Journal of Korean Society of Disaster and Security
/
v.7
no.1
/
pp.43-50
/
2014
Based on the reliability theory, the risk assessment of steel beams is performed by the determination of failure probability. In the calculation, bending, shearing and combined (bending + shearing) modes are examined. The resistance and the loads on the beam are assumed to be normal distribution. To investigate the failure probability changes, total load applied at the mid span of beam is divided into 1 to 1 and 1 to 2 ratio and then these divided loads are placed on the trisected points on beam. The change of boundary conditions at beam ends are also included in the investigation. It shows that failure is governed by the combined mode for the present beams and the second order bound analysis of failure probability is not crucial. On the whole failure probability decreases with increasing end restraints at the beam ends with some exception.
KSCE Journal of Civil and Environmental Engineering Research
/
v.1
no.1
/
pp.21-32
/
1981
Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.
Proceedings of the Korean DIstribution Association Conference
/
2005.11a
/
pp.29-51
/
2005
Brands are important in the consumer market. They are the interface between consumers and the company, consumers may develop loyalty to brands. also, The late development of industrial marketing explains the near absence of research on Brand Equity in business to business. With recent change, industrial companies have shifted from a production focus to a customer focus. industrial brand is fast developing. The basic purpose of this study is to investigate industrial brand trust and loyalty affecting the Result of business relationship between industrial buyers and suppliers. Factors hypothesized to influence trust in a brand include a number of brand characteristics, company characteristics and consumer-brand characteristics. This research presented a comprehensive constructive model consisting of components of industrial brand trust and loyalty, and then propose the research model base on prior researches and studies about relationships among components of industrial brand loyalty. Data were gathered from respondents who work in industrial buying center. For this study, Data were analyzed by SPSS 10.0 and AMOS 4.0. The results of this research analysis were as fallow. Industrial brand trust and loyalty were positively related with a number of industrial brand characteristics, supplier characteristics and buyer-brand characteristics. relationship commitment. This research newly proposed the concept of 'industrial brand trust and loyalty affecting the Result of business relationship between industrial buyers and suppliers'
Kang Jin-Kee;Son Youngtae;Yoon Yeo-Hwan;Byun Sangchul
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.1
no.1
/
pp.22-32
/
2002
This paper describes about non-burial AVI (Automatic Vehicle Identification) system using general vehicle as probe car for obtaining more accurate traffic information while conserving road pavement surface. Existing spot traffic detectors have their own limits of not obtaining right information owing to its mathematical method. Burial AVI systems have some defects, causing traffic jam, needing much maintenance cost because of frequent cutting of loop and piezo-electric sensors. Especially, they have hard time to make right detection, when it comes to jamming time. Therefore, in this paper, we propose non-burial AVI system with laser trigger unit. Proposed non-burial AVI system is developed to obtain regional traffic information from normal Passing vehicle by automatic license number recognition technology. We have adapted it to national highway section between Suwon city and Pyong$\~$Taek city(9.5km) and get affirmative results. Vehicle detection rate of laser trigger unit is more than 95$\%$, vehicle recognition rate is 87.8$\%$ and vehicle matching rate is about 14.3$\%$. So we regard these as satisfying results to use the system for traffic information service. We evaluate proposed AVI system by regulation of some institutions which are using similar AVI system and the proposed system satisfies all conditions. For future study, we have plan of detailed research about proper lane number from all of the target lanes, optimal section length, information service period, and data fusion method for existing spot detector.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.2
/
pp.1-7
/
2016
Although the second driving device of KTX, which consists of the wheel and the axle reduction gears unit, is a mechanically integrated structure, its preventive maintenance (PM) requires two separate intervals due to the different technical requirements. In particular, these subsystems perform attaching and detaching work simultaneously according to the maintenance directive. Therefore, to reduce the unnecessary amount of PM and high logistic availability of the train, it is important to optimize PM with regard to reliability-centered maintenance toward a cost-effective solution. In this study, fault tree analysis and reliability of the subsystems, considering the criticality of the components, were performed using the data derived from field data in maintenance. The cost optimization of the PM was derived from a genetic algorithm considering the target reliability and improvement factor. The cost optimization was derived from a maximum of the fitness function of the individual in generation. The optimal TBO of them using the genetic algorithm was 2.85x106 km, which is reduced to approximately 21% compared to the conventional method.
