• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.63-76
• /
• 1997

To investigate the engineering characteristics of crushed rockfill material, the large-scaled triaxial tests have been carried out, The rpckfill is made from the greywacke, and the 3 parallel gradations with different maximum particle size(dmu=38.1mm, 25.4mm and 19.1mm) were designed for the test. The dimension of the specimen is 300mm in diameter and 600mm in height, and the applied confining stress varied from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$. The test results show that the influence of the maximum particle size on the stress -strain r$51.6^{\circ}\; to\; 40.5^{\circ}$ when the confining stress increases from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$ The hyperbolic parameter values estimated from the test result for rockfill are much different from the recommended values by Duncan et. at(1980) for GW and GP material, especially in the $\phi$ ad K-values.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.59-66
• /
• 1989

This paper is concerned with formaldehyde release from durable press finished rayon fabrics. $100\%$ rayon fabrics were treated with 3 kinds of commercial N-methylol crosslinking agents using a pad-dry cure technique. Aqueous extractions of fabric samples were carried out at $40^{\circ}C$ under pH's of 4, 7, 10. Formaldehyde release was evaluated for the types of resins, catalyst concentrations and extraction conditions. Results indicated that the higher concentration of catalyst leads to the more fixation of resin on the fabric. Total formaldehyde released to the extract was decreased as the catalyst concentration increased. For the resin types, the amount of formaldehyde released was in the order of DMU>MDMDHEU>DMDHEU. Free formaldehyde content in the extract was in the order of pH10>pH4>pH7. This result proved that resins are least resistant to alkaline hydrolysis and the N-C bond cleavage under alkaline condition. Under acidic condition, however, N-methylol formaldehyde was accumulated before the release of free formaldehyde. This suggested the C·0 bond cleavalge to form carbonium - immonim intermediate.

• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.463-474
• /
• 2010

In this study, we evaluate the efficiency of Construction Industry using Data Envelopment Analysis(DEA). Since the Construction Industry has been traditionally operated through competition, it is important to measure the efficiency. In this paper, we empirically analyze the Efficiency of the 50 Korean Construction Industry. In detail, we used the scale of efficiency in order that efficiency cannot be affected by the total technical efficiency of each company and the scale of DMU by applying CCR or BBC model. Also, we analyzed the changes of measurement DEA model score. we adopted the basic DEA, RTS Region and MPSS(Most Productive Scale Size) method which are combined with efficiency measurement model in order to analyze the operational status. Furthermore, by complementing the shortfalls of the scale efficiency value of the DEA Model, RTS Region Model can be recommended to be appropriate in the evaluation of ideal input/output Quantity. In particular, input variables are total assets, construction capacity, the technical staff and output variables are sales volume, operating income. The result of RTS Region and MPSS shows that 9 DMUs of the efficiency frontier in the Construction Industry are analyzed to be relatively efficient DMUs, and 41 DMUs are analyzed to be inefficient DMUs, and finally inefficient DMUs are separated with Region 1 and Region 6.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.165-174
• /
• 2010

DEA converts multiple inputs and outputs of a decision unit into a single measure of performance, generally mentioned as relative efficiency. DEA has been applied successfully as a performance evaluation tool in many fields including manufacturing, banks, pharmacies, and hospitals to name a few. This paper applies the input-oriented DEA model, DEA/Window analysis, and Malmquist indices to the 9 regions in Korea to measure the efficiency and productivity. The empirical results show the following findings. First, the super efficiency indicate that efficiency of Group 2 is greater than Group 1. Second, Malmquist indices show that productivity of Group 2 is less than Group 1. Third, DEA/Window of Group2 show that Chungnam is most stable, while Jeonnam is most unstable.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.452-459
• /
• 2015

