• 제목/요약/키워드: 0.9 V to 5 V

검색결과 2,836건 처리시간 0.034초

군산인근해역에서 분리동정된 Vibrio 속의 특성과 해수에서의 생존 (Characteristics and Survival of Genus Vibrio Isolated in the Intertidal Zone of the Yellow Sea near Kunsan)

  • 왕혜영;이건형
    • 환경생물
    • /
    • 제17권4호
    • /
    • pp.439-448
    • /
    • 1999
  • 1997년 11월부터 1998년 6월까지 총 4회에 걸쳐 군산인근 해역을 대상으로 Vibrio 속의 분포와 특성을 조사하였고, 분리동정된 Vibrio 속 3종(V. anguillarum, V. vulnificus, V, metschnikovii)을 대상으로 해수에서 수온 변화에 따른 생존을 관찰하였다. 조사 기간 중 총 해양 종속영양 세균의 분포는 평판도말법으로는 1.2$\pm$0.6$\times$$10^3$~2.0$\pm$1.5$\times$$10^4$CFU ml­$^1$을 나타냈으며, 형광현미경에 의한 직접측정법으로는 6.0$\pm$4.0$\times$$10^{5}$ ~1.9$\pm$1.5$\times$$10^{7}$ cells ml­$^1$의 범주에서 변화하여 측정방법에 따라 커다란 차이를 보였다. 해양 Vibrio의 분포는 1$\times$10~6$\pm$2.2$\times$$10^2$CFU ml­$^1$의 범주에서 변화하여 전반적으로 총 해양종속영양 세균의 수에 대하여 차지하는 비율은 0.l~6%였다. 최종 분리된 51균주를 Biolog Identification System$^{TM}$에 의해서 동정한 결과 V. mediterranei(11균주), V. anguillarum(13균주), V. netschnikovii(5균주), V. parahaemolyticus(5균주)등이 우점속으로 밝혀졌다. 분리 동정된 51균주들 간의 통계학적 유사도를 70%이상을 기준으로 grouping한 결과 26 group으로 나뉘어 본 조사해역에서 Vibrio 속의 다양성을 간접적으로 보여 주고 있다. 동정된 균주들에서 plasmid의 존재를 확인한 결과 65%에 해당하는 33균주가 plasmid를 갖고 있었으며 그 크기는 12kb이상으로 나타났다. 또한 분리된51균주들에 대하여 7종의 항생제 (gentamicin, ampicillin, chlorarnphenicol, streptomycin, kanamycin, tetracycline, carbenicillin)에 대한 내성을 측정한 결과 51균주들 중 96%가 한 종류 이상의 항세균제에 대하여 내성을 나타냈다. 분리 동정된 균주들 중 V. angulliarum, V. vulnificus, V. metschnikovii를 대상으로 여과된 해수에 접종시켜 생존율을 4, 15, $25^{\circ}C$에서 30일간 측정한 결과 15$^{\circ}C$에서 가장 높은 생존율을 보였다.

  • PDF

22.9 kV-y 배전선로의 전압계측방법 개선에 관한 연구 (A Study on the Improvement of Voltage Measuring Method of 22.9 kV-y Distribution Lines)

  • 길경석;송재용
    • 센서학회지
    • /
    • 제7권4호
    • /
    • pp.293-299
    • /
    • 1998
  • 본 연구의 목적은 22.9 kV-y 특별고압 배전선로상에서 가스절연개폐기를 이용한 전압측정장치의 개발에 있다. 본 논문에서 제안한 전압측정장치는 일종의 광대역 용량성 분압기로, 가스개폐기의 절연붓싱에 설치한 검출전극, 임피던스 정합회로 및 전압버퍼로 구성되며, 기설의 가스절연개폐기에 구조 변경 없이 설치될 수 있다. 제작된 전압측정장치는 교정과 적용성 평가를 위하여 25.8 kV, 400 A 가스절연개폐기에 설치되었으며, 5 ns의 상승시간을 갖는 직각파 발생기로 주파수 응답특성을 조사하였다. 실험결과로부터 본 전압측정장치의 주파수 대역은 1.35 Hz에서 약 13 MHz이었으며, 60 Hz 상용주파수 전압에서 분압비 오차는 0.2% 이하였다. 또한 상용주파수 전압과 비진동성 충격전압에 대한 분압비와의 편차는 0.7% 이하로 나타났다.

