• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.55-61
• /
• 1998

Organic light emitting devices from a single layer thin film with a hole transport polymer, poly(N-vinylcarbazole) (PVK) doped with 2-(4-bi phenyl)-5-(4-t-butyl-phenyl) -1,3,4-oxadiazole (Bu-PBD) as electron transporting molecules and Coumurine 6(C6), 1,1,4,4-tetraphenyl-1,3-butadiene (TPB), Rhodamine B as a emitter dye were fabricated. The sing1e layer structure and the use of soluble materials simplify the fabrication of devices by spin coating technique. The active layer consists of one polymer layer that is simply sandwiched between two electrodes, indium-tin oxide (ITO), and aluminum. In this structure, electron and hole inject from the electrodes to the PVK : Bu-PBD active layer. Respectively, Blue, green and orange colored emission spectrum by the use of TPB, C6, Rhodamine B dye emitted at 481nm, 500nm and 585nm were achieved during applied voltages. PVK materials can be useful as the host polymer to be molecularly doped with other organic dyes of the different luminescence colors. And EL color can be tuned to the full visible wavelength.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.760-764
• /
• 2011

A new series of 1-(5-(2-tolyloxyquinoline-3-yl)-2-(pyridine-4-yl)-1,3,4-oxidiazol-3(2H)-yl)ethanones were synthesized from cyclisation of N'-((2-(p-tolyloxy)quinoline-3-yl)methylene) isonitonohydrazide in acetic unhydride at reflux condition for 3-4 hr. The structures of the new compounds were confirmed by elemental analyses as well as IR, 1H NMR and mass spectral data. All the synthesized compounds were screened for their antibacterial activities against various bacterial strains. Several of these compounds showed potential antibacterial activity.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.97-102
• /
• 1998

Organic thin film EL devices using PPV(poly (p-phenylenevinylene)) as emitter were fabricated on various conditions and structures, their electro-optical properties were estimated. Fabricated EL devices had structures of single layer(ITO(indium tin oxide)/PPV/Mg), double layer(ITO/PVK(poly(N-vinylcarbazole))/PPV/Mg and ITO/PPV/Polymer matrix + PBD/Mg) and three layer (ITO/PVK/PPV/PS(polystyrene)+PBD(butyl-2-(4-bipheny])-5-(4-tert-butylphenyl-1,3,4-oxadiazole))/Mg), their electro-optical characteristics were compared with each other. In structure of double layer (ITO/PPV /Polymer matrix + PBD/Mg), the used polymer-matrices were PMMA(poly(methyl methacrylate), PC(polycarbonate), PS and MCH(side chain liquid crystalline homopolymer). When PS as a hole transport layer was used, the luminance characteristics on concentration of PBD was obtained. In results, current-voltage-luminance curves of fabricated devices had characteristics of tunneling effect and the device showed a stable light emitting.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3701-3705
• /
• 2012

A simple method has been developed for four-component synthesis of disubstituted 1,3,4-oxadiazoles using (N-isocyanimino)triphenylphosphorane, a primary amine, a carboxylic acid and biacetyl in $CH_2Cl_2$ by the Ugi-4CR/aza-Wittig sequence at room temperature in excellent yields.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.221-226
• /
• 2013

A series of some novel 2-[5-(substituted phenyl)-[1,3,4]oxadiazol-2-yl]-benzoxazoles were synthesized by using benzoxazole-2-carboxylic acid on reaction with thionyl chloride in presence of ethanol solvent at room temperature gave benzoxazole-2-carbonyl chloride, which is turned into benzoxazole-2-carboxylic acid hydrazide on reaction with hydrazine hydrate in ethanol solvent under reflux. The subsequent treatment of benzoxazole-2-carboxylic acid hydrazide with an appropriate aromatic carboxylic acid in presence of polyphosparic acid under reflux afforded the title compounds. The chemical structures of the newly synthesized compounds were elucidated by their IR, $^1H$ NMR and Mass spectral data analysis. Further the compounds are used to find out their ability towards anti microbial and nematicidal activity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.784-787
• /
• 2002

