• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2010

To maintain the storage quality of agricultural products, temperature uniformity during cold storage, which is affected by fan flow rate and product arrangement, is important. We simulated and validated a CFD (Computational Fluid Dynamics) model that can predict both airflow and temperature distribution in a cold storage environment. Computations were based on a commercial code (FLUENT 6.2) and two turbulence models. The standard k-$\varepsilon$ model and the Reynolds stress model (RSM) were chosen to improve the accuracy of CFD prediction. To obtain comparative data, the temperature distribution and velocity vector profiles were measured in a full-scale cold storage facility and in a 1/5 scale model. The agricultural products domain in cold storage was modeled as porous for economical computation. The RSM prediction showed good agreement with experimental data. In addition, temperature distribution was simulated in the cold storage rooms to estimate the uniformity of temperature distribution using the validated model.

• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.41-50
• /
• 1996

In this study, the theoretical calculation of the air kerma-to-dose equivalent conversion factors was performed with a Monte Carlo N-Particle transport code for the two types of extremity phantom of the ANSI and the KAERI, respectively. Considering the distribution of absorbed dose due to the interaction of homogeneous Parallel broad beam of monoenergetic primary photons in the range between 15keV and 1.5MeV, the air kerma-to-dose equivalent conversion factors based on the kerma approximation were calculated. It is showed that all the theoretical conversion factors of the two types of the extremity phantom for the ANSI and the KAERI agree well with the experimental values of the ANSI N13.32 draft(1995) for each energy within 5.7%, maximum difference ratio, except for 13.6%, difference ratio in the case for the energy of less than 40keV. It is due to uncertainties of experiment occurred in the low X-ray energy range and geometry considered in the MCNP code.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.88-88
• /
• 2002

인공수정 및 수정란기술의 활성화에 따라 소에 있어서 인공수정은 90%이상이 실시되고 있으나, 수정란이식은 수정란의 생산이 안정적이지 않아 활성화에 많은 지장을 초래하고 있다. 이의 원인은 수정란이식에 의한 수태율의 저하가 가장 크며, 수태율 향상을 위하여 수란우에 progesterone, hCG 등의 주사가 실시되고 있다. 그러나 이는 수정란의 착상에 있어서 자궁의 환경을 개선한다고 하나, 착상의 정확한 기전의 구명은 미미한 상태이다. 한편 비장유래 macrophage가 황체를 자극하고 TGF-$\beta$의 생산을 유도하는 것으로 보고되고 있으며, IL-I $\alpha$와 $\beta$에 따라 TGF-$\beta$ 생산에 있어서 약간의 차이를 보이는 것으로 보고되고 있다. 따라서 본 연구는 비장유래 macrophage가 TGF-$\beta$의 생산시 임신관련 Cytokine인 IL-I$\alpha$와의 관계를 조사하기 위하여 실시하였다. 임신 및 비임신 도축 암소의 비장을 채취하여 얼음에 채워 실험실로 운반한 후 비장의 표면을 70%의 알콜로 세척하고, 표피를 벗겨 비장조직을 세절하여 10% FBS+DMEM에 넣어 조직을 눌러 짜면서 조직속의 세포를 분리하였다. 세척한 배양액은 4-5$m\ell$를 100mm 유리 petri dish에 넣고 39$^{\circ}C$, 5% $CO_2$, 95% 공기인 배양기에서 2시간이상 배양하였으며, 배양 후 냉장된 buffer A 용액으로 세척하여 유리 petri dish의 바닥에 부착된 macrophage만을 cell scraper로 분리하였다. 분리한 macrophage는 0.5-1 $\times$ $10^{6}$ cells/$m\ell$가 되게 조정하여, IL-I 을 0.001, 0.01, 0.1 또한 1 ng/$m\ell$를 첨가하여 농도에 따른 효과를 조사하였고, 각각 24, 48, 72, 96 또한 120시간을 배양하여 시간에 의한 효과도 실시하였다. 각 배치구에서 얻어진 배양액은 TGF-$\beta$를 조사하기 전까지 -2$0^{\circ}C$에 동결 보존하였다. TGF-$\beta$의 측정은 TGF-$\beta$ kit(promega, USA)를 이용하여 실시하였으며, 통계학적 분석은 Anova test를 Statview program을 이용하여 분석하였다. 시험의 결과 대조구에 비해 IL-I 첨가구는 2-3배의 TGF-$\beta$생산을 보였으며, 배양시간에 따른 생산은 시간이 지남에 따라 약간 상승하는 경향을 보였으나, 유의적인 차이를 보이지는 않았다. 또한 IL-I의 농도에 따른 생산의 변화는 IL-I의 농도에 따라 약간의 차이를 보였고 유의적인 차이는 인정되지 않았다. 임신 및 비임신의 경우 임신우의 비장 macrophage가 비임신보다는 약간 상승하는 거스로 나타났다. 이상의 결과로 볼 때 IL-I $\alpha$ 는$\beta$subunit 보다 TGF-$\beta$ 생산에 있어서 서로 다른 양상을 보일 것으로 추정되며, IL-I은 macrophage의 직접적인 영향을 주기보다는 황체세포를 매개로 한 자궁에 TGF-$\beta$의 생산을 유도하는 것으로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.76-83
• /
• 2012

