method in multimedia processor, it will strengthen its cost competitiveness. There exist many standards for efficiently compressing images and videos. However, those standards are too complex for our purpose and most of them are 2-D block-based methods, which do not support raster scanned input and output. In this paper, we propose a low-complexity compression method which has good performance, can be implemented with simple hardware logic, and supports raster scan. We have adopted 1${\times}$8 Hadamard transform for simple implementation in hardware and compression efficiency. After analyzing the coefficients, we applied an adaptive thresholding and quantization. We provide some simulation results to analyze its performance and compare with the existing methods. We also provide its hardware implementation results and discuss about cost reduction effects when applied in implementing a multimedia processor.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.70-70
• /
• 2015

하천에서의 수문/수리적 특성은 주수로의 다양한 지형학적 형태로 나타난다. 특히 흐름과 수반된 유사량의 변화는 하천의 지형학적, 수리기하적 특성을 지배하며, 하도의 물리적 시스템을 변화시켜 동적 평형에 이르게 된다. 하천에서 하도 형성에 지배적인 역할을 하는 수리특성은 하도형성유량으로 지배유량이며, 보통 만제유량을 사용한다. Dunne and Leopold(1978)는 만제유량을 유사의 이송, 하천의 사행, 유선형의 변화 등 하천의 일반적인 형태를 변화시키며, 주수로의 특성을 형성하는 유량으로 정의하였다. 이와 같이 수리 지형학적 특성을 반영하는 만제유량은 하천의 특성을 나타내는 중요한 요소이다. 따라서 본 연구에서는 한강 수계 20개 하천, 27개 수위 관측소의 최소 10년 이상의 실측 자료를 기반으로 다년간의 연평균 실측유량을 산정하였으며, McCandless(2003)가 제시한 지형학적 만제지표를 이용하여 추정한 만제유량과의 상관성을 분석하였다. 추정된 만제유량은 HEC-RAS model을 이용하여 만제하폭, 만제수심, 만제 시 평균유속을 산정하였다. 27개 지점의 실측유량과 만제유량의 상관성 분석결과 만제유량은 연평균 일유량의 7.7배로 나타났다. 따라서 만제유량을 7일 평균유량(1 week mean discharge)으로 정의하였으며, 수정된 7일 유량과 만제유량의 RMSE는 13.90 m/s, MAPE는 9.94 %로 상관성이 매우 높게 나타났다. 또한 만제유량과 만제하폭, 만제수심, 평균유량, 구간경사와 상관성 분석결과 개별적으로의 상관성은 나타나지 않았으나, 만제하폭, 수심, 평균유량과 만제유량에 대한 회귀 분석을 실시한 결과 $R^2$는 0.911로 매우 높게 나타났으며, 구간경사를 추가하여 분석한 결과 $R^2$가 0.914로 증가하였다. 따라서 만제유량은 수리 기하학적 특성이 모두 반영된 하천 특성을 나타내는 복합적인 지표임을 확인하였다. 아울러 만제유량을 통해 추정된 연평균 유량($48{\cdot}Q_{bf}$)을 우리나라의 월간 유출량 분포 비율을 이용하여 일유량으로 배분/생성하였으며, 생성된 일유량을 통해 CCHE2D model을 이용하여 하상변동 모의를 수행하였다. 대상 구간은 병성천 최하류로부터 상류로 7 km 구간이며, 2013년 1월과 12월 측량 자료를 통한 1년간의 실제 하상 변동 자료와 2013년 실측 유량자료에 따른 하상변동 모의 결과 및 만제유량에 의해 배분/생성된 일유량에 따른 하상변동 모의 결과를 비교하였다. 비교 분석 결과 7일 평균 유량으로 정의된 만제유량을 통해 배분/생성된 유량의 수치모의 결과는 실제 측량자료 및 실측유량자료에 따른 하상변동 결과와 매우 일치하는 것을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.580-580
• /
• 2015

