• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.79-85
• /
• 2012

In this study, Application of sequencing batch reactor (SBR) process for RO retentate treatment was performed. Efficiency of treatment by load and temperature variation was tested. The SBR process was operated two types as HRT per one cycle was 8 and 12 hours, respectively. Methanol was injected for an effective denitrificaion owing to low C/N ratio of the RO retentate. TN removal efficiency of the SBR process was relatively stable at the change of flow-rate and temperature. The optimum time cycle of SBR process was 2 cycle/day for TN removal, and in the case of 3 cycle/day, the effluent TN concentration was found under the effluent quality standard. In the result of assessment, the application of SBR process for RO retentate treatment was effective and could be utilized to design for the wastewater treatment plant. The specific nitrification rate (SNR) and specific denitrification rate (SDNR) were $0.043{\sim}0.066kg\;NH_3-N/kg\;MLVSS{\cdot}day$ and $0.096{\sim}0.287kg\;NH_3^--N/kg\;MLVSS{\cdot}day$, respectively. The derived kinetic could be applied for design to the aerobic and anoxic tank in the RO retentate treatment.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.127-137
• /
• 2022

Effects of substrate bed interior environments on mushroom qualities were investigated in oyster mushroom cultivation facilities in which either Reversible Air-Circulation Fans (RACF) blowing air in two directions (upwards and downwards) or customary Convection Fans (CF) with air blowing only upwards were operated throughout the cultivation period. Two days before harvest, the deviation ranges of the bed interior temperature and relative humidity in the facility using RACF were in the ranges of 1.0-1.3℃ and 7.8-9.0% in the first growing cycle, and within 0.7-1.1℃ and 10.0-11.4% in the second cycle. In the facility using CF, the ranges of variation in the indoor environment parameters (5.8-6.4℃ and 21.3-23.1% in the first growing cycle, and 3.4-5.7℃ and 14.6-18.3% in the second growing cycle) were much enlarged compared to those associated with RACF. These results strongly indicate that RACF significantly enhances air uniformity. Some mushroom qualities differed between growing cycles. For instance RACF in the first cycle gave somewhat better qualities than CF, but some qualities, like pileus diameter and stipe length, were slightly lower than those described for CF in the second cycle when the cultivation substrate weakened. The observation that some qualities worsened under RACF conditions, despite better air uniformity during the growing cycle, revealed the possibility that downward wind may exert a non-negligible negative effect on mushroom growth. Therefore in the future, making wind measurements on the interior and exterior of substrate beds is necessary to obtain insights into their influences on mushroom qualities. The RACF operation manual needs to be edited to convey this necessity.

• Korean Journal of Veterinary Research
• /
• v.55 no.2
• /
• pp.111-116
• /
• 2015

In the present study, the effects of different photoperiods on stress, immunity, and hematological parameters in ICR mice were evaluated. Fifty male ICR mice 7 weeks old (body weight, $27.3{\pm}2.5g$) were divided into five groups: DP-0 (0/24-h light/dark cycle), DP-6 (6/18-h light/dark cycle), DP-12 (12/12-h light/dark cycle), DP-18 (18/6-h light/dark cycle), and DP-24 (24/0-h light/dark cycle). During the experimental period, no significant differences in body weight or feed intake were observed between the groups. Hematological analysis revealed that white blood cell, red blood cell, and hemoglobin values for the DP-0 group were significantly different compared to those of the other groups. After 28 days, no significant difference in serum cortisol concentration was observed among the groups, but serum cortisol levels increased in a light exposure-dependent manner. Total serum immunoglobulin G (IgG) concentrations of the DP-0 and PD-6 groups were significantly increased compared to those of the other groups (p < 0.05), and serum total IgG levels decreased in a light exposure-dependent manner. Results of the present study indicated that various photoperiods affect hematological parameters and total serum IgG levels in ICR mice while having no significant effects on body weight, feed intake, or cortisol levels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.615-622
• /
• 2010