In this study, the research examined the effect on FC, WG, RP replacement ratio on the quality improvement of BS mortar using the RA. First of all, the flow value increased as the FC contents increased, and decreased as the WG and RP contents increased. The air contents was reduced as the FC and RP contents increased, but was increased as the WG contents went up While the compressive strength of 1 : 7 mix proportion increased with the increase of the FC and WG contents, it decreased as there was more RP contents. The compressive strength of RP could increase as the mix proportion increased, but the difference depending on the improvement material type and replacement ratio decreased gradually. The absorption deteriorated as the FC and RP contents increased in all the mix proportions, but improved a little when WG was used. Meanwhile, the absorption decreased as the compressive strength improved in all the mix proportions as a correlation, but the order was FC, RP and WG depending on the quality improvement material types. The FC and WG were most favorable in terms of quality improvement as a total analysis, and the RP and WG was most effective in terms of economical efficiency and resource recycling.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.3
• /
• pp.143-150
• /
• 2023

The global outbreak of COVID-19 has underscored the pressing need for robust infection control practices in pulmonary function laboratories (PFL). However, the existing guidelines and regulatory frameworks provided by relevant authorities in the country have revealed certain deficiencies in effectively addressing this significant public health crisis. This study surveyed the infection control regulations, disposable item usage, ventilation facilities, spatial separation, and the configuration of entrance doors in 51 domestic hospital facilities from Oct 1, 2021, to Nov 2, 2021. The survey findings revealed that while there was a relatively satisfactory adherence to airborne, droplet, and contact precautions with adequate awareness and utilization of personal protective equipment, the environmental disinfection practices exhibited a suboptimal performance rate of 39.22% per patient. Depending on the specific survey domains, substantial variations were observed in the utilization of disposable items (81.05%), ventilation systems (45.75%), dedicated testing spaces (80.39%), separation of administrative areas (15.69%), and the installation of automated doors (19.61%). This study not only highlights the paramount importance of infection control in PFLs within domestic medical institutions but also provides foundational data for developing and enhancing standardized guidelines that align with international benchmarks for infection control in these settings.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.114-122
• /
• 2012

For the determination of absorbed dose to water from a linear accelerator photon beams, it needs a exposure calibration factor $N_x$ or air kerma calibration factor $N_k$ of air ionization chamber. We used the exposure calibration factor $N_x$ to find the absorbed dose calibration factors of water in a reference source through the TG-21 and TRS-277 protocol. TG-21 used for determine the absorbed dose in accuracy, but it required complex calculations including the chamber dependent factors. The authors obtained the absorbed dose calibration factor $N_{dw}{^{Co-60}}$ for reduce the complex calculations with unknown $N_{dw}$ only with $N_x$ or $N_k$ calibration factor in a TM31010 (S/N 1055, 1057) ionization chambers. The results showed the uncertainty of calculated $N_{dw}$ of IC-15 which was known the $N_x$ and $N_{dw}$ is within -0.6% in TG-21, but 1.0% in TRS-277. and TM31010 was compared the $N_{dw}$ of SSDL to that of PSDL as shown the 0.4%, -2.8% uncertainty, respectively. The authors experimented with good agreement the calculated $N_{dw}$ is reliable for cross check the discrepancy of the calibration factor with unknown that of TM31010 and IC-15 chamber.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.2
• /
• pp.131-143
• /
• 2015