  • PDF

Optimization of airborne alpha beta detection system modeling using MCNP simulation

  • Sung, Si Hyeong;Kim, Hee Reyoung
    • Nuclear Engineering and Technology
    • /
    • 제52권4호
    • /
    • pp.841-845
    • /
    • 2020
  • An airborne alpha beta detection system using passivated implanted planar silicon (PIPS) detector was modeled with the MCNP6 code and its resolution and detection efficiency were analyzed. Simulation of the resolution performed using the Gaussian energy broadening (GEB) function showed that the full width at half maximum (FWHM) of 35.214 keV for alpha particles was within 34-38 KeV, which is the FWHM range of the actual detector, and the FWHM of 15.1 keV for beta particles was constructed with a similar model to 17 keV, which is the FWHM range of an actual detector. In addition, the detection efficiency and the resolution were simulated according to the distance between the detector and the air filter. When the distance was decreased to 0.2 cm from 0.8 cm, the efficiency of the alpha and beta particles detection decreased from 5.33% to 4.89% and from 5.64% to 4.27%, respectively, and the FWHM of the alpha and beta particles improved from 40.9 KeV to 29.84 keV and 25.76 keV-13.27 keV, respectively.

흡착 벗김 전압전류법에 의한 구리이온(II) 존재하에서 티오글리콜산의 정량 (Determination of Thioglycolic acid in the presence of Copper(II) by Adsorptive Stripping Voltammetry)

  • 홍미정;권영순
    • 분석과학
    • /
    • 제8권1호
    • /
    • pp.25-32
    • /
    • 1995
  • 구리이온(II)과 티오글리콜산의 착물인 CuRS를 HMDE(Hanging Mercury Drop Electrode)에 흡착시켜 음극으로 주사하는 흡착벗김 전압전류법으로 미량의 티오글리콜산을 정량하는 방법을 고찰하였다. 지지 전해질로는 pH 6.5 인산염 완충용액과 pH 9.5 붕산염 완충용액을 사용하였고, 최적 조건은 구리이온(II) 농도 $1{\times}10^{-4}M$, 흡착 축적 전위 -0.2V, 흡착 축적 시간 60초, 그리고 주사 속도 20mV/sec이다. 이 때 티오글리콜산의 검출 한계는 $1{\times}10^{-9}M$이다. 이 조건하에서 콜드 파마액과 제모제 속에 포함된 티오글리콜산의 함량을 구하였다.

  • PDF

Characterization of a Novel Carbohydrase from Lipomyces starkeyi KSM 22 for Dental Application

  • KIM, DOMAN;SU-JIN RYU;SOO-JIN HEO;DO-WON KIM;HO-SANG KIM
    • Journal of Microbiology and Biotechnology
    • /
    • 제9권3호
    • /
    • pp.260-264
    • /
    • 1999
  • The combined activities of dextranase and amylase(DXAMase) from Lipomyces starkeyi KSM 22 produced from starch fermentation inhibited or prevented dental plaque formation. The activities were stable in commercial mouthwash products; DXAMase activity retained over 93% of original activity after 6 months at 23℃. We examined the effects of enzyme inhibitors and active ingredients in mouthwash on DXAMase activity. The DXAMase was stable with 0.29%(w/v) EDTA, 20% (v/v) ethanol, 0.05% (w/v) fluoride, and 0.05% (w/v) SDS. Among the active ingredients of mouthwash, sodium benzoate (up to 1 %, w/v) had no inhibitory effect on either dextranase or amylase activity. In the case of cetylpyridinium chloride, the addition of 0.05% (w/v) inhibited 6% of dextranase activity and 13% of amylase activity. Propylene glycol (up to 1%, w/v) showed no inhibitory effect on either enzyme activity. DXAMase (5 IU/㎖) in mouthwash could remove pre-formed films of glucan-bound S. mutans cells. The addition of 0.1 IU/㎖ DXAMase in mouthwash prevented the formation of insoluble-glucan. These in vitro properties of L. starkeyi KSM 22 DXAMase are desirable for its application as a dental plaque control agent.

