• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.773-780
• /
• 2003

The characteristics of soft clays is very important for the land development plan. This study is to investigate correlations between the engineering properties and the characteristics of clay minerals of the disturbed clay samples obtained from Sihwa area. This study included X-Ray Diffraction Analysis, X-Ray Fluorescence Spectrometer Analysis, Scanning Electron Microscopy Analysis and Energy Dispersive X-Ray Spectrometer Analysis. The correlations between the clay mineral properties and the laboratory and field testing results were investigated.

• 에너지공학
• /
• 제23권1호
• /
• pp.1-6
• /
• 2014

본 에너지 분산 형 미세열량측정에 관한 자료는 에너지 분산 형의 우수한 조작 성을 유지하면서 파장 분산 형과 비슷한 정도의 에너지 분해능을 가질 수 있도록 개선한 것으로 광범위한 에너지의 X선을 검출을 할 수 있다. X선을 검출하기 위해서 이용되는 파장 분산 형은 에너지 분해능이 우수하지만 X선의 파장에 대해 검출 각도를 변화시켜야 하고 검출하고자 하는 특정 X선 종류에 따라 몇 가지의 검출기를 필요로 하고 있다. 그러나 에너지 분산 형의 검출기는 한 개의 검출기로 광범위한 X선을 동시에 검출할 수 있으며 조작 방법도 비교적 용이하다. 그러나 에너지 분산 형은 에너지 분해능이 우수하지 못 하고 또한 인접한 에너지를 갖는 X선은 그 피크가 중첩되어 구별하기가 어려운 경우도 있다. 에너지 분해능은 파장분산 형이 2~20 eV이고 에너지 분산 형은 140~180 eV로 상당한 차이가 있다.

• 암석학회지
• /
• 제3권1호
• /
• pp.34-40
• /
• 1994

High pressure X-ray diffraction study was carried out on a graphite to investigate its compressibility as well as any possible phase transition to the hexagonal diamond structure at room temperature. Energy dispersive X-ray diffraction method was introduced using a Mao-Bell type diamond anvil cell with Synchrotron Radiation. Polycrystalline sodium chloride was compressed together with graphite for the high pressure determinations. Because of the poor resolution of the X-ray diffraction pattern of graphite, its compressibility was estimated to be almost same as that of NaCl by graphite (002) X-ray diffraction peak only. An observation of any new peak from a possible hexagonal diamond phase seems very unplausible for its definite identification based on the present data. Alternative approaches such as an Wiggler Radiation source as well as a Large Volume high pressure apparatus will be necessary for the detailed studies on a graphite in future.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.131-134
• /
• 2015

Here we show how by processing energy dispersive X-ray spectrometry (EDS) data obtained using highly sensitive, new generation EDS detectors in the AZtec LayerProbe software we can obtain data of sufficiently high quality to non-destructively measure the number of layers in two-dimensional (2D) $MoS_2$ and $MoS_2/WSe_2$ and thereby enable the characterization of working devices based on 2D materials. We compare the thickness measurements with EDS to results from atomic force microscopy measurements. We also show how we can use electron backscatter diffraction (EBSD) to address fabrication challenges of 2D materials. Results from EBSD analysis of individual flakes of exfoliated $MoS_2$ obtained using the Nordlys Nano detector are shown to aid a better understanding of the exfoliation process which is still widely used to produce 2D materials for research purposes.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.16-23
• /
• 2007

An experimental investigation with diode laser system was carried out to study the effect of surface heat treatment on the die materials(SM45C, SKD11, SK3). The surface heat treatment characteristics of the laser beam are evaluated using hardness tests, optical microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy(EDS). Results indicated that the beam size, focal length, feed rates are changed surface hardened characteristics. SM45C is higher hardness than other materials and composed to martensite grain at hardened zone, whereas other materials(SKD11, SK3)are low hardness than expected and composed to austenite and allayed martensite at hardened zone. The intensive X-ray diffraction patterns of (110)-(200)-(211) is detected hardened surface and the hardened surface distributed plenty of carbon density than metal zone.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.173-177
• /
• 1998