In this study, a 0D multizone spray-combustion model is developed for the estimation of the performance and NOx emission of medium-sized direct-injection marine diesel engine. The developed combustion model is coupled with the commercial 1D cycle-simulation model, Boost, to analyze the entire engine system, including the intake and exhaust. The combustion model code was generated using Fortran90, and the model was coupled with Boost by connecting the generated code to a user-defined high-pressure cycle (UDHPC) interface. Simulation was performed for two injectors (8 holes and 10 holes) and two engine loads (50% and 100%), and the results of simulation were in good agreement with engine performance test.

• Korean Journal of Animal Reproduction
• /
• v.17 no.2
• /
• pp.159-164
• /
• 1993

The tissue levels of ornithine decarboxylase (ODC) during the estrous cycle and pregnancy were investigated in the pig. Sexually mature female cycling pigs were used. One animal was sacrificed on estrous cycle days 3, 10, 17, 18, 19, 20 and during pregnancy on day 11. 12, B. 14, 18, 19, 20, 48, 50 and 52. Tissues from the hypothalamus, pituitary, uterus, ovary and skeletal muscle were removed. They were homogenized in buffer, and supernatants were used for measurement of protein concentration and ODC activity. The release of $^14$CO$_2$ from radiolabeled ornithine was proportional to the amout of protein added over the range of 0.125~4mg and to the incubation time. ODC appered to have some relationship with the biological functions of the pituitary, ovary and uterus during the reproductive period, especially on day 19 of the estrous cycle, while it showed no such activities in hypothalamus and skeletal muscle of mature pigs. Uterine tissues had significantly more ODC activity than other tissues tested(p < 0.05).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.223-229
• /
• 2009

The effects of 0.01%(w/v) chitosan-ascorbate(CA) and 10 ppm morea on the number of total microbes, Escherichia coli levels, and growth of food poisoning bacteria in dombaeki during storage at $10^{\circ}C$ over 6 days were investigated. Total microbes in meat, cartilage, and skin of untreated samples increased by 4.24, 3.81, and 2.20 logs compared to the zero timepoint, respectively, but, in CA-treated samples, counts fell by 2.66, 2.37, and 1.24 logs. Total microbial levels in morea-treated meat, cartilage, and skin showed similar tendencies but the effects were slightly less than seen in CA-treated samples. E. coli numbers in CA-treated meat, cartilage, and skin stored for 6 days decreased by 1.69, 1.25, and 1.52 logs respectively, compared with control samples. Morea-treated samples showed similar falls, but the effects were again slightly less than seen after CA-treatment. Both Salmonella and Vibrio parahaemolyticus were detected in untreated meat stored for 3 or 6 days. Food poisoning bacteria were found in both untreated and morea-treated samples stored over 6 days. However, no such bacteria were detected in CA-treated samples. Also, CA-treated meat, cartilage, and skin showed low degrees of degeneration. Thus, CA treatment enhanced shelf-life and dombaeki quality by inhibiting microorganism growth and tissue breakdown during storage.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.69-69
• /
• 2001

