• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.550-555
• /
• 2003

최근에 Lidar 데이터를 이용한 3차원 위치 정보와 지표면 속성 정보를 취득하는 연구가 많이 진행되고 있다. 높은 위치 정확도, 3차원 데이터 동시 취득, 기존 측정 방식에 비하여 점 데이터 취득의 자동화, 데이터 정확도의 안정성 등으로 인하여 복잡한 지형 및 인공구조물이 존재하는 지역에서 Lidar 데이터의 응용 사례가 많이 나타나고 있으며, 특히 건물 모델링에서 반자동 방식의 디지털 사진측량에 비하여 자동 모델링의 가능성을 보여주고 있다. 일반적으로 Lidar 데이터의 점밀도는 1점/㎡이내이며, 촬영된 스트립을 중복시켜 점밀도를 높이기도 한다. 건물은 크기와 형태가 다양하기 때문에 모델링에 필요한 점밀도를 제시하기는 어렵지만 5점 내외에서 모델링이 가능하다고 알려져 있으며 건물이외에 다른 지형지물에 대한 모델링 연구는 거의 이루어지지 않고 있다. 따라서 본 논문에서는 Lidar 데이터의 점밀도에 따라 지물의 모델링 가능성을 평가하고 효율적인 데이터 취득 방안을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2013-2020
• /
• 2010

This paper presents a study on the modeling for transparent toaster with a cap of folding type. The toaster was modelled to solve problems of customer's unsatisfaction such as heat loss, input of a piece of dirt, unidentified heating state of sliced toaster. Rapid prototyping was followed by the first modeling, and the second modeling was implemented in order to solve the problems of the first modeling such as interference of holder and door, and the third modeling was developed with a cap of folding type through analysis of assembly and simulation. The 3D modeling tool used in this paper was Pro/Engineer 4.0. The modeling was designed to minimize heat loss and structured with transparent outer case. So the toasting procedure will be identified with the naked eye, and the transparent toaster will improve the customer's aesthetic satisfaction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.619-628
• /
• 2009

LiDAR has capability of rapid data acquisition and provides useful information for reconstructing surface of the Earth. However, Extracting information from LiDAR data is not easy task because LiDAR data consist of irregularly distributed point clouds of 3D coordinates and lack of semantic and visual information. This thesis proposed methods for automatic extraction of buildings and 3D detail modeling using airborne LiDAR data. As for preprocessing, noise and unnecessary data were removed by iterative surface fitting and then classification of ground and non-ground data was performed by analyzing histogram. Footprints of the buildings were extracted by tracing points on the building boundaries. The refined footprints were obtained by regularization based on the building hypothesis. The accuracy of building footprints were evaluated by comparing with 1:1,000 digital vector maps. The horizontal RMSE was 0.56m for test areas. Finally, a method of 3D modeling of roof superstructure was developed. Statistical and geometric information of the LiDAR data on building roof were analyzed to segment data and to determine roof shape. The superstructures on the roof were modeled by 3D analytical functions that were derived by least square method. The accuracy of the 3D modeling was estimated using simulation data. The RMSEs were 0.91m, 1.43m, 1.85m and 1.97m for flat, sloped, arch and dome shapes, respectively. The methods developed in study show that the automation of 3D building modeling process was effectively performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1505-1510
• /
• 2018

Product modeling technology for graphics is rapidly developing. And 3D data application and usability are increasing.modeling of product design is a very important factor in constructing. 3D modeling in product design takes a lot of production time. Recently, the reverse design method is very useful because of application of 3D data and shortening of production time. In this study, first, 3D point cloud and mesh data are generated using photographs based on image data. The second is to modify the design and the third is to make the prototype with the 3D printer. This product design and production process suggests the utilization and possibility of image data, the shortening of 3D modeling production time and efficient processes. Also, the product design process proposes a model of a new product development system to adapt to the production environment.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.545-556
• /
• 2018

This study was conducted to estimate the deep percolation using numerical modeling and field observation data based on rainfall in Haean basin. Soil moisture sensors were installed to monitoring at 30, 60 and 90 cm depths in four sites (YHS1-4) and automatic weather station was installed to around YHS3. Soil moisture and meteorological data was observed from March 25, 2017 to March 25, 2018 and May 06, 2016 to May 06, 2018, respectively. Numerical analysis was performed from June to August, 2017 using the HYDRUS-1D. Average soil moisture contents were high to generally in YHS3 for 0.300 to $0.334m^3/m^3$ and lowest in YHS1 for 0.129 to $0.265m^3/m^3$ during the soil moisture monitoring period. The results of soil moisture flow modeling showed that field observations and modeling values were similar but the peak values were larger in the modeling result. Correlation analysis between observation and modeling data showed that r, $r^2$ and RMSE were 0.88, 0.77, and 0.0096, respectively. This show high correlation and low error rate. The total deep percolation was 744.2 mm during the period of modelling at 500 cm depth. This showed that 61.3% of the precipitation amount (1,214 mm) was recharged in 2017. Deep percolation amount was high in the study area. This study is expected to provide basic data for the estimation of groundwater recharge through unsaturated zone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.23-32
• /
• 2015