Oganic light emitting diodes (OLEDs) using PBD(2-(4-biphenylyl)-5-(4-tert-butylpheny)-1,3,4oxadiazole) as a hole blocking layer were fabricated and their device performances were investigated. The devices have a structure of glass substrate ${\setminus}$ indium tin oxide (ITO) ${\setminus}$ TPD(HTL)${\setminus}$PBD,BCP(HBL)${\setminus}$Alq3(EIL)${\setminus}$Mg:Ag(cathode). In this work Bathocuproine(BCP:2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline) and PBD which were previously known as a good ETL material were used as a HBL. By employing HBL, the luminance and quantum efficiency of OLEDs could be improved due to the increase of recombination probability of electrons and holes.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.52-63
• /
• 1998

A novel quinolineoxadiazoles, substituted the carboxylic acid group with 1,2,4-oxadiazole radicle, of KSC-16960 and related compounds were evaluated to examine the herbicidal activity, crop injury and residual effect of after-vegetable crops compared with those of quinclorac (3,7-dichloro-8-quinolinecarboxylic acid), of which use is now banned because of its residual activity to some succeeding vegetable crops. KSC-16960 showed 2- and 3-leaf stages of barnyardgrasses effectively controlled by more than 95 and 90%, respectively, at a rate of 6.25 g/ha. The dose of KSC-16960 controlled 4- and 5-leaf stages of barnyardgrasses by more than 90% were found to be 50 g and 100 g/ha, respectively. The selectivity of KSC-16960 between direct-seeded rice and barnyardgrass was approximately 2-fold higher than that of quinclorac when they were treated to the soil. The selectivity indices of KSC-16960 and of quinclorac between 1-leaf stage of direct seeded rice and 5-leaf stage of barnyardgrass were 44 and 23, respectively, and those between 1-leaf stage of direct seeded rice and 4-leaf stage of barnyardgrass were almost 2-fold higher. Application of KSC-16960 with bentazone exhibited an additive controlling effect on several weed species, but that of quinclorac exhibited an antagonistic effect. With pyrazosulfuron-ethyl, on the other hand, both application of KSC-16960 and quinclorac showed additive interactions. Under a greenhouse condition, the residual activity of KSC-16960 to succeeding tomato plants was approximately 4-fold lower compared to that of quinclorac. KSC-16960 could be substituted for quinclorac, if it will be made some more improvement for reducing residual activity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.491-495
• /
• 2017

We investigated solution-processed indium-zinc oxide (IZO) thin-film transistors (TFTs) by inserting a 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) buffer layer. This buffer layer efficiently tuned the energy level between the semiconducting oxide channel and metal electrode by increasing charge extraction, thereby enhancing the overall device performance: the IZO TFT with embedded PBD layer (thickness: 5 nm; width: $2,000{\mu}m$; length: $200{\mu}m$) exhibited a field-effect mobility of $1.31cm^2V^{-1}s^{-1}$, threshold voltage of 0.12 V, subthreshold swing of $0.87V\;decade^{-1}$, and on/off current ratio of $9.28{\times}10^5$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.249-252
• /
• 1997

Electroluminescence(EL) devices based on organic thin layers have attracted lot of interests because of their possible application as large-area display-emitting display. One of the problems of such devices is lifetime of the cell, where the degradation of the cell is partially due to the crystalliyzation of organic layers. In large part, this problem can be solved by using a multilayer device structure prepared by vapor deposition technique. In this study, blue light-emitting multilayer organic electroluminescence devices were fabricated vsing Poly (9-vinylcarbaEole) (PVK) and 2- (4-tert-butylphenyl)-5-(4$^{#}$-bis-phenyl) 1,3,4-oxadiazole (PBO) as hole trasport and electron transport material, respectively, where trim(8-hyd roxyquinolinate) aluminum (Al $q_3$) was used as a luminescenct material. A cell structure of glass sub- strate/indume-tin-oxide(ITO)/PCK/Al $q_3$/PBD/Mg:In was employed. Blue emission peak at 510nm was observed with this cell structure.e.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1410-1412
• /
• 2005

We present that the electroluminescence (EL) efficiency can be improved by doping an electron transport layer (ETL) with organic materials which can make electron current increase. The electron transport layer of aluminum tris(8 -hydroxyquinoline) (Alq3) is doped with 2-(4-Biphenylyl)-5-(4-tertbutylphenyl)- 1,3,4-oxadiazole) (butyl-PBD) to enhance the electron mobility of the ETL. The higher quantum efficiency of device having ETL using Alq3 doped with butyl-PBD can be attributed to the improved electron and hole balance.