• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.94-101
• /
• 2015

To mitigate the greenhouse gas emission, many carbon capture and storage projects are underway all over the world. In Korea, many studies focus on the storage of $CO_2$ in the offshore sediment. Assurance of safety is one of the most important issues in the geological storage of $CO_2$. Especially, the assessment of possibility of leakage and amount of leaked $CO_2$ is very crucial to analyze the safety of marine geological storage of $CO_2$. In this study, the leakage of injected $CO_2$ through fault was numerically studied. TOUGH2-MP ECO2N was used to simulate the subsurface behavior of injected $CO_2$. The storage site was 150 m thick saline aquifer located 825 m under the continental shelf. It was assumed that $CO_2$ leak was happened through the fault located 1,000 m away from the injection well. The injected $CO_2$ could migrate through the aquifer by both pressure difference driven by injection and buoyancy force. The enough pressure differences made it possible the $CO_2$ to migrate to the bottom of the fault. The $CO_2$ could be leaked to seabed through the fault due to the buoyancy force. Prior to leakage of the injected $CO_2$, the formation water leaked to seabed. When $CO_2$ reached the seabed, leakage of formation water stopped but the same amount of sea water starts to flow into the underground as the amount of leaked $CO_2$. To analyze the effect of injection rate on the leakage behavior, the injection rate of $CO_2$ was varied as 0.5, 0.75, and $1MtCO_2/year$. The starting times of leakage at 1, 0.75 and $0.5MtCO_2/year$ injection rates are 11.3, 15.6 and 23.2 years after the injection, respectively. The leakage of $CO_2$ to the seabed continued for a period time after the end of $CO_2$ injection. The ratios of total leaked $CO_2$ to total injected $CO_2$ at 1, 0.75 and $0.5MtCO_2/year$ injection rates are 19.5%, 11.5% and 2.8%, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2017

In this paper, we implemented for the development of a high output induction lamp system, which lamp design is optimized by gas type, mixing ratio, pressure and discharge tube size, amalgam type and mixing ratio, and characteristics of ferrite core in the lamp. It's the circuit design by improving the power factor and efficiency according to the driving method, which has analyzing the characteristics according to the waveform and frequency. Finally, luminaries design part for applying the optimal lighting system considering the surrounding environment, the characteristics of the lighting circuit for electrodeless lamp has analyzed and the improvement has been proceeded. In conclusion, the driving frequency has optimized at 135kHz with degrading $7{\sim}10^{\circ}C$ based on the results of the optical characteristics of the induction lamp on peak noise FET(Q3,Q4) damage.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.68-72
• /
• 2008

Fiber-optic strain sensors based on Bragg reflection gratings produce the change of reflection spectrum when an external stress is applied on the sensor. To measure the Bragg reflection wavelength in high speed, an arrayed waveguide grating device is incorporated in this work. By monitoring the output power from each channel of the AWG, the peak wavelength corresponding to the applied strain could be obtained. To enhance the accuracy of the AWG wavelength interrogation system, a chirped fiber Bragg grating with a 3-dB bandwith of 5.4 nm is utilized. The high-speed response of the proposed system is demonstrated by measuring a fast varying strain produced by the damped oscillation of a cantilever. An oscillation frequency of 17.8 Hz and a damping time constant of 0.96 second are obtained in this measurement.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1075-1082
• /
• 1999

Composite air electrodes of 50/50 vol% LSM- YSZ where LSM =$\textrm{La}_{1-x}\textrm{Sr}_{x}\textrm{MnO}_{3}$(0$\leq$x$\leq$0.5) were prepared by colloidal deposition technique. The electrodes were then examined by scanning electron microscopy (SEM) and studied by ac impedance spectroscopy in order to improve the performance of a solid oxide fuel cell (SOFC). Reproducible impedance spectra were confirmed by using the improved cell, consisting of LSM- YSZ/YSZ/LSM-YSZ. These spectra were a strong function of operating temperature and the stable conditions for the cells were typically reached at $900^{\circ}C$. The typical spectra measured for an air//air cell at $900^{\circ}C$ were composed of two arcs. Addition of YSZ to the LSM electrode led to a pronounced decrease in cathodic resistivity of LSM-YSZ composite electrodes. Polishing the electrolyte surface to eliminate the influences of surface impurities could further reduce cathode resistivity. The cathodic resistivity of the LSM-YSZ electrodes with catalytic interlayer (Ni or Sr) was much smaller than that of LSM-YSZ electrodes without catalytic interlayer. In addition, the cathodic resistivity of the LSM-YSZ electrodes was a strong function of composition of electrode materials, the electrolyte geometry, and applied current.

