• Title/Summary/Keyword: 1,2-Ketone

Search Result 326, Processing Time 0.026 seconds

Emission Characteristics of VOCs Distributions in Semiconductor Workplace (반도체 작업환경의 VOCs 농도분포 특성)

  • Lee, Jeong Joo
    • Journal of the Korean Society of Urban Environment
    • /
    • v.18 no.4
    • /
    • pp.503-509
    • /
    • 2018
  • In this study, a Proton-Transfer Reaction-Time-of-Flight Mass spectrometer (PTR-TOF-MS) was used for the continuous monitoring of Volatile Organic Compounds (VOCs) emitted from semiconductor workplace such as photolithography (PHOTO), flat panel display (FPD), organic light emitting diode (OLED), etching (WET) process. The averaged VOCs mixing ratio in the such workplace, PHOTO was 6.5 ppm, FPH was 6.4 ppm, WET was 2.0 ppm and OLED was 1.3 ppm, respectively. The abundance of VOCs in the workplace were methyl ethyl ketone (MEK) with 2.8 ppm (69%) and acetaldehyde with 0.5 ppm (13.2%). Depending on the semiconductor process characteristics, various VOCs have been observed in the workplace. The VOCs mixing ratio are lower than the workplace regulation standard (TWA), it is necessary to continuously monitor and effectively manage these VOCs.

Distribution Characteristics and Source Estimation of Volatile Organic Compounds in the Ambient Air of Industrial Complex in Gwangju (광주지역 산업단지 대기 중 휘발성유기화합물 분포 특성 및 배출원 추정)

  • Min-Jin Kim;Ok-Hyun Park;Yoon-Cheol Yang;Jin-Hwan Park;Ji-Yong Yu;Hee-Yun Jung;Gwang-Yeob Seo;Jong-Min Kim
    • Journal of Environmental Science International
    • /
    • v.32 no.6
    • /
    • pp.403-417
    • /
    • 2023
  • In this study, we investigated the characteristics of Volatile Organic Compounds(VOCs) emission from painting and printing facilities in the Pyeongdong industrial complex in Gwangju. In addition, the objective was to understand the distribution characteristics of VOCs in the ambient air in industrial complexes affected by painting and printing facilities. The painting facility mainly emitted toluene, acetone, butyl acetate, 4-methyl-2-pentanone, ethyl acetate, 1-butanol, methyl ethyl ketone, m,p-xylene, o-xylene, 4-ethyltoluene, ethylbenzene, 3-ethyltoluene, and 1,2,4-trimethylbenzene. The main emission components in printing facilities were methyl ketone, ethyl acetate, acetone, 2-propanol, toluene, heptane, and butyl acetate. Ethyl acetate, toluene, 2-butanone, acetone, butyl acetate, 2-propanol, xylenes, and 4-methyl-2-pentanone were detected in the ambient air of the Pyeongdong industrial complex, consistent with the VOCs emitted by painting and printing facilities. The average concentration of seasonal TVOCs followed an order of winter > fall > spring > summer, whereas the concentrations of daytime and nighttime TVOCs were generally higher at night than those during the day, and the wind speed was greater during the day than it was at night. Based on a factor analysis of VOCs in the ambient air of Pyeongdong industrial complex, it is considered that organic solvents used in coating, printing, and electronics manufacturing facilities, as well as diesel vehicle emissions played a major role.

THE EFFECT OF HYDROLYZED ALKYLKETENE DIMER ON SIZING DEVELOPMENT

  • Seo, Won-Sung;Shin, Jong-Ho;Cho, Nam-Seok
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 1999.11b
    • /
    • pp.50-55
    • /
    • 1999
  • Sizing development of AKD-sized paper by beta-ketoester formation has been debated until recent years because of absence of its obvious and direct spectroscopic evidence. In this study, reaction between AKD and cellulose was investigated to disclose the possibility of beta-ketoester formation between two components under no catalyzed neutral condition. In absence of water, AKD reacted with cellulose to form beta-ketoester linkage under no catalyzed neutral condition, while, in presence of water, most of AKD was hydrolyzed to a dialkyl ketone or beta-ketoacid. Therefore, the main mechanism of AKD sizing would not be the formation of beta-ketoester between AKD and cellulose in the papermaking process. It could be suggested that the sizing development of AKD-sized paper is obtained by next two mechanisms: 1) formation of a thin-layer of AKD on the fiber surface through melting and spreading of AKD emulsion particles by heat, and 2) the formation of ketone by the hydrolysis of AKD during drying and storage of AKD-sized papers.