인간은 사회적 접촉을 필요로 하고 타인과의 상호작용을 원하는 사회적 동물이다. 외로움은 한 개인의 사회적 관계의 망이 양적이나 질적으로 부족할 때 발생하는 불유쾌한 감정이다. 외로움은 매우 보편적인 감정이나 고통스러울 수 있으며 이러한 경험이 지속되면 정신적, 신체적 건강을 해칠 수 있을 뿐 아니라 자살을 초래하기도 한다. 특히 노인은 여러 가지 종류의 변화와 상실을 경험하기 때문에 외로움을 더 느낄 수 있다. 본 연구의 목적은 번역과 역번역 과정을 통해 Revised UCLA Loneliness Scale에 대한 한국어 UCLA 외로움 사정도구를 만들고 이 도구를 한국노인에게 적용하여 신뢰도와 타당도를 조사하는 것이다. 개정판UCLA외로움 사정 도구는 각각 3번씩의 번역과 역번역 과정을 통해 원본 영문도구와 역번역된 영문도구 사이에 의미의 차이가 없다고 판단될 때까지 만들어졌다. 번역과 역번역 과정은 미국에서 석사나 박사학위를 취득한 6명의 한국유학생들에 의해 이루어 졌으며 원본 영문도구와 역번역된 도구사이의 의미의 차이는 본 저자와 미국인 간호학 교수에 의해 사정되었다. 번역된 한국어 외로움 사정도구는 미국의 3개 주에 거주하는 203명의 한국노인들을 대상으로 신뢰도와 타당도 조사가 이루어졌다. 한국어 UCLA외로움 사정도구의 신뢰계수는 .93으로 한국어 도구의 내용이 전반적으로 동질성을 띈다는 것을 알 수 있었다. 이는 Barren등(1992)이 미국인 노인여성을 대상으로 한 연구에서 얻은 신뢰계수 .87보다 높은 것이었다. 한국어 도구의 구성타당도를 조사하기 위해 요인 분석을 실시한 결과 본 도구는 친밀한 주변인, 사회적 주변인, 및 소속감 등의 3개 요인을 가지는 것으로 분석되었다. 구성타당도에 대한 이러한 결과는 미국의 대학생들을 대상으로 한 Austin(1983)의 연구결과와 일치하는 것이었다. 각 요인에 대한 신뢰계수는 .88(제 1요인), .90(제 2요인), .84(제 3요인)로 나타났다. 전반적으로 대상자들은 한국어 도구에 대해 이해를 잘 하는 편이었으나 부정문인 4번 항목, '나는 혼자라고 느끼지 않는다'에 대해서는 응답을 할 때는 다른 항목에 비해 시간이 더 소요되거나 연구보조자에 의한 반복 설명이 필요하기도 하였다.
The objective of this study was to develop models for the predict of the milk properties (fat, protein, SNF, lactose, MUN) of unhomogenized milk using the visible and near-infrared (NIR) spectroscopic technique. A total of 180 milk samples were collected from dairy farms. To determine optimal measurement temperature, the temperatures of the milk samples were kept at three levels ($5^{\circ}C$, $20^{\circ}C$, and $40^{\circ}C$). A spectrophotometer was used to measure the reflectance spectra of the milk samples. Multilinear-regression (MLR) models with stepwise method were developed for the selection of the optimal wavelength. The preprocessing methods were used to minimize the spectroscopic noise, and the partial-least-square (PLS) models were developed to prediction of the milk properties of the unhomogenized milk. The PLS results showed that there was a good correlation between the predicted and measured milk properties of the samples at $40^{\circ}C$ and at 400~2,500 nm. The optimal-wavelength range of fat and protein were 1,600~1,800 nm, and normalization improved the prediction performance. The SNF and lactose were optimized at 1,600~1,900 nm, and the MUN at 600~800 nm. The best preprocessing method for SNF, lactose, and MUN turned out to be smoothing, MSC, and second derivative. The Correlation coefficients between the predicted and measured fat, protein, SNF, lactose, and MUN were 0.98, 0.90, 0.82, 0.75, and 0.61, respectively. The study results indicate that the models can be used to assess milk quality.