In this paper, we reported an outbreak of fire hazard of ballast for fluorescent lamp. The surface structure and composition of ballast coil analyzed by using metallurgical microscope, scanning electron microscope(SEM) and energy dispersive x-ray spectroscopy(EDX). The surface of molten mark appeared columnar structure and void. EDX analysis indicated that the molten mark spectra were composed not only of the corresponding original spectra but also of several new lines.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.19-25
• /
• 2009

Polymerization of tetraethoxysilane on a glass substrate was investigated by remote microwave plasma using argon with portions of nitrous oxide as carrier gas. Transparent layer like a thickness of 0.5 ${\mu}m$ 3 ${\mu}m$ were obtained, differing in chemical composition, depending on plasma power and treatment time as well as on ageing time. In general the milder the treatment and the shorter the ageing was, the higher was the content of organic structural elements in the layer. We have identified that the chemical structure of our samples composed of mainly Si O and Si C groups containing aliphatics, carbonyl groups. These results were obtained by X ray photon spectroscopy, Fourier transformed infrared spectroscopy, and scanning electron microscope combined with Energy dispersive X ray spectroscopy.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.155-166
• /
• 2004

국내 연약지반 활용을 위한 효율적이고 경제적인 안정처리 공법의 선정과 설계 및 시공을 위해서는 대상지반의 특성을 파악하는 것이 대단히 중요하다. 본 연구는 시화지구 연약점토의 물리적, 역학적 특성과 광물학적 특성을 파악하여 연약점토의 물리적, 역학적 특성과 광물학적 특성과의 상관관계를 알아보는 데 그 목적이 있다. 본 연구에서 는 연약점토의 광물학적 특성을 파악하기 위하여 X선 형광분석, X선 회절분석, 주사전자현미경분석과 에너지분산미분석 실험을 실시하였으며 시화지구 연약지반의 시추조사결과, 실내시험 및 현장시험결과와의 상관관계를 알아보았다. 또한 시화지구 연약점토의 특성을 양산과 군산 지역 연약점토의 특성과 비교하였다.

• 암석학회지
• /
• 제6권2호
• /
• pp.88-95
• /
• 1997

High pressure X-ray diffraction study was carried out on a polycrystalline graphite to investigate the phase transition(s) at room temperature. Energy dispersive X-ray diffraction method was employed using a Mao-Bell type diamond anvil cell with an Wiggler synchrotron Radiation at the National Synchrotron Light Source. Sodium chloride power was used as the internal pressure sensor for the high pressure determinations as well as the pressure medium for quasihydrostatic pressure environment. Graphite transforms into a hexagonal didose not agree with the previously reported observations and this phase persists when pressure is released down to 0.1 MPa. This result dose not agree with the previously reported observations and this discrepancy would be due to the kinetics in phase transition as well as the uniaxially oriented pressure field in the diamond anvil cell.

• 한국결정학회지
• /
• 제7권1호
• /
• pp.20-29
• /
• 1996

(Sr1-xCax)CuO2 단결정을 융제법으로 제조하고 단결정 X-선 회절법을 이용하여 그 결정구조를 밝혔다. 이 화합물의 결정축계는 사방정계(orthorhombic system)이며, 공간군은 Cmcm(63), 그리고 격자상수 a, b, c는 각각 3.4645Å, 16.1417Å, 3.8727Å이었다. (Sr1-xCax)CuO2 화합물에서 Sr대신 치환되는 Ca이온의 한계를 구조적인 관점에서 연구하였다. 이를 위해 X-선 회절(CAD4), energy dispersive X-ray fluorescence (EDAX) and electron probe micro-analysis (EPMA) 등을 사용하였다. Ca가 치환됨에 따른 Cu-O 결합길이의 변화로부터 Ca의 치환한계를 결정하였는데 그 한계치는 Xca≒0.73이었다.