Comparative Biochemical Properties of Proteinases from the Hepatopancreas of Shrimp. -II. Purification of Trypsin from the Hepatopancreas of Penaeus orientalis-

  • Oh Eun-Sil;Kim Doo-Sang;Jung Kyoo-Jin;Pyeun Jae-Hyeung;Heu Min-Soo;Kim Hyeung-Rak
    • Fisheries and Aquatic Sciences
    • /
    • v.1 no.2
    • /
    • pp.209-215
    • /
    • 1998
  • Trypsin-like enzyme was purified from shrimp hepatopancreas through Q-Sepharose ionic exchange, benzamidine Sepharose-6B affinity, and Superdex 75 gel chromatography. Purity of trypsin-like enzyme was increased 69-fold with $44\%$ yield. The enzyme consisted of a single polypeptide chain with a molecular weight (M.W.) of 32 kDa judged by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). The enzyme was completely inactivated by serine enzyme inhibitors such as soybean trypsin inhibitor (SBTI), tosyl-L­lysine chloromethyl ketone (TLCK), and leupeptin. However, the enzyme was not affected by tosyl-L-phenylalanine chloromethyl ketone (TPCK) which is a chymotrypsin specific inhibitor. The enzyme had no activity against benzoyl-tyrosine ethyl ester (BTEE) which is a chymotrypsin specific substrate. The enzyme showed high activity on the carboxyl terminal of Phe, Tyr. Glu, Arg, and Asp. However. no activity was detected against the carboxyl terminal of Pro, Trp, Cys, Gly, Val, and Ala.

  • PDF

The Effect of sGO Content in sPEEK/sGO Composite Membrane for Unitized Regenerative Fuel Cell (일체형 재생연료전지 적용을 위한 sGO 함량 변화에 따른 sGO/sPEEK 복합막의 특성 평가)

  • Jung, Ho-Young;Kim, Min-Woo;Lim, Ji-Hun;Choi, Jin H.;Roh, Sung-Hee
    • KEPCO Journal on Electric Power and Energy
    • /
    • v.2 no.1
    • /
    • pp.127-131
    • /
    • 2016
  • Polymer electrolyte membrane for unitized regenerative fuel cells requires high proton conductivity, high dimensional stability, low permeability, and low cost. However, DuPont's Nafion which is a commercial polymer electrolyte membrane has high permeability, high cost, and decreasing proton conductivity and dimensional stability over $80^{\circ}C$. To address these problems, sulfonated poly ether ether ketone (sPEEK) which is a low cost hydrocarbon polymer is selected as matrix polymer for the preparation of polymer electrolyte membrane. In addition, composite membrane with improved proton conductivity and dimensional stability is prepared by introducing sulfonated graphene oxide (sGO). The fundamental properties of polymer electrolyte membranes are analyzed by investigating membrane's water content, dimensional stability, proton conductivity, and morphology. The cell test is conducted to consider the possibility of application of sPEEK/sGO composite membrane for an unitized regenerative fuel cell.

Effects of Broth pH and Chilling Storage on the Changes in Volatile Profiles of Boiled Chicken Flesh

  • Pattarabhorn Pakaweerachat;Teerin Chysirichote
    • Food Science of Animal Resources
    • /
    • v.44 no.5
    • /
    • pp.1096-1107
    • /
    • 2024
  • This study investigated the changes in volatile compounds in chicken flesh after boiling at various pHs (6.0-9.0) and after chilling storage (4.0±1.0℃) for 7 d. The volatile compounds were assessed qualitatively and quantitatively by using a headspace gas chromatography-mass spectrometry analysis. Twenty-one volatile compounds were discovered and categorized as amine, aldehyde, alcohol, ketone, acid, and furan. One type of amine, (2-aziridinylethyl) amine, was the most prevalent volatile component, followed by aldehyde, ketone, aldehyde, acid, ester, and furan. The results showed that the quantity and quality of the volatile compounds were influenced by a pH of the boiling medium. Additionally, the types and volatile profiles of the chicken were altered during chilling. In particular, in the chicken that was boiled at a pH of 8.0, the hexanal (an aldehyde) content increased the most after 7 d of chilling. Moreover, various alcohols formed after the 7 d of chilling of the chicken that was boiled at pHs of 8.0 and 9.0. Because of the oxidation and degradation of fat and proteins, the most altering volatile compounds were the reducing amines and the increasing aldehydes.

