• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.185-195
• /
• 1998

This experiment carried out in order to investigate the effect of the chemical activators for acceleration of hydration the system of Fly ash-Cao The paste was consisted of 80wt% Fly ash and 20wt% CaO with 1. 3. 5wt% of 4 activators(N{{{{ alpha _2 }}S{{{{ OMICRON _4 }}, CaC{{{{ {l }_{2 } }}, NaOH, Ca(N{{{{ OMICRON _3 {)}_{2 } }} and W/S ratio of 0.42 After curing for 1, 3, 7, 14, 28 days the paste hydration was characterized by the measurement of compressive strength XRD analysis SEM observation the combined water and the reaction amount of Ca(OH)2 determination. As a result of this ex-periment all of the system which involved Na2SO4 or NaOH had a god compressive strength. In the case of 7 days curing a system which added CaCl2 showed the highest compressive strength among all especially NaOH system showed a high increase in strength as a dosage of it increased. Hydration products were different according to activatores added. Only C-S-H was observed in NaOH system. As the reaction amount of Ca(OH)2 and combined water were increased the compressive strength increased. There were few differences in the comparision of strength between ignited loss 3.1% and loss 9.3% of fly ash.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.711-719
• /
• 2012

The collagens from squid (Todarodes pacificus) skin and Alaska pollack (Theragra chalcogramma) skin were extracted and their physicochemical properties were investigated. The yield was improved with the increase of NaOH concentration and was increased Neutrase than Alcalase in enzymatic hydrolysates. Protein and collagen contents from Alaska pollack skin were 38.3~62.7% and 13.1~28.9%, respectively. All enzymatic hydrolysates also showed high antioxidant activities as NaOH concentration decrease. Composition of their amino acids was mainly glycine and proline. The spectrum of FT-IR of the collagen showed wavenumber at $1,631cm^{-1}$, $1,549cm^{-1}$, $1,234cm^{-1}$ and $3,322cm^{-1}$ representing the regions of amide I, amide II, amide III and amide A, respectively. The decomposition temperature for the collagen was in the range of $300^{\circ}C$ and showed relatively good enough for their thermal stabilities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.62-70
• /
• 2009

The objective of this study was to measure the leaching of filler (Si, Ba) from nanofiller-contained composites (Palfique Estelite $sigma^{{R}}$ (Tokuyama Dental Corp., Tokyo, Japan), $Z-350^{{R}}$ (3M ESPE, USA), Ceram X duo $E3^{{R}}$, $D3^{{R}}$ (Dentsply, Konstanz, Germany)) under different conditions. The samples used for the study of leachable components were made by insertion of the material into a circular mold, 10 mm in diameter and 3.0 mm high. Each specimen was placed in a disposable polystyrene vial containing 5 mL of distilled water, artificial saliva or 0.1N NaOH and kept in an oven at $37^{\circ}C$. ; water and artificial saliva - 150 days, 0.1N NaOH - 15days. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) was used to determine the amount of Si and Ba in the test solutions. 1. Filler leaching was significantly great in 0.1N NaOH among all samples(p<.0.001). 2. When samples were stored in the distilled water, Estelite showed the lowest amount of Si leaching. When samples were stored in the artificial saliva, Z-350 showed the lowest amount of Si leaching. 3. There were significant differences in filler leaching between 3 storage medias and composite resins(p<.0.001). 4. Si and Ba leaching occurred in greater proportion when samples were stored in the artificial saliva than distilled water. 5. There were significant interactions in monthly filler leaching between leaching in artificial saliva and in distilled water, as well as the interaction between storage medium and filler(p<.0001). These results indicate that a continuous filler leaching of nanofiller-contained composite resins was in storing aqueous solutions under over time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1583-1588
• /
• 2007

PC-camera based automatic titration was executed in the acidity analyses of vinegar, milk and Takju. The average hue value (Havg) of 144 pixels in the image of the sample solution being titrated was computed and followed up at regular time intervals during titration in order to detect the titration end point. The Havg increase of 5 degrees from the first Havg was regarded as reaching at the end point in the cases of vinegar and milk. The Havg increase set up to detect the end point was 70 degrees in the case of Takju. In the case of vinegar, the volume of added titrant (0.1 N NaOH) was $21.409{\pm}0.066mL$ in manual titration and $21.403{\pm}0.055mL$ in automatic titration (p=0.841). In the case of milk, it was $1.390{\pm}0.025mL$ in manual titration and $1.388{\pm}0.027mL$ in automatic titration (p=0.907). In the case of Takju, it was $4.738{\pm}0.028mL$ in manual titration and $4.752{\pm}0.037mL$ in automatic titration (p=0.518). The high p values suggested that there were good agreements between manual and automatic titration data in all three food samples. The automatic method proposed in this article was considered to be applicable not only to acidity titrations but also to most titrations in which the end points can be detected by color change.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.288-293
• /
• 1995

The separation and determination of boron with chromotropic acid (1,8-Dihydroxynaphthalene-3,6-disulfonic acid) as a complex agent has been studied using ion pair liquid chromatography. The use of tetrabutylammonium bromide added as an ion pair reagent to mobile phase (MeOH 61%, phosphate buffer 39% pH=8.5) allowed good separation of boron-chromotrophic acid complex anion and chromotrophic acid on poly(styrene-divinylbenzene) based reversed phase column (PRP-1, 15 $cm{\times}4.6$ mm i.d.). The complex formation between boric acid and chromotrophic acid was enhanced in the presence of 0.1 M tetrabutylammonium bromide, resulting in high sensitivity. The linear calibration was achieved over the boron concentration range of 0.5∼1000 ${\mu}g/L.$ The detection limit was 0.5 ${\mu}g/L$ (S/N=2). The proposed method was applied to the determination of boron in commercially available chemicals, $Na_2SO_4$, NaOH, KCl.

