• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.171-180
• /
• 2001

Collision accident reconstruction algorithm are developed based on the deformation shape and severity of a car body. At first, the body stiffness equation representing the force-deformation relationship is derived using finite element analysis for head on collision of two cars. The database of deformation shapes and energies is constructed for five different collision configurations; each configuration contains three velocity conditions. Deformation shapes are obtained using a curve fitting method and result in cubic polynomials. Deformation energies are calculated using a stiffness equation and deformation data. Three algorithms are developed to reconstruct collision configuration compared with constructed database. The developed algorithms show reasonably good performance to find collisions conditions for some test problems.

• Journal of Biosystems Engineering
• /
• v.20 no.2
• /
• pp.141-150
• /
• 1995

땅콩을 대상으로 하는 각종 농산가공기계의 개발 및 최적 작동에 필요한 땅콩 자실의 물리적, 기계적 및 공기 역학적 성질에 대한 연구가 수행되었다. 영호, 올, P.I. 314817의 3 가지 품종에 대해 땅콩 자실의 형상, 각부 칫수, 진밀도, 산물밀도 및 종실율이 측정되었으며, 땅콩자실에 대해 압축실험을 실시함으로써 자실이 파괴될 때의 힘, 변형량, 그리고 단위 체적당 최대 흡수 에너지인 터프니스 계수를 측정하여 기계적 성질로서 제시하였다. 공기 역학적 성질로서는 땅콩 자실과 종실의 종말속도 및 항력계수가 측정되었다. 1. 땅콩 자실의 기하학적 형상은 수원체로 모형화할 수 있었다. 2. 진밀도는 땅콩 자실의 경우는 515-620 $kg/m^3$, 종실의 경우는 960-1,090 $kg/m^3$, 의 값을 보였다. 3. 대합면이 수평인 자세에서의 파괴력은 영호가 61.9 N, P.I. 314817은 71.5 N, 올 땅콩은 84.8 N였으며, 터프니스 계수는 각각 30, 43, 72 kN-$m/m^3$, 의 값을 보였다. 모든 품종과 함수율에서 파괴력과 터프니스 계수는 대합면이 수직인 자세에서보다 수평자세에서 더 큰 값들을 보였다. 4. 땅콩 자실과 종실의 평균 종말속도는 각각 8.7-9.9 m/s, 10.0-11.6 m/s 범위였다. 종말속도는 진밀도와 직선적인 관계가 있었으며 품종과 형상에 따른 뚜렷한 종말속도의 차이는 보이지 않았다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.177-185
• /
• 2000

The deformation characteristics is one of the major factors to resume the crash configuration in collision accident reconstruction. Crash analysis are carried out using finite element method and body stiffness equations representing force-deformation relationship are derived, Two different crash conditions : 1) frontal barrier impact 2) frontal impact between cars are given for the derivation of the equations. The stiffness coefficient of equation by method 2) is larger than that by method. 1). Crash analysis between two vehicles is accomplished with three crash angles and three velocities for each angle condition. The deformations are measured for six selected points and deformation energies are calculated using the derived equations. Equation by method 2) results in better estimation of deformation energy than that by method 1) for all crush configurations. The estimated energies can be utilized as one of indices to identify the type of the collision accident result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.247-260
• /
• 2006

In this paper, an analytical method which can describe the structural behavior of prestressed concrete (PSC) bridges reinforced with the unbonded external tendon is developed. Since the unbonded external tendon is directly installed to the deviators while maintaining a straight configuration, it has a different deformation field from that of concrete and accompanies the secondary effect caused by the change of the primary eccentricity between concrete and external tendon. In advance, the friction slip at the deviators is also taken into consideration on the basis of the force equilibrium between the friction force and the driving force. Through correlation studies between experimental data and analytical results, it is verified that the proposed numerical model can effectively predict the structural behavior of PSC beam bridges with comparative precision.

• Journal of Korea Water Resources Association
• /
• v.35 no.2
• /
• pp.195-201
• /
• 2002

In this study, an equation is proposed to estimate the limit velocity for lateral stable bed in a curved channel stream. The stable bed on lateral direction is satisfied when there is no more deformation occurs on the transverse bed slope and non-scouring condition in a bend. A theoretical equation for limit velocity is derived using a transverse bed slope model. So, the limit velocity has its theoretical background in the equilibrium of two forces, lateral shear force at the bed due to longitudinal flow and the corresponding lateral bed shear force. To verify the equation, data from four natural river channels were used. There is good agreement between the calculated values using this equation and the measured values. The corrections in equation was found to be correlated with the averaged particle Froude number.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.653-660
• /
• 2010

The stern tube bearing is installed to the stern tube and stern boss casting by using the method of the force pressured fitting. The adequate value of the interference between the stern tube bearing and casting should be considered owing to the slip. In this study, to review and compare the fitting force and the contact pressure, the theory of thick walled cylinder is considered to clarify the formula which received from the maker. Also the fitting force and contact pressure are calculated by using the standard value of interference, Young's modulus, Poisson's ratio and friction coefficient.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.513-521
• /
• 2009

Recently, the externally prestressed unbonded concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with external unbonded tendon is different from that of normal bonded PSC beams in that the slip of tendons at deviators and the change of tendon eccentricity occurs as external loads are applied in external unbonded PSC beams. The purpose of the present paper is therefore to evaluate the flexural behavior by performing static flexural test according to tendon area and tendon force. From experimental results, before flexural cracking, there was no difference between external members and bonded members. However, after cracking, yielding load of reinforcement, ultimate load, and the tendon stress of external members was lower than that of bonded members. For the relationship of load-tendon stress, the increasing of tendon strain was inversely proportional to the initial tendon force. However, even if the initial tendon force was large, the tendon strain with small effective stress was smaller than that with large effective stress. The concrete compressive strain was proportional to the effective stress of external tendon. From the comparison between test results and codes, the ACI-318 could not consider the effect of tendon force or effective stress, and especially the results of ACI-318 were very small, so it was very conservative. And the AASHTO 1994 could be influenced on the tendon area, initial force and effective stress, but as it was made on the basis of internal unbonded tendon, its results were much larger than the test results. For this reason, the new correct predict equation of external tendon stress will be needed.