• 한국미생물·생명공학회지
• /
• 제22권4호
• /
• pp.423-429
• /
• 1994

A bacterial strain which formed a distinct colony on agar plate containing naphthalene as a vapor phase and grew well ina liquid minimal medium was isolated and identified as Alcaligenes sp. A111. Optimum temperature and pH for the cultivation of Alcaligenes sp. A111 were 30$\cir$C and 7.0, respectively. Cell growth increased dramatically from 12 hours after inoculation and revealed a stationary phase at about 48 hours. Relative growth rate ($\mu$')increased hyperbolically depending on the conceration of naphthalene up to 500 ppm and reached to the maximum value pf 2.8/day, but $\mu$' didn't change within a range of 500~4000 ppm naphthalene. NH$_{4}$Cl or NH$_{4}$NO$_{3}$ was preferrd as a nitrogen source and a P : N ratio by weight og 6 : 1 was favorable to cell growth. Alcaligenes sp. A111 utilized the intermediates of degradation of naphthalene and showed tolerance to benzene, toluene, and octane. therefore, it is suggested that Alcaligenes sp. A111 could be effectively used for the biological treatment of wastewater containing naphthalene in the presence of some aromatic compounds.

• 콘크리트학회지
• /
• 제6권4호
• /
• pp.85-91
• /
• 1994

앞 선 연구에서는 나프탈렌과 나프톨을 혼합 또는 단독으로 술폰화하고 이들을 포름알데히드와 반응시켜 축합물을 합성하였다. 본 연구에서는 이들 축합물의 시멘트 혼화제로서의 성능을 조사하기 위해 시멘트 모르터의 플로우 및 강도 시험을 행하였다. 플로우 시험의 결과, 나프톨 단독 축합물(TSC) 및 나프탈렌 공축합물(NT5)을 첨가한 시멘트 모르터의 플로우 값은 합성 나프탈렌 단독 축합물(NSS)을 첨가한 시멘트 모르텅의 플로우값 보다 큰 값을 나타냈다. 28일 압축 강도 시험에서는 나프탈렌 공축합물(NT5)를 첨가한 경화시멘트 모르터가 나프탈렌(NSS)또는 나프톨 단독 축합물(TSC)을 첨가한 경우보다 약 10% 높은 강도를 나타냈다. 이상의 결과로부터, 본 연구에서 사용한 나프탈렌계 고성능감수제(NT5, TSC)는 콘크리트용의 고성능 감수제로서 크게 기대되어 진다.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.317-327
• /
• 2009

In this study DMT(Dimethylterephthalate), NDC(Dimethyl-2, 6-Naphthalene Dicarboxylate) were used to synthesize polyester polyol which shows enhanced storage stability, improved flame retardancy, and good compressive strength. If DMT and NDC react respectively with DEG(Diethylene Glycol) which is kind of linear diol, the obtained polyester polyols tend to crystallize easily after the reaction. In case of DMT, PA(Phthalic Anhydride) which has asymmetric structure was introduced to retard the crystallization. In case of NDC, DPG(Dipropylene Glycol) which has an methyl side chain was introduced to prevent the crystallization. It was found that to introduce DPG was much more effective method to prevent the crystallization than PA. NDC and DMT were reacted together with DPG for various compositions of NDC:DMT(8:2, 6:4, 4:6 mol ratio). The obtained NDC-DMT-DPG based polyester polyol showed improved flame retardancy, and good compressive strength with increasing the content of NDC.

• 한국자원식물학회지
• /
• 제22권1호
• /
• pp.26-30
• /
• 2009

본 연구는 속리산국립공원 내 쌍곡계곡에 분포하는 식물상을 조사하기 위해 수행되었고 조사기간은 2006년 3월부터 2007년 6월까지 조사하였다. 식물상을 조사한 결과, 88과 242속 342종 52변종 7품종 등 총 401분류군이 확인되었다. 한국특산식물은 개비자나무, 키버들, 개족도리, 할미밀망, 민산초나무, 청괴불나무, 병꽃나무, 분취 등 총 8분류군이 조사되었다. 환경부 지정 멸종위기식물은 망개나무 등 1분류군이며, 산림청 지정 희귀식물은 개족도리, 고란초, 망개나무, 백작약, 태백제비꽃, 꼬리진달래, 말나리 등 7분류군이 조사되었다. 이들의 보전을 위해서는 향후 희귀식물에 대한 구체적인 보전방안과 번식방법 등이 논의되어야 할 것으로 판단된다. 자원식물은 관상용 식물 220분류군, 식용 식물 239분류군, 약용 식물 281분류군, 기타용 식물 206분류군으로 나타났다. 귀화식물은 오리새, 소리쟁이, 취명아주, 아까시나무, 붉은토끼풀, 토끼풀, 큰달맞이꽃, 비짜루국화, 붉은서나물, 개망초, 망초, 뚱딴지, 서양민들레 등 13분류군이 관찰되었으며, 귀화율은 약 3.24%, 자연파괴도는 약 4.53%로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.313-316
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.943-946
• /
• 2005

