• Economic and Environmental Geology
• /
• v.16 no.4
• /
• pp.269-276
• /
• 1983

This paper describes three-dimensional (3-D) standard curves for single prismatic buried bodies in induced polarization (IP) method. Dipole-dipole IP responses for the bodies are calculated by the numerical modeling technique using an integral equation solution. The pattern of IP responses for conductive targets depends on the ratio of the width of body to the depth extent. The IP response of a body of six units in strike length approximates that of a two-dimensional body. In addition, if the strike length is long enough, a layered-earth interpretation is applicable for a body much longer than four units in width. Moving an IP line away from the center of a body alon gstrike produces an effect similar to that of increasing the depth. Moving the location of body along line has little effect to the pattern of IP responses.

• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.443-453
• /
• 2011

The purpose of present study is to develop a noise map around Korean Train Express (KTX) line. It is also to evaluate the high speed railway noise influence in neighboring areas around KTX. In order to develop the noise map, noise source modeling and 3-D noise radiation simulation have been performed by means of SoundPLAN program. The result of the noise map has been verified in comparison with the measured noise level. Noise measurements have been performed at 15 locations around KTX line. At each locations, 6 microphones were located 1.5m and 3m above the ground at each of 25m, 50m and 75 m distances from a center of the KTX track. The noise map showed clearly the high speed railway noise influence in neighboring areas around KTX line. The present study has also showed the noise could be reduced by using noise barriers constructed at severely noise-exposed locations.

• Wind and Structures
• /
• v.7 no.2
• /
• pp.107-130
• /
• 2004

This paper presents a time-domain approach for analyzing nonlinear random vibrations of long-span suspended cables under transversal wind. A consistent continuous model of the cable, fully accounting for geometrical nonlinearities inherent in cable behavior, is adopted. The effects of spatial correlation are properly included by modeling wind velocity fluctuation as a random function of time and of a single spatial variable ranging over cable span, namely as a one-variate bi-dimensional (1V-2D) random field. Within the context of a Galerkin's discretization of the equations governing cable motion, a very efficient Monte Carlo-based technique for second-order analysis of the response is proposed. This procedure starts by generating sample functions of the generalized aerodynamic loads by using the spectral decomposition of the cross-power spectral density function of wind turbulence field. Relying on the physical meaning of both the spectral properties of wind velocity fluctuation and the mode shapes of the vibrating cable, the computational efficiency is greatly enhanced by applying a truncation procedure according to which just the first few significant loading and structural modal contributions are retained.

• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.155-160
• /
• 1998

EM tomography technique has been developed. The algorithm used the extended Born approximations for forward modeling and reconstructed a conductivity image by a smoothness constraint least squares inversion method. Observed data, the vertical components of secondary magnetic fields, were simulated with the 3-D integral equation code. The results showed that the location of anomalous body could be imaged very well, but conductivity of the body was lower than real one and the vertical resolution was much higher than the horizontal resolution.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1669-1679
• /
• 2017

Background: Steam generator (SG) is one of the significant components in the nuclear steam supply system. A variety of SGs have been designed and used in nuclear reactor systems. Every SG has advantages and disadvantages. A brief account of some of the existing SG designs is presented in this study. A high surface to volume ratio of a SG is required in small modular reactors to occupy the least space. In this paper, performance improvement for SGs of integral small modular reactor is proposed. Aims/Methods: For this purpose, cross-grooved microfins have been incorporated on the inner surface of the helical tube to enhance heat transfer. The primary objective of this work is to investigate thermal-hydraulic behavior of the proposed improvements through modeling in RELAP5-3D. Results and Conclusions: The results are compared with helical-coiled SGs being used in IRIS (International Reactor Innovative and Secure). The results show that the tube length reduces up to 11.56% keeping thermal and hydraulic conditions fixed. In the case of fixed size, the steam outlet temperature increases from 590.1 K to 597.0 K and the capability of power transfer from primary to secondary also increases. However, these advantages are associated with some extra pressure drop, which has to be compensated.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1051-1054
• /
• 2013