• Carbon letters
• /
• v.6 no.3
• /
• pp.158-165
• /
• 2005

Room temperature kinetics of degradation of nerve agent simulants and sarin, an actual nerve agent at the surface of different carbon based adsorbent materials such as active carbon grade 80 CTC, modified whetlerite containing 2.0 and 4.0 % NaOH, active carbon with 4.0 % NaOH, active carbon with 10.0 % Cu (II) ethylenediamine and active carbon with 10.0 % Cu (II) 1,1,1,5,5,5-hexafluoroacetylacetonate were studied. The used adsorbent materials were characterized for surface area and micropore volume by $N_2$ BET. For degradation studies solution of simulants of nerve agent such as dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DEClP), diethyl cyanophosphate (DECnP) and nerve agent, i.e., sarin in chloroform were prepared and used for the uniform adsorption on the adsorbent systems using their incipient volume at room temperature. Degradation kinetics was monitored by GC/FID and was found to be following pseudo first order reaction. Kinetics parameters such as rate constant and half life were calculated. Half life of degradation with modified whetlerite (MWh/NaOH) system having 4.0 % NaOH was found to be 1.5, 7.9, 1206 and 20 minutes for DECnP, DEClP, DMMP and sarin respectively. MWh/NaOH system showed maximum degradation of simulants of nerve agents and sarin to their hydrolysis products. The reaction products were characterized using NMR technique. MWh/NaOH adsorbent was also found to be active against sulphur mustard.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.600-606
• /
• 2018

The influence of acidity in MTT zeolite of different Si/Al molar ratio's on the catalyst activity in methanol-to-olefin (MTO) reaction has been investigated. The Si/Al ratio was controlled with the Al content in the gel when N,N,N',N'-tetramethyl-1,3-diaminopropane was used as a structure directing agent (SDA). The gel composition was controlled to $20SiO_2$ : 30SDA : x (=0.25~1.25)$NaAlO_2$ : 2NaOH : $624H_2O$, which was subject to the hydrothermal synthesis at 433 K for 4 days. As the composition of sodium aluminate decreased, the particle size of MTT zeolite increased, and also the amount of acid sites decreased. To investigate the catalytic performance, MTO reaction was carried out at 673 K with $1.2h^{-1}$ WHSV. It was found that the H-MTT (1.00Al) catalyst with a Si/Al molar ratio of 24 maintained the methanol conversion over 90% for 900 min.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.873-879
• /
• 2003

The study was conducted to improve the nutritive value of defatted rice polishing (DRP). DRP was treated with various concentrations of HCl, NaOH, $H_2O_2$ and Kemzyme-H $F^{(R)} and the effect on its chemical composition and nutritive value in broiler chicks was observed. The treatments levels of 0.4 N HCl, 0.2 N NaOH and 6% $H_2O_2$ were selected from many concentrations of HCl, NaOH and $H_2O_2$ tried earlier on DRP. The selection was made on the basis of release of nutrients from DRP. The Kemzyme-H $F^{(R)} was used at rate of 0.1% of DRP. The selected concentrations of HCl, NaOH, and $H_2O_2$ were then used for treatment of DRP that was used in biological experiments. Two hundred and forty, day-old Hubbard male broiler chicks (38-40 g) were randomly divided into 48 experimental units with five chicks each. Each chemically treated DRP was incorporated into broiler diets at 10, 20 or 30% levels replacing yellow corn from the control feed and thus sixteen experimental feeds were prepared. These feeds were randomly assigned to 48 experimental units such that there were three replicates of chicks on each diet. The results of the study suggest that DRP can be effectively used in broiler diets at 20% level. The best weight gain and feed conversion ratio were observed with diet containing 20% level of DRP treated with 6% $H_2O_2$. The diets containing 30% levels of treated DRP were uneconomical, as excess use of oil was required to compensate the energy needs of the birds.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.57-66
• /
• 1988

A series of experiments is performed to measure radon concentration in the near-surface soil gas at the four locations (Cheju-Si, Seoguipo-Si, Taejeong-eup, Seongsan-eup) in Cheju Island, using CR-39 detectors placed inside radon cups. Two types of radon cups are installed in shallow holes of about 15 cm in diameter and 50cm in depth. The optimum etching conditions, i.e., the concentration of NaOH solution, etchant temperature and etching time, are found to be 625N, $70^{\circ}C$ and 5.5 hours for CR-39 detectors. A typical conversion factor of radon cup is calculated as $$1track/mm^3{\cdot}30day=0.059Bq/{\ell}$$. Average radon concentrations over 30 days measured in Cheju Island from May 1, 1987 to April 23, 1988 are $3.1{\pm}0.3Bq/{\ell}$ for open radon cups and $1.7{\pm}0.2Bq/{\ell}$ for closed radon cups.