It is important to use bench test results in the design process of anti-rolling tanks. Traditional bench tester is usually designed to perform only roll motions about a fixed axis and relatively small so that the viscous effects may not be neglected. Novel bench tester which could adjust the motion center to realize the coupled motion of sway and roll has been devised and manufactured therefore, large scaled bench tester could be utilized for designing the passive anti-rolling tanks. The time history of the reference signal from the rotation sensor of the bench tester have been recorded and processed to determine the phase angle to derive the Response Amplitude Operator(RAO) of the stabilized ship. The breadth of ART tank model should be large up to 2 m to diminish viscous scale effect and the vertical position of the tank can be varied with the ship's center of motion. The periods and the amplitude of roll motion can be varied from 1.5 sec to 5 sec and up to ±20°, respectively. The components of the tester was expressed in three dimensional digital mockup (DMU) and assembled together in the CAD space. The final configuration of the bench tester has been determined by confirming the smooth operation of the moving parts without interference through the animation in CAD space. New analytic logic are introduced for the determination of hydrodynamic moment and phase difference due to fluid motion in ART and verified through the test. The developed bench tester is believed to be effective and accurate for the verification of stabilization effect of ART taking into the consideration of the sway effect in the design stage.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.188-204
• /
• 1977

The studies on the saponins of Korean ginseng, Panax ginseng C.A. Meyer, were performed according to the cultivating locations, sampling seasons, plant parts, and growing stages. The changes in saponin content in the course of manufacturing Red ginseng and Ginseng extract were observed. In this paper, a new method for the determination of the total and the individual saponin glucosides was proposed and applied to the samples under study. The method employing Digital Densitorol DMU-33C (Toyo electric Co., Japan) followed the separation of the saponins by means of a preparative thin layer chromatography. The saponin contents and their fractional distribution were summarized as follows: 1. The average concentrations(% plant dry weight) of semi-purified saponins in the roots of Korean ginseng planted in the various locations were 5.0%(Keumsan), 6.0% (Kimpo), and 5.4% (Pocheon), respectively. 2. There were 3.3% saponins in White ginseng(Rhizome) and 12.7% saponins in Ginseng tail (Fibrous root). 3. Regarding the year of growth, the contents of saponins were 90.3mg (2-year-old ginseng), 254.4mg (3-year-old ginseng), 404.2mg (4-year-old ginseng). 999.6mg (5-year-old ginseng), and 1377.1mg (6-year-old ginseng) respectively, and the saponin factions containing panaxatriol as an aglycone increased. 4. Thin layer chromatography revealed that Red ginseng yielded many saponins which Shibata et al. designated as $ginsenoside-Rb_1$ (22.1%), $-Rb_2(15.4%)$, -Rc(12.6%), -Re (15.7%), and $-Rg_1$, (9.3%). 5. 29.9% of crude saponins were isolated from ethanolic extract of Panax ginseng fibrous root and their extraction yield was 94.2% of fibrous root saponin.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.159-168
• /
• 2020

This study aims to utilize DEA, analyze the efficiency of Korean coffee franchises, look into the factors that affect efficiency, and improve the efficiency of Korean coffee franchises. The main results of this study are as follows. First, according to CCR model standards, there are a total of 9 efficient coffee franchises and according to BCC model standards, there are a total of 12 efficient coffee franchises. A total of three of the inefficient DMUs were found to have a value of 1 for BCC, while the other 25 were found to be inefficient for both technology and scale. Second, of 28 franchises, 11 were analyzed to be decreasing return to scale and through future increased investments of optimum levels, business performance can be improved and efficiency can be enhanced. Analysis showed that 9 franchises appeared as CRS and it is most ideal to maintain the yield of future output elements at current levels and the work efficiency of 8 franchises in increasing returns to scale states expands as production scales increase according to specialization and role division and yield can relatively improve a lot. Third, the analysis of factors affecting the efficiency of franchises through the Tobit regression analysis showed that the number of franchises and operating periods had a positive (+) effect on efficiency. Based on this study, the efficiency of coffee franchises should be analyzed to establish strategies to maximize efficiency. Based on this study, the efficiency of coffee franchises should be analyzed to establish strategies to maximize efficiency.