Modeling of fighter pilots, which is a fundamental technology for war games using defense M&S (Modeling & Simulation) becomes one of the prominent research issues as the importance of defense M&S increases. Especially, the recent accumulation of combat logs makes it possible to adopt statistical learning methods to pilot modeling, and an HMM (Hidden Markov Model) which is able to utilize the sequential characteristic of combat logs is suitable for the modeling. However, since an HMM works only by using one type of features, discrete or continuous, to apply an HMM to heterogeneous features, type integration is required. Therefore, we propose a dPCA-HMM method, where dPCA (Discrete Principal Component Analysis) is combined with an HMM for the type integration. From experiments conducted on combat logs acquired from a simulator furnished by agency for defense development, the performance of the proposed model is evaluated and was satisfactory.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.179-190
• /
• 2017

A terrestrial LiDAR survey was conducted and unmanned aerial vehicle(UAV) images were taken for target cultural properties to present the utilization measures of terrestrial LiDAR and UAV in three-dimensional modeling of cultural properties for the identification of the status and restoration of cultural properties. Then the accuracy of the point clouds generated through this process was compared, an overlap analysis of the 3D model was conducted, and a convergence model was created. According to the results, the modeling with terrestrial LiDAR is more appropriate for precise survey because 3D modeling for the detection of displacement and deformation of cultural properties requires an accuracy of mm units. And UAV model has limitation as the impossibility of detailed expression of parts with sharp unevenness such as cracks of bricks. However, it is found that the UAV model has a wide range of modeling and has the advantage of modeling of real cultural properties. Finally, the convergence model created in this study using the advantages of the terrestrial LiDAR model and the UAV model could be efficiently utilized for the basic data development of cultural properties.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.145-147
• /
• 2002

기존 대부분의 방향관계에 대한 연구는 2차인 이미지에서 절대적인 방향에 대한 연구가 주를 이루고 있다. 본 논문에서는 기존 2차일 방향관계 모델링 기법을 분석하고 2D 스트링 기법을 확장해서 3차인 공간상에서 방향관계를 모델링하기 위할 3D 스트링 기법을 소개한다. 그리고 3차원 공간에서 시점 기반의 방향관계 실의를 처리하기 위한 기법으로 3차원 공간을 2차원+1차원으로 표현하여 처리하는 기법에 대해 기술판다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.338-344
• /
• 2017

In this paper, an interpolation method of HRTF (Head-Related Transfer Function) is proposed for small-sized measurement data set, especially. The proposed algorithm is based on acoustic modeling of HRTFs, and the algorithm tries to interpolate the HRTFs via estimation the model coefficients. However, the estimation of the model coefficients is hard if there is lack of measurement points, so the algorithm solves the problem by a data augmentation using the VBAP (Vector Based Amplitude Panning). Therefore, the proposed algorithm consists of two steps, which are data augmentation step based on VBAP and model coefficients estimation step by least squares method. The proposed algorithm was evaluated by a simulation with a measured data from CIPIC (Center for Image Processing and Integrated Computing) HRTF database, and the simulation results show that the proposed algorithm reduces mean-squared error by 1.5 dB ~ 4 dB than the conventional algorithms.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2004

본 논문에서는 바이러스와 같은 생화학 물질의 분자구조를 3 차원 모델로 시각화하여 관찰하고, 그 분자모델을 직관적인 방법으로 조작하기 위한 가상 현실 분자 모델링 시스템을 제안한다. 이 시스템을 사용하면, 입체영상 디스플레이 장치와 데이터 글러브 및 동작 추적 장치를 사용하여 3 차원 분자 모델을 실감나게 조작할 수 있어서 효율적으로 분자들을 관찰하고 결합, 분리하는 등의 분자 모델링 작업이 가능하다. 사용자들은 마우스나 키보드 등의 장비 대신에 자연스러운 몸 동작이나 손 동작을 이용하여 분자 모델링 작업을 위한 동작을 하게 된다. 분자들의 결합을 화학적으로 정확하게, 그리고 실시간으로 시뮬레이션 하기 위해서 에너지 계산 알고리즘을 구현하였으며 이러한 작업이 가능하도록 분자 구조를 표현하는 새로운 자료구조를 제안하였다. 본 연구에서 제안하는 동작 기반의 VR 분자 모델링 시스템의 타당성을 검증하기 위하여 HIV 바이러스 분자를 가지고 분자 모델링 작업을 수행하였고, 사용자 테스트를 실시하여 기존의 방식과 작업 성능 및 사용자 만족도를 비교하였다.