• Applied Biological Chemistry
• /
• v.16 no.2
• /
• pp.60-77
• /
• 1973

The non-enzymatic browning phenomenons of red ginseng were studied to identify these compounds which function as the factors for browning. The samples were classified into five divisions; Fresh ginseng, blanched ginseng, sun dried red ginseng, dehydrated red ginseng, and browning accelerated red ginseng respectively, and the various compounds in each of them were analyzed quantitatively and investigated the compounds which were thought to function for browning during the drying and the dehydration processes; the results were as follows. 1. The chemical compositions among five divisions did not show any difference except a) total and reducing sugars, b) total acids, c) water soluble extracts; a) and b) were decreased during the drying process, c) was decreased about 6-7% in red ginseng divisions. 2. Sixteen free amino acids; asp., thr., ser., glu., gly., ala., val., cys., met., ileu., leu., tyr., phe., lys., his., and arg, were identified in each division. Among them the arg, was extremly high. All of the essential amino acids were contained, while generally these amino acids were decreased in drying period and their rates were smaller in dehydrated red ginseng than in sun dried red ginseng. 3. Three kinds of sugars; fructose, glucose and sucrose were identified and other four kinds of unidentified sugars were seperated. The content of sucrose was 80% and all kind of sugars were generally less in red ginseng divisions than in the other two divisions. The decreasing rate of sngars was higher in the sun dried red ginseng than in the dehydrated red ginseng. Especially the decreasing rate of the reducing sugars was high as compared with that of sucrose. 4. Almost all the ascorbic acid was decomposed during the blanching whereas there could'nt be shown any change of the ascorbic acid content during the period of drying. 5. Eleven kinds of volatile acids; acetic acid, propionic acid, acrylic acid, iso-butyric acid, n-butyric acid, isovaleric acid, n-valeric acid, isoheptylic acid, n-heptylic acid, and an unknown volatile acid were identified. They showed a little decrease during the period of blanching perhaps on account of their volatility whereas they were increased in drying period. 6. Six kinds of non-volatile acids; citric acid, malic acid, ${\alpha}-ketoglutaric$ acid, succinic acid, pyruvic acid and glutaric acid were identified. The content of them were decreased during the drying procedures in red ginseng but only that of succinic acid was increased. 7. Three kinds of polyphenols; 3-caffeyl quinic acid, 4-caffeyl quinic acid, 5-caffeyl quinic acid and an unknown polyphenol were identified. The content of them showed considerable decrease during the drying procedures, especially in sun drying. 8. The intensity of the browning in each divisior was as follows; browning accelerated red ginseng> sun dried red ginseng> dehydrated red ginseng. 9. In the process of red ginseng preparation, a. certain relationship could be found between the decreasing rates of amino acids, reducing sugars, polyphenols and the intensity of browning. Therefore the browning phenomenon may be concluded that nonenzymatic browning reactions of the amino-carbonyl reaction and autoxidation of polyphenols are the most important processes, furthermore, as their reactions could be controlled it is thought to be possible to accelerate effectively browning within a relatively short period.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.149-157
• /
• 2003

Purpose: The purpose of this study was to determine if there were prognostic differences between BRCA related and BRCA non-related Korean patients with early-onset breast carcinomas. Materials and Methods: Sixty women who had developed breast cancers before the age of 40, and who were treated at the Soonchunhyang University Hospital, were studied independently of their family histories. The age range was 18 to 40 with a median of 34.5 years. Lymphocyte specimens from peripheral blood were studied for the heterozygous mutations of BRCA1 and BRCA2 using direct sequencing methods. Immunohistochemistry was peformed on the paraffin-embedded tissue blocks that were available. Results: Eleven deleterious mutations (18.3%, 6 in BRCA1 and 5 in BRCA2) and 7 missense mutations of unknown significance (11.7%), were found among the 60 patients. More than half of the mutation were novel, and were not reported in the database. Most of the BRCA-associated patients had no history of breast cancer. No treatment related failures were observed in the BRCA carriers, with the exception of one patient that had experienced a new primary tumor of the contralateral breast. The seven year relapse free survival rate were 50 and 79% In the BRCA carrier and BRCA negative patients, respectively. Although the expression of estrogen and progesterone receptors were less common, and histological features more aggressive, in the BRCA associated tumors, the outcome of the patients with BRCA mutations was not poorer than that on the patients without deleterious mutations. Conclusion.: Despite the BRCA mutation carriers having adverse prognostic features, the recurrence rate was relatively lower than that in the BRCA non-carrying Korean patients wi4h early-onset breast carcinomas. In addition, although the prevalence of the BRCA mutation in Korean patients was higher than that in white patients, the penetrance of the cancer seemed to be relatively low in Korean women carrying BRCA mutations. A large population based study of the BRCA mutation, with a long-term follow-up of the study patients will be required to confirm these results.