Today, due to the increase in global population growth, the international community is discussing solving the food problem. The aquaculture industry is emerging as an alternative to solving the food problem. For the innovative growth of the aquaculture industry, smart fish farms that combine the fourth industrial technology are recently being distributed, and full-cycle digitalization is being promoted. Water quality sensors, which are important in the aquaculture industry, are electrochemical portable sensors that check water quality individually and intermittently, making it impossible to analyze and manage water quality in real time. Recently, optically-based monitoring sensors have been developed and applied, but the reliability of monitoring data cannot be guaranteed because the state information of the water quality sensor is unknown. Therefore, this paper proposes an algorithm representing self-diagnosis status such as Failure, Out of Specification, Maintenance Required, and Check Function based on monitoring data collected by water quality sensors to ensure data reliability.
Journal of The Korean Association For Science Education
/
v.23
no.5
/
pp.470-483
/
2003
This study analyzed the evolutionary content in 13 textbooks developed from the first to the 6th high school biology curriculum, The content analysis of textbooks, which were delineated nine component, was performed on the 80 evolutionary categories, According to the result, the proportion of the total evolutionary content in textbook increased from the textbooks developed by the Ist curriculum to the textbooks developed by the 6th curriculum, but the proportion of 'main narrative' in total evolutionary content was gradually decreased. It also showed that biology curriculum and points of view of textbook writers influenced on the proportion of evolutionary contents. On the whole, the topics of analysed textbooks exhibit insufficient diversity, Any categories- 'group selection', 'gene selection', 'gaps in fossil record', 'co-evolution', 'punctuated equilibrium', 'mosaic evolution', 'place of labor in human evolution', 'human race differentiation', 'criticism of "ontogeny recapitulates phylogeny", and 'human activities affecting evolution' - were not treated and others - 'theory of neutralism', 'theories of major episodes(excepting extinctions) found in the geologic time scale', 'sympatric speciation', 'clinal and area-effect speciation', 'polyploidy and evolution', 'gradualism' and 'evolution and origin of mammals' - were treated very lightly, the most emphasized topic was 'phylogeny in general' and 'formation of precells', 'miscellaneous' in the order of emphasis. 'Theory of natural selection' was lightly treated as just one of evolutionary theory though it should be emphasized as major theme of evolution. Also, the law of recapitulation, of which biologists doubt the validity, was discussed as an evidence of evolution in some textbooks. And the agents of genetic equilibrium disruption like genetic drift and migration were treated as of little importance. On the basis of above result, it was suggested that the textbook writers introduced the more meaningful evolutionary topics focused the theory of natural selection in explanation of evolution and evolution theory.
Proceedings of the Materials Research Society of Korea Conference
/
2011.05a
/
pp.28.1-28.1
/
2011
비휘발성 저항 메모리소자인 ReRAM은 간단한 소자구조와 빠른 동작특성을 나타내며 고집적화에 유리하기 때문에 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항메모리소자 응용에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO 박막은 이성분계 산화물로써 조성비가 간단하고, 빠른 동작특성을 나타내며, 높은 저항 변화율을 보이기 때문에 ReRAM에 응용 가능한 재료로써 기대되고 있다. 또한 가시광선 영역에서 광학적으로 투명한 특성을 보이기 때문에 투명소자 응용에도 많은 연구가 진행되고 있다. 본 연구에서는 Metal/Insulator/Metal (Al/ZnO/Al) 구조의 소자를 제작하여 저항 메모리 특성을 평가하였다. Radio frequency (RF) sputter를 이용하여 ZnO 박막을 합성하고 박막의 결정성을 평가하였으며, resistive switching 효과를 관찰하였다. 합성된 박막 내부의 결정성은 메모리 구동 저항에 영향을 주며, 이를 제어하여 신뢰성있는 메모리 효과를 얻을 수 있었다. 특히 박막의 두께를 제어함으로써 구동전압의 변화를 관찰하였으며 소자에 적합한 두께를 평가할 수 있었다. 또한, ZnO 박막 내의 결함에 따른 on/off 저항의 변화를 관찰할 수 있었다. 제작된 저항 메모리소자는 unipolar 특성을 보였으며, 높은 on/off 저항의 차이를 유지하였다. Scanning electron microscope(SEM)을 통해 합성된 박막의 형태를 평가하였고, X-ray diffraction (XRD) 및 transmission electron microscopy (TEM)을 통해 결정성을 평가하였으며, photoluminescence (PL) spectra 분석을 통하여 박막 내부의 결함 정도를 평가하였다. 제작된 소자의 전기적 특성은 HP-4145를 이용하여 측정하고 비교 분석하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.