Purpose : By comparing a CT fusion plan based on MRI with a plan based on only MRI without CT, we intended to study usefulness of a plan based on only MRI. And furthermore, we intended to realize a realtime MR-IGRT by MRI image without CT scan during the course of simulation, treatment planning, and radiation treatment. Materials and Methods : BBB CT (Brilliance Big Bore CT, 16slice, Philips), Viewray MRIdian system (Viewray, USA) were used for CT & MR simulation and Treatment plan of 11 patients (1 Head and Neck, 5 Breast, 1 Lung, 3 Liver, 1 Prostate). When scanning for treatment, Free Breathing was enacted for Head&Neck, Breast, Prostate and Inhalation Breathing Holding for Lung and Liver. Considering the difference of size between CT and Viewray, the patient's position and devices were in the same condition. Using Viewray MRIdian system, two treatment plans were established. The one was CT fusion treatment plan based on MR image. Another was MR treatment plan including electron density that [ICRU 46] recommend for Lung, Air and Bone. For Head&Neck, Breast and Prostate, IMRT was established and for Lung and Liver, Gating treatment plan was established. PTV's Homogeneity Index(HI) and Conformity Index(CI) were use to estimate the treatment plan. And DVH and dose difference of each PTV and OAR were compared to estimate the treatment plan. Results : Between the two treatment plan, each difference of PTV's HI value is 0.089% (Head&Neck), 0.26% (Breast), 0.67% (Lung), 0.2% (Liver), 0.4% (Prostate) and in case of CI, 0.043% (Head&Neck), 0.84% (Breast), 0.68% (Lung), 0.46% (Liver), 0.3% (Prostate). As showed above, it is on Head&Neck that HI and CI's difference value is smallest. Each difference of average dose on PTV is 0.07 Gy (Head&Neck), 0.29 Gy (Breast), 0.18 Gy (Lung), 0.3 Gy (Liver), 0.18 Gy (Prostate). And by percentage, it is 0.06% (Head&Neck), 0.7% (Breast), 0.29% (Lung), 0.69% (Liver), 0.44% (Prostate). Likewise, All is under 1%. In Head&Neck, average dose difference of each OAR is 0.01~0.12 Gy, 0.04~0.06 Gy in Breast, 0.01~0.21 Gy in Lung, 0.06~0.27 Gy in Liver and 0.02~0.23 Gy in Prostate. Conclusion : PTV's HI, CI dose difference on the Treatment plan using MR image is under 1% and OAR's dose difference is maximum 0.89 Gy as heterogeneous tissue increases when comparing with that fused CT image. Besides, It characterizes excellent contrast in soft tissue. So, radiation therapy using only MR image without CT scan is useful in the part like Head&Neck, partial breast and prostate cancer which has a little difference of heterogeneity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.292-298
• /
• 2016

In this research, considering the practical situation of separated placing method for mass concrete structure, an efficient method of controlling the heat of hydration is suggested by comparing between the simulated values and actual measurements conducted with the optimum mix design obtained from the various mix conditions with different types and amount of supplementary cementitious materials(SCMs). As the result of the research, firstly, the optimum mix designs for top and bottom layers were determined by Midas gen as OPC to FA of 85 to 15, and OPC to FA to BS of 50 to 20 to 30, respectively. The concrete mixtures prepared with the mix designs determined from the simulation satisfied the target performance range in slump, air content and compressive strength. Additionally, from temperature measurement for the actual mass concrete placed during spring, the maximum temperature difference between surface and core was about $10^{\circ}C$ with 59 and $49^{\circ}C$ for top and bottom layers, respectively, and 1.4 of cracking index was obtained. Therefore, considering the practical conditions of mass concrete construction, it is considered that the different heat of hydration method using different mix designs with SCMs can be an efficient method for controlling thermal cracking and settling cracking of mass concrete.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.85-90
• /
• 2006

The purpose of this research is to design an imitation boiler similar to the waste heat boiler installed on a plasma melting furnace in order to acquire a capability of a thermal design as to the circulation of heat and the discharge of noxious gas inside a boiler and to improve the efficiency of a waste heat boiler using the CFD (Computation Fluid Dynamics) program. The position of corrosion and the generation of a clinker inside a boiler due to temperature changes, combustion gas flows, and corrosive gases inside a boiler are examined to design the structure of an efficient boiler and recycle energy. As a result of this research, the boiler installed on a plasma melting furnace met the conditions of design by cooling the combustion gases discharged after the second combustion from an exhaust port, originally at 1,200 degrees Celsius, down to around 450 degrees Celsius. On the other hand, the circulation of corrosive gases (SOx and HCL) may lead to the generation of corrosion or a clinker in the upper and lower parts of an exhaust port more easily than any other parts of a boiler. Accordingly, the corrosion on the inside and outside walls of a boiler may result in a shortened lifespan of a boiler and an inability to recycle waste heat in an efficient manner. A prevention against corrosion at high and low temperatures needs to be considered in detail.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1825-1832
• /
• 2000

Column experiments were conducted by using soil columns, to investigate feasibility and efficiency of in-situ ozone enhanced remediation for diesel-contaminated soil. The injection of gaseous ozone into soil column revealed the enhanced decomposition of ozone due to the catalytic reaction between ozone and metal (e.g., Fe, Mn etc.) oxides as evidenced by as much as 25 times shorter half-life of ozone in a sand packed column than in a glass beads packed column. Substantial retardation in the transport of and the consumption of ozone were observed in the diesel contaminated field soil and sand packed columns. After 16 hrs ozonation, 80% of the initial mass of diesel (as diesel range organic) concentration of $800{\pm}50mg/kg$, was removed under the conditions of the flow rate of 50mL/min and $6mg-O_3/min$. Whereas, less than 30% of diesel was removed in the case of air injection. Analysis of the residual TPH(total petroleum hydrocarbon) and selected 8 aliphatics of diesel compounds in the inlet and the outlet of the column confirmed that diesel nonselectively reacted with ozone and then shifted to lower carbon numbered molecules. Water content also was found to be an important parameter in employing ozone to the hydrocarbon-contaminated soil.