  • PDF

펄스차이 폴라로그래피를 이용한 갑상선기능조절 약제 중의 2-mercapto-1-methyl-imidazole 분석 (Analysis of 2-Mercapro-1-Methylimidazole in Controlling Drug of Thyroid by Differential Pulse Polarography)

  • 김일광;천현자;한성수
    • 대한화학회지
    • /
    • 제48권2호
    • /
    • pp.137-143
    • /
    • 2004
  • 5.0${\times}10^{-2}$ M LiClO4 지지전해질에서 2-mercapto-1-methyl-imidazole(MMI)의 분석을 펄스차이폴라로그래피로 조사하였다. MMI의 분석에서 적절한 조건은 다음과 같다; 초기전위: -0.9 volts, 펄스세기: 0.08 mV, 주사속도: 2 mV/sec. 표준검량곡선은 1.0${\times}10^{-7}{\sim}8.0{\times}10^{-5}$ M 범위에서 좋은 직선성을 보였으며, 검출한계는 (2.2${\pm}0.1){\times}0.1^{-9}$ M이었다. 이 방법으로 첨가제의 방해없이 항갑상선 약제중의 MMI를 정량하는데 응용하였다.

고효율, Temperature/voltage 변화에 둔감한 Triple-mode CMOS DC-DC Converter (A High-Efficiency, Robust Temperature/voltage Variation, Triple-mode DC-DC Converter)

  • 임지훈;하종찬;김상국;위재경
    • 대한전자공학회논문지SD
    • /
    • 제45권6호
    • /
    • pp.1-9
    • /
    • 2008
  • 본 논문에서는 temperature/voltage에 둔감한 triple-mode CMOS DC-DC Converter를 제안한다. 제안된 triple-mode DC-DC converter는 단일 배터리의 수명에 따른 전압변화(3.3-5.5V)로부터 일정 또는 다양한 출력전압(0.6-2.2V)을 생성한다. 제안된 triple-mode CMOS DC-DC converter는 Pulse Width Modulator(PWM) 모드, Pulse Frequency Modulator(PPM) 모드, 그리고 Low Drop-Out(LDO) 모드, 이렇게 세 가지 모드로 동작한다. 또한, 제안된 회로는 temperature/voltage 변화에 의한 칩의 오동작을 방지하기 위해 temperature/voltage 변화에 둔감한 저 전력 1MHz CMOS ring oscillator를 사용한다. 제안된 triple-mode DC-DC converter는 단일 입력 전원소스(3.3-5.5V)에서 출력 전압(0.6-2.2V)을 생성하며, 출력 전압 ripple은 PWM mode에서 10mv, PFM mode에서 15mV, 그리고 LDO mode에서는 4mV 이하이다. 또한, 제안된 회로의 효율은 PWM mode에서 93% 이상이며, $-25-80^{\circ}C$의 온도변화에도 각 모드에서의 출력 전압 레벨의 오차는 단지 0.8% 이하로 유지한다 제안된 회로의 검증을 위해 CMOS $0.35{\mu}m$ 공정을 이용한 시뮬레이션 및 칩 테스트를 수행하였다.

소아연령군에서의 영구 심외막 심박 조율 13년 경험 (Thirteen-year Experience of Permanent Epicardial Pacing in Children)

  • 한국남;임홍국;김웅한;김용진;노준량;배은정;노정일;윤용수;안규리
    • Journal of Chest Surgery
    • /
    • 제37권6호
    • /
    • pp.499-503
    • /
    • 2004
  • 배경: 본 연구에서는 소아연령군에서 과거 13년 동안 시행한 심외막 인공 심박 조율 수술의 임상경험을 바탕으로 인공 심박동기의 평균 수명, 역치, 재수술의 원인 등을 알아보고자 하였다. 대상 및 방법: 1989년 1월부터 2002년 7월까지 영구 심박 조율기 또는 전극의 이식을 시행한 83명의 환아에게 시행한 121예의 수술을 대상으로 하였다. 후향적으로 환자의무기록을 조사하여 심박 조율기의 수명, 자극 역치, 저항, R파, P파, 감지 역치 등을 조사하였다. 결과: 수술 당시 측정한 평균 심실 자극역치는 1.2$\pm$0.l (0.1∼5) mV, 평균 저항은 519.1$\pm$18.1 (319∼778) ohm, 평균 심실 R파 감지역치는 8.9$\pm$0.7 (4∼20) mV, 평균 P파 감지역치는 2.5$\pm$0.7 (0.4∼12) mV 이었다. 심박 조율기의 평균 수명은 64.7$\pm$3.7 (2∼196)개월이었다. 심박 조율기 무재수술률은 1년 94.6%, 2년 93.6%, 5년 80.8%, 7년 63.7%, 10년 45.4%였다. 재수술의 원인은 전지 고갈이 26예, 전극 이상이 9예 등이었다. 심박 조율기 삽입 후 이의 오작동과 관련된 수술 후 조기 사망은 없었다. 결론: 소아연령군에서 심외막 심박 조율기 삽입 후 재수술 없이 이를 사용할 수 있는 비율은 비교적 만족할 만한 수준으로 19.1%의 환자만이 5년 내에 재삽입이 필요했다. 스테로이드 용출 전극의 재수술률은 6.7%로 이는 심외막 심박 조율기의 수명을 늘리는 데 도움이 될 것으로 생각된다.