하천에서의 수문/수리적 특성은 주수로의 다양한 지형학적 형태로 나타난다. 특히 흐름과 수반된 유사량의 변화는 하천의 지형학적, 수리기하적 특성을 지배하며, 하도의 물리적 시스템을 변화시켜 동적 평형에 이르게 된다. 하천에서 하도 형성에 지배적인 역할을 하는 수리특성은 하도형성 유량으로 지배유량이며, 보통 만제유량을 사용한다. Dunne and Leopold(1978)는 만제유량을 유사의 이송, 하천의 사행, 유선형의 변화 등 하천의 일반적인 형태를 변화시키며, 주수로의 특성을 형성하는 유량으로 정의하였다. 이와 같이 수리 지형학적 특성을 반영하는 만제유량은 하천의 특성을 나타내는 중요한 요소이다. 따라서 본 연구에서는 한강 수계 20개 하천, 27개 수위 관측소의 최소 10년 이상의 실측 자료를 기반으로 다년간의 연평균 실측유량을 산정하였으며, McCandless(2003)가 제시한 지형학적 만제지표를 이용하여 추정한 만제유량과의 상관성을 분석하였다. 추정된 만제유량은 HEC-RAS model을 이용하여 만제하폭, 만제수심, 만제 시 평균유속을 산정하였다. 27개 지점의 실측유량과 만제유량의 상관성 분석결과 만제유량은 연평균 일유량의 7.7배로 나타났다. 따라서 만제유량을 7일 평균유량(1 week mean discharge)으로 정의하였으며, 수정된 7일 유량과 만제유량의 RMSE는 13.90m/s, MAPE는 9.94 %로 상관성이 매우 높게 나타났다. 또한 만제유량과 만제하폭, 만제수심, 평균유량, 구간경사와 상관성 분석결과 개별적으로의 상관성은 나타나지 않았으나, 만제하폭, 수심, 평균유량과 만제유량에 대한 회귀 분석을 실시한 결과 $R^2$는 0.911로 매우 높게 나타났으며, 구간경사를 추가하여 분석한 결과 $R^2$가 0.914로 증가하였다. 따라서 만제유량은 수리 기하학적 특성이 모두 반영된 하천 특성을 나타내는 복합적인 지표임을 확인하였다. 아울러 만제유량을 통해 추정된 연평균 유량($48{\cdot}Q_{bf}$)을 우리나라의 월간 유출량 분포 비율을 이용하여 일유량으로 배분/생성하였으며, 생성된 일유량을 통해 CCHE2D model을 이용하여 하상변동 모의를 수행하였다. 대상 구간은 병성천 최하류로부터 상류로 7 km 구간이며, 2013년 1월과 12월 측량 자료를 통한 1년간의 실제 하상 변동 자료와 2013년 실측 유량자료에 따른 하상변동모의 결과 및 만제유량에 의해 배분/생성된 일유량에 따른 하상변동 모의 결과를 비교하였다. 비교 분석 결과 7일 평균 유량으로 정의된 만제유량을 통해 배분/생성된 유량의 수치모의 결과는 실제 측량자료 및 실측유량자료에 따른 하상변동 결과와 매우 일치하는 것을 확인하였다.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2020

In the development of geodynamic structures such as subduction and rift zones, a weakening mechanism is essential for localized weak zone formation in the lithosphere. Shear heating, a weakening mechanism, generates short-wavelength temperature elevation in the lithosphere; the increased temperature can reduce lithospheric strength and promote its breakup. A two-dimensional elastoplastic extensional basin model was used to conduct benchmarking based on previous numerical simulation studies to quantitatively analyze shear heating. The amount of shear heating was investigated by controlling the yield strength, extensional velocity, and strain- and temperature-dependent weakening. In the absence of the weakening mechanism, the higher yield strength and extensional velocity led to more vigorous shear heating. The reference model with a 100-MPa yield strength and 2-cm/year extension showed a temperature increase of ~ 50 K when the bulk extension was 20 km (i.e., 0.025 strain). However, in the yield-strength weakening mechanism, depending on the plastic strain and temperature, more efficient weakening induced stronger shear heating, which indicates positive feedback between the weakening mechanism and the shear heating. The rate of shear heating rapidly increased at the initial stage of deformation, and the rate decreased by 80% as the lithosphere weakened. This suggests that shear heating with the weakening mechanism can significantly influence the strength of relatively undamaged lithosphere.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2021

In the design of a tunnel boring machine (TBM), the excavation efficiency of the equipment depends on the design of the cutter head, which is directly in contact with the ground. Especially, the allocation of disc cutter is crucial issue. Disc cutters can be divided into center cutter zone, inner cutter zone and transition cutter zone depending on where they are placed. Many studies have been conducted to identify optimal cutting conditions for face cutters. However, research to determine the optimal cutting conditions for the transition cutter has been relatively incomplete. In this study, to identify the optimal cutting conditions for the transition cutter, numerical analysis using discrete element method was performed, and the specific energy curve according to the angle between the transition cutters was drawn to find out the optimum cutting conditions. The results show that the angle between the transition cutters showing minimum specific energy in the transition cutter zone is 9°. Transition cutter zone was divided into three sections according to the slope angle of the transition cutter. It is also found that, the greater the slope angle of the transition cutter. This finding shows good agreement with the present design of transition cutter zone.