The cell cycle phase in which donor nuclei exist prior to nuclear transfer is an important factor governing developmental rates of reconstituted embryos. It was suggested that quiescent G0 and cycling G1 cells could support normal development of reconstituted embryos. In a quest of optimized donor nuclei treatment prior to nuclear transfer, this study was undertaken to examine the cell cycle characteristics of bovine fetal and adult somatic cells when cultured under a variety of culture treatments and the cell cycle change with the lapse of time after trypsinization. This was archived by measuring the DNA content of cells using flow cytometry, Cultured fetal fibroblast cells, adult skin and muscle cells, and cumulus cells were divided by 3 culture treatments; 1) grown to 60-70% confluency (cycling), 2) serum starved culture, 3) culture to confluency. Trypsinized cells were fixed by 70% ethanol and stained with propidium iodide. For one experiment, trypsinized cells were resuspended in DMEM＋10% FBS and incubated for 1.5, 3 and 6 h with occasional shaking before ethanol fixation. Cell cycle phases were determined by flow cytometry enabling calculation of percentages of G0＋G1, S and G2＋M. The majority of cells were in G0＋Gl stage regardless of origin of cells. Cultures that were serum starved or cultured to confluency contained significantly (P<0.05) higher percentages of cells in G0＋G1 (89.5-95.4%). For every cell lines and culture treatments, percentages of cells in existing in G0＋G1 increased with decreasing of the cell size from large to small. In the serum starved and confluency groups, about 98% of small cells were in G0＋G1 Serum starved culture contained higher percentages of small-sized cells (38.5-66.9%) than cycling and confluent cultures regardless of cell lines (P<0.05). After trypsinization of fetal fibroblast and adult skin cells that were serum starved and cultured to confluency, the percentages of cells in G0＋G1 significantly increased by incubation for 1.5(95.7-99.5%) and 3.0 h (95.9-98.6%). The results suggest that the efficient synchronization of bovine somatic cells in G0＋G1 for nuclear transfer can be established by incubation for a limited time period after trypsinization of serum starved or confluent cells.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.6
• /
• pp.349-353
• /
• 2003

The physiological characteristics of cultures of very high cell mass (e.g. 10g cell mass/L), termed“ultrahigh cell density cultures”is reviewed. A close relationship was found between the length of the optical path (OP) in flat-plate reactors and the optimal cell density of the culture as well as its areal (g m$\^$-2/ day$\^$-1/) productivity. Cell-growth inhibition (GI) unfolds as culture density surpasses a certain threshold. If it is constantly relieved, a 1.0cm OP reactor could produce ca. 50% more than reactors with longer OP, e.g. 5 or 10cm. This unique effect, discovered by Hu et al. [3], is explained in terms of the relationships between the frequency of the light-dark cycle (L-D cycle), cells undergo in their travel between the light and dark volumes in the reactor, and the turnover time of the photosynthetic center (PC). In long OP reactors (5cm and above) the L-D cycle time may be orders of magnitude longer than the PC turnover time, resulting in a light regime in which the cells are exposed along the L-D cycle, to long, wasteful dark periods. In contrast, in reactors with an OP of ca. 1.0 cm, the L-D cycle frequency approaches the PC turnover time resulting in a significant reduction of the wasteful dark exposure time, thereby inducing a surge in photosynthetic efficiency. Presently, the major difficulty in mass cultivation of ultrahigh-density culture (UHDC) concerns cell growth inhibition in the culture, the exact nature of which is awaiting detailed investigation.

• Journal of Welding and Joining
• /
• v.8 no.2
• /
• pp.40-52
• /
• 1990

Fatigue behavior of the AH, DH and EH grade TMCP(Thermo-Mechanical Control Process) steels was studied. High cycle and low cycle fatigue tests were carried out for the weldment and base metal of each steel. The results showed that the fatigue limit at 2 * $10^6$ cycles was 33 to 37 kg/$mm^2$ for the base metal and 30 to 34 kg/$mm^2$ for the weldment. The ratio of fatigue limit to tensile strength for TMCP steels was 0.65 to 0.71, which was a value close to the upper limit for the ordinary steels. It was also found that the high cycle fatigue behavior of TMCP steels could be affected by the microstructures of base metal. It will be necessary to have fine structure for TMCP steels to increase the fatigue resistance. In low cycle fatigue test, the fatigue lifetime of AH and DH steels accorded well with the ASME best fit curve, while that of EH steel was considerably lower than the fatigue lifetime of the other steels. Fatigue resistance of the weldment made by high heat input(180kJ/cm) welding was not lower than that made by low heat input(80kJ/cm) welding in case of high cycle fatigue, but the high heat input welding decreased the fatigue resistance in case of low cycle fatigue.