낙뢰 예방 배전선로의 현장 적용을 위해 모의된 22.9 kV-Y의 접지저항에 따른 유도전압의 평가 (An Evaluation of Induced Voltage according to the Grounding Resistance of a 22.9 kV-Y Distribution Line Simulated for its Field Application for Lightning Prevention)

  • 김점식;최충석
    • 한국안전학회지
    • /
    • 제30권5호
    • /
    • pp.14-19
    • /
    • 2015
  • This study performed simulation tests to prevent induced lightning that occurs to a 22.9 kV-Y distribution line. A simulated distribution line reduced to 1/50 of an actual distribution line was installed to measure the induced voltage according to the change in grounding resistance. It was found that the induced voltage increased as the grounding resistance increased but that the range of its increase was small. This study examined the reliability of the proposed lightning preventive distribution line using the Minitab program (Minitab 17). When a grounding resistance of $300{\Omega}$ was maintained for each electric pole, the Anderson Darling (AD) was 0.410, the smallest, and the P value was analyzed to be 0.323, verifying that the reliability and stability were excellent. Therefore, these results will be utilized as a basis for the substantiation of a lightning preventive distribution line before its installation.

Application of Thermotolerant Yeast at High Temperature in Jar-fermentor Scale.

  • Sohn, Ho-Yong;Kim, Young-Ho;Rhee, In-Koo
    • Journal of Microbiology and Biotechnology
    • /
    • 제4권4호
    • /
    • pp.316-321
    • /
    • 1994
  • We investigated the possibility of industrial application and economit process of high temperature fermentation by thermotolerant alcohol producing yeasts as previously reported. From the 20% glucose media, the RA-74-2 produced 11.8% (v/v) ethanol at $32^{\circ}C$ (0.5% inoculum) and 10.6% (v/v) ethanol at $40^{\circ}C$ (3% inoculum), respectively. Also, 11.3% (v/v) ethanol was produced for 96 hours in the temperature-gradient fermentation. These results suggest that the RA-74-2 could isuccessfully be applied to save the cooling water and energy in industrial scale without re-investment or modification of established fermentation systems. When potato starch was used as the substrate for the RA-74-2, high temperature fermentation above $40^{\circ}C$ was more appropriate for industrial utilization because organic nitrogen was not necessary to economical fermentation. As the naked barley media just prior to industrial inoculation, taken from the Poongkuk alcohol industry Co., were used, 9.6% (v/v) ethanol was produced at $40^{\circ}C$ for 48 hours in jar-fermentor scale (actually, 9.5-9.8% (v/v) ethanol was produced at 30~$32^{\circ}C$ for 100 hours in industrial scale). The ethanol productivity was increased by the high glucoamylase activity as well as the high metabolic ratio at $40^{\circ}C$ Therefore, if the thermotolerant yeast RA-74-2 would be used in industrial scale, we could obtain a high productivity and saving of the cooling water and energy. Meanwhile, the RA-912 produced 6%(v/v) ethanol in 10% glucose media at $45^{\circ}C$ and showed the less ethanol-tolerance compared with industrial strains. As the produced alcohol was recovered by the vacuum evaporator at $45^{\circ}C$ in 15% glucose media, the final fermentation ratio was enhanced (76% of theoretical yields). This suggest that a hyperproductive process could be achieved by a continuous input of the substrate and continuous recovery of the product under vacuum in high cell-density culture.

  • PDF