Comparative molecular field analysis(CoMFA) on the fungicidal activity of 2-thienyl and 2-furyl substituents in bis-aromatic ${\alpha},{\beta}$-unsaturated ketone derivatives (비스 방향족 ${\alpha},{\beta}$ 불포화 케톤 유도체 중 2-thienyl 및 2-furyl 치환체의 항균활성에 관한 비교분자장 분석(CoMFA))

  • Sung, Nack-Do;Yu, Seong-Jae;Lim, Chi-Hwan;Akamatsu, Miki
    • The Korean Journal of Pesticide Science
    • /
    • v.2 no.2
    • /
    • pp.16-21
    • /
    • 1998
  • Bis-aromatic ${\alpha},{\beta}$-unsaturated ketone derivatives represented as substrate(S) were synthesized and their fungicidal activities in vivo against rice blast(Pyricularia oryzae) and tomato leaf blight(Phytophthora infestans) were examined with the quantitative structure activity relationships(QSAR) using 3D QSAR, comparative molecular field analysis (CoMFA). The 3D CoMFA results and those of 2D QSAR were compared and the results reveal that both results show similar trend. The two important factors, steric and electronic, contribute toward the activity. We assumed that fungicidal activity for rice blast was greatly improved by increasing with positive charge of ${\beta}$-carbon and introduction of bulky derivatives into $R_{2}$ group, while that for tomato leaf blight was improved by decreasing the positive charge of ${\beta}$-carbon and introduction of smaller molecular derivative into $R_{2}$ group. The CoMFA analyses clearly demonstrate its potential in unraveling the steric and electronic features of the molecules through contour maps.

  • PDF

Effect of Photoinitiators on Adhesion Properties of 2-EHA/AA PSA (광개시제의 종류에 따른 2-EHA/AA 점착제의 접착특성)

  • Yoon, Hong-Beom;Kim, Ho-Gyum;Min, Kyung-Eun
    • Polymer(Korea)
    • /
    • v.38 no.4
    • /
    • pp.491-495
    • /
    • 2014
  • Pressure sensitive adhesive (PSA) based on 2-ethylhexyl acrylate (2-EHA)/acrylic acid (AA) copolymer was synthesized using different photoinitiators. Results showed that PSA with Irgacure$^{(R)}$651 (benzyldimethylketal) and Irgacure$^{(R)}$184(1-hydroxy-cyclohexylphenyl ketone) proved to be good for adhesion properties. This may be attributed to strong absorption near 350 nm wavelength and also high solubility in monomer mixtures. The addition of Irgacure$^{(R)}$819, bisacylphosphine oxides as a photoinitiator caused cohesive failure with high loading in a peel test owing to the additional radical formation. It is assumed that the insoluble photoinitiator reacts with oxygene, which may act as a hydrogen donor.

Studies of Performance and Enlarged Capacity through Multi-stages Stacked Module in Membrane Capacitive Deionization Process (막 축전식 탈염 공정의 다단 적층 모듈을 통한 처리 용량 증대 및 이의 성능 연구)

  • Song, Yye jin;Yun, Won Seob;Rhim, Ji Won
    • Membrane Journal
    • /
    • v.27 no.5
    • /
    • pp.449-457
    • /
    • 2017
  • In this study, the 10 stages stacked module was designed by increasing the number of unit cells in the membrane capacitive deionization(MCDI) process. The aminated polysulfone and sulfonated poly(ether ether ketone) were synthesized and coated on porous carbon electrode by casting method. The salt removal efficiency was measured for the 10 stage stacked module under the operation conditions of adsorption voltage and time, desorption voltage and time, flow rate and concentration of feed water, and di-valent solutions including $CaSO_4$, $MgCl_2$ and tap water. Typically, when 100 mg/L of NaCl as the feed was used, the salt removal efficiency was 98.3% at a flow rate of 100 mL/min, the adsorption condition of 1.2 V/3 min and desorption condition of -0.5 V/5 min.

Effect of an Extra Chloro Substituent on Photochemistry of o-Alkylphenacyl Chloride

  • Park, Bong-Ser;Jeong, Seong-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.12
    • /
    • pp.3053-3056
    • /
    • 2009
  • The title compound, ${\alpha},{\alpha}$-dichloro-o-methylacetophenone, was prepared and its photochemical behavior was investigated. Addition of an extra chlorine at alpha position to the carbonyl showed many different features from photochemical reactivities of mono chloro analogue, 2,5-dimethylphenacyl chloride. In benzene, a rearrangement product with a formal 1,5-Cl shift and a reduction product were formed beside indanone. In methanol, solvolysis and cyclization of a common dienol intermediate occurred at comparable reaction rates.