An effective spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR) using molten naphthalene as a diluent has been studied. A red complex of palladium with PAR is formed at 90 ${^{\circ}C}$. In the range of pH 9.0-11.0, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in $CHCl_3$ to be determined spectrophotometrically at 520 nm against the reagent blank. Beer’s law is obeyed over the concentration range of 0.1-2 ${\mu}g{\cdot}mL^{-1}$. The molar absorptivity and Sandell’s sensitivity are 8.0 ${\times}\;10^5\;L{\cdot}mol^{-1}{\cdot}cm^{-}1\;and\;0.49\;{\mu}g{\cdot}cm^{-2}$ respectively. From the results of tolerance limits, it was found that there was no interferences were observed for most of the ions examined and those somewhat high interferences by Co(II), Fe(II) and Bi(III) could be effectively masked by EDTA.

• Advances in environmental research
• /
• 제1권3호
• /
• pp.201-210
• /
• 2012

The bioavailability of sorbed organic contaminants is one of the most important factors used to determine their fate in the environment. This study was conducted to evaluate the bioavailability of slow-desorbable naphthalene in soils. An air sparging system was utilized to remove dissolved (or desorbed) naphthalene continuously and to limit the bacterial utilization of dissolved naphthalene. A biological air sparging system (air sparging system with bacteria) was developed to evaluate the bioavailability of the slow-desorption fraction in soils. Three different strains (Pseudomonas putida G7, Pseudomonas sp. CZ6 and Burkholderia sp. KM1) and two soils were used. Slow-desorbable naphthalene continuously decreased under air sparging; however, a greater decrease was observed in response to the biological air sparging system. Enhanced bioavailability was not observed in the Jangseong soil. Overall, the results of this study suggests that the removal rate of slow-desorbable contaminants may be enhanced by inoculation of degrading bacteria into an air sparging system during the remediation of contaminated soils. However, the enhanced bioavailability was found to depend more on the soil properties than the bacterial characteristics.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1593-1596
• /
• 2006

The polymeric membrane electrodes based on N,N'-bis-pyridin-2-ylmethylene-naphthalene-1,8-diamine as an ion carrier were prepared and tested for the copper-ion selective electrode. The membrane has a linear dynamic range between $10^{-6}$ and $10^{-2}$ M with a Nernstian slope of 29.6 mV per decade, and its detection limit was $10^{-5.62}$M. The potentiometric response is independent of the pH range of 3-5. The proposed electrode showed good selectivity and response for $Cu^{2+}$ over a wide variety of other metal ions in pH 4.0 buffer solutions.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.37-44
• /
• 2005

새로운 형태의 액정성 폴리우레탄을 2,6-bis(${\omega}$-hydroxyalkoxy)naphthalene (BHNm; m= 5, 6, 8, 11)과 2,5-tolylene diisocyanate 또는 1,4-phenylene diisocyanate의 중부가 반응에 의해 합성하였다. 폴리우레탄의 고유 점성도는 0.28-0.43 dL/g 였다. 열적 성질은 DSC 및 편광현미경에 의해 측정되었다. 단량체 BHNm과 메틸치환기를 가진 2,5-tolylene diisocyanate에 의해 합성된 폴리우레탄은 모두 단방성 액정성을 나타내었다. 그러나 BHNm와 1,4-phenylene diisocyanate를 합성한 폴리우레탄에서는 DSC와 편광현미경으로 조사 결과 전혀 액정성을 나타내지 않았다.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.89-94
• /
• 2012

Pyrolysis/gasification technology utilizes an energy conversion technique from various waste resources, such as biomass, solid waste, sewage sludge, and etc. to generating a syngas (synthesis gas). However, one of the major problems for the pyrolysis gasification is the presence of tar in the product gas. The tar produced might cause damages and operating problems on the facility. In this study, a gliding arc plasma reformer was developed to solve the previously acknowledged issues. An experiment was conducted using surrogate benzene and naphthalene, which are generated during the pyrolysis and/or gasification, as the representative tar substance. To identify the characteristics of the influential parameters of tar decomposition, tests were performed on the steam feed amount (steam/carbon ratio), input discharge power (specific energy input, SEI), total feed gas amount and the input tar concentration. In benzene, the optimal operating conditions of the gliding arc plasma 2 in steam to carbon (S/C) ratio, 0.98 $kWh/m^3$ in SEI, 14 L/min in total gas feed rate and 3.6% in benzene concentration. In naphthalene, 2.5 in S/C ratio, 1 $kWh/m^3$ in SEI, 18.4 L/min in total gas feed rate and 1% in naphthalene concentration. The benzene decomposition efficiency was 95%, and the energy efficiency was 120 g/kWh. The naphthalene decomposition efficiency was 79%, and the energy yield was 68 g/kWh.