Closo-carborane has been considered as an efficient boron-carrier for boron neutron capture therapy (BNCT) and an attractive surrogate of lipophilic phenyl or cyclohexyl ring in drug design. Despite a great number of carborane-containing ligands have been synthesized and evaluated, molecular modeling studies of carborane ligands with macromolecules have been rarely reported. We herein describe a facile docking and scoring-function strategy of 16 carborane ligands with an estrogen receptor by using the commercial Gaussian, Chem3D Pro and Discovery Studio (DS) computational programs. Docked poses of the carborane ligands in silico exhibited similar binding modes to that of the crystal ligand in the active site of estrogen receptor. Score analysis of the best docked pose for each ligand indicated that the Ligscore1 and the Dockscore have a moderate correlation with in vitro biological activity. This is the first report on the scoring-correlation studies of carborane ligands with macromolecules. The integrated Gaussian-DS approach has a potential application for virtual screening, De novo design, and optimization of carborane ligands in medicinal chemistry.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.18-25
• /
• 2004

The purpose of this paper was to find out the proper equation to predict the gas transfer rate for designing intravenous artificial lung assist device. The prepared hollow fiber modules were examined under various experimental conditions through experimental modeling before inserted the artificial lung assist d $\varepsilon$ vice into as venous. As a result, we can estimate the gas transfer as a function of the packing density. The gas transfer obtained from the experiment was similar to that from the equation, confirming the usefulness equation. Therefore, we can conclude the gas transfer of the intravenous artificial lung assist device as a function of the packing density, and this functions are very useful for predicting the gas transfer of the intravenous artificial lung assist device.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.9-17
• /
• 2002

The study is insufficient on process planning of the elliptical deep drawing product. Thus, in this present study, the expert system for elliptical deep drawing products was constructed by using process sequence design. The expert system was developed to be based on the general concept of each entity. The system was developed in this work consists of sixth modules. The first one is a shape recognition module to recognize non-axisymmetric products and to generate Entity_list. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create suggested blanks of three shapes with the identical surface area. The fourth one is shape design module based on the production rules that play the most important role in an expert system for manufacturing. The production rules are generated and upgraded by inter- viewing field engineers, plastic theory and experiments. The fifth and sixth ones are a graphic module to visualize results of the expert system and a post module to rise user's convenience, respectively. According to constructed the expert system for process sequence design, it was possible to reduce the lead time.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.199-207
• /
• 2005

We recognize analysing and quantifying an effect of light and colors on people' psychological response changing according to environmental conditions as important. Therefore, this study intends to improve efficiency in realizing emotional design that contributes to creation of helpful and pleasant interior using architecture that is able to refresh human emotion or light and colors which are important factors in interior design. For the purpose, this study analyses an effect of colors in interior space and the effect of interaction between light and color through modeling to identify types of psychological response. And it is to present a generalized conclusion through an analysis of meaning of the two effects. The ultimate goal of this study is to identify the value and possibility of actual design. This study measures response on questionnaire through representative vocabulary by abstracting based on evaluation image selected through the 1st and 2nd preparatory research and grouping similar words. In next step, images represented both by light and colors are presented as virtual space and for data input and analysis based on psychological response corresponding to each image, this study uses SPSS 11.0 statistical package program to analyse data collected. The space to be experimented is a livingroom, a center of residential area.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.551-560
• /
• 2012

Target detection by acoustic barrier method includes active and passive sonar technique and time reversal process whose theoretical background is already well defined. In this paper, the concept and theory of underwater detection by passive ocean time reversal is established. Also, the reason that this study was conducted was to investigate feasibility of complex mathematical modeling to provide some predictive capability for underwater acoustic barrier with passive time reversal. It may eventually lead to a useful predictive tool when designing underwater acoustic barrier detection system using the passive time reversal concept.