• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.132-137
• /
• 2011

A relationship between resisting moment and the structure of an automatic closure device is introduced for analyzing the effect of opening and closing condition on various fire door sizes in the pressurized room for smoke control system. The larger the size of fire door is, the more force is required for reaching to opening and closing conditions and there exists the design range of fire door in the pressurized room reflecting the closing time of fire door, rotative velocity, a relation between rotative angle and force and the efficiency of the automatic closure device.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.6-8
• /
• 2005

스프링 조작기는 초고압 GIS, GCB 등의 개폐장치를 구동시키는 조작 장치로서 동작 중 부품에 큰 충격력 및 힘이 작용하여 파손되는 경우가 발생한다. 이에 개발 설계 단계에서 스프링 조작기의 구조적 건전성 확보를 위해 각 부품에 작용하는 힘을 예측하여 평가, 검증하는 해석 및 시험 기술이 요구된다. 본 논문에서는 145kV GIS용 스프링 조작기를 ADAMS로 다물체 동역학 해석을 수행하여 추출한 부품의 조인트 반력을 이용하여 응력 해석을 수행하였다. 그리고 그 결과와 응력측정 시험 데이터와의 비교를 통해 해석의 신뢰성을 검증할 수 있었다. 여기서는 한 예로 커넥팅 로드에 대한 신뢰성 평가를 시행하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.663-668
• /
• 2014

This paper presents a hook-type finger force measuring system with force sensors. The system is composed of a body, two three-axis force sensors, a hook, and so on. The two three-axis force sensors system was specially designed using FEM(Finite Element Method) and fabricated using strain-gages. The sensors measure the finger forces of both normal people and handicapped people in the system, and the forces are combined. The developed hook-type finger force measuring system can measure the pulling finger force of both normal and handicapped people. The pulling force tests of men and women were performed using the developed the system. It is thought that the developed system can be used to measure the pulling force of fingers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.226-232
• /
• 1982

The measurements of the jerking force and the tail beat by hooked carp were carried out using a strain gauge at a fish pond from July to August 1981. The maximum jerking force was sustained for a while in the initial state after a carp was hooked, but the jerking force was gradually decreased as a function of the time elapsed until the fish was utterly exhausted, and it converged to the body weight at last. The results are as follows : 1. The maximum jerking force $F_m(g)$ can be expressed with empirical formula : $$F_m=3.23W+105$$ where W (g) is the body weight. 2. Dynamic change of the maximum jerking force $F_n(g)$ by one tail beat with time $t_{n}(-10T/2{\leq}\;t_n{\leq}10T/2)$ can he induced with the equation as follows : $$F_n=(0.27W-6.52)(|t_n|+C)^{-2.10}$$ where the period T (sec) is given by the following equation with the body weight : T=0.000385W+0.193 3. The jerking force at each of the peak points $F_p$ (g) varies with the time elapsed t (sec) as following equation : $$F_{p}=(2.23W+105)e^{-{\beta}t}+W$$. The value of durability index $\beta$ was nearly zero in the initial state and about 1.7 in the exhausted state at last. 4. It was clearly shown that the change of jerking force by hooked carp was closely related to the tail beat from a paired difference T-test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.459-467
• /
• 2011

Rehabilitation exercises must maintain a patient's interest and permit a quantitative evaluation of the rehabilitation. We have developed a haptic-device system. When users move a grip, the haptic device provides a virtual force that either assists the movement of their arm or working against it. To investigate the functional effect of this system in a rehabilitation program, we used for five subjects with motor-function disorders and measured the grip position, velocity, force exerted on the grip, and EMG activities during a reaching task of one subject. The accuracy of the grip position, velocity and trajectories patterns were similar for all the subjects. The results suggested that the EMG activities were improved by applying the virtual force to the grip. These results can be used for the development of rehabilitation programs and evaluation methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.89-96
• /
• 2016

This paper describes the design of a force measurement and communication system for the force measuring system in industrial robots. The force measurement and communication system is composed of a multi-axis force sensor and a controller for measuring the forces (x-direction force, y-direction force and z-direction force) and sending the measured forces to the robot's controller (PLC: Programmable Logic Controller). In this paper, the force measurement and communication system was designed and fabricated by using a DSP (Digital Signal Processor). An environment test and a grinding and deburring test using an industrial robot with the force measurement and communication system with three-axis force sensor were carried out to characterize the system. The tests showed that the system could safely measure the forces from the three-axis force sensor and send the measured forces to the industrial robot's controller while the grinding and deburring test was performed. Thus, it is thought that the fabricated force measurement and communication system could be used for controlling the force for an industrial robot's grinding and deburring.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.2072-2072
• /
• 2009

최근 연구들에서, 증강 현실(Augmented Reality; AR) 환경에서의 촉각 상호작용에 대한 가능성이 논의되었다. 비젼 기반의 트래킹을 기초로 한 증강 현실 기술은 미리 정의된 2차원 마커(marker)를 이용하여, 카메라로부터 획득된 실시간 영상 위에 가상 물체를 증강한다. 그러나, 카메라로부터 획득된 데이터는 몇몇 오차 요인들, 예를 들어 마커의 위치를 인식하는데 나타나는 오차, 카메라 안에 존재하는 센서 잡음 등으로 인해서 마커 잡음(마커를 인식하면서 나타나는 잡음)이 불가결하게 발생하게 된다. 이러한 이유로 인해서, 사용자가 한 손에는 마커를, 다른 한 손으로는 촉감 장치를 이용하여, 마커에 증강된 물체를 만질 때, 마커 잡음은 힘의 떨림(force trembling)을 발생시킨다. 심지어, 이러한 현상은 정지된 마커에 증강된, 마커가 움직이지 않는 상황에서도 발생한다. 게다가, 마커 위에 증강된 물체가 약간 빠른 속도로 이동하게 될 경우, 측정된 이동 거리는 연속적인 프레임(frame)들 간의 불연속적일 수 있다. 만약 사용자가, 대략 30Hz로 위치와 방향이 갱신되는 가상물체를 촉각적으로 상호작용하려 한다면, 계산되는 반력은 급작스런 힘의 변화를 생성하게 될 수도 있다. 이러한 현상을 극복하기 위해서, 마커 잡음을 최소화하기 위해서 정적 임계값(constant threshold)을 이용할 뿐만 아니라, 보간법을 같이 사용한 방법이 있었다. 하지만, 이러한 방법은 정적 임계값을 이용하고, 영상 프레임 갱신 속도와(video frame rate)와 촉각 프레임 갱신 속도가 일정하다는 가정을 사용하였기 때문에, 여전히 힘의 불연속적인 발생이 나타난다. 따라서, 이 논문에서는 두 가지 방법을 이용하여 증강 현실 내에서, 발생할 수 있는 힘의 불연속적인 변화를 보정하는 두 가지 방법, 잡음 제거를 위한 확장된 칼만 필터(Extend Kalman Filter)와 영상과 촉각 갱신 속도 차이에 따른 갑작스런 힘의 변화를 제거하기 위한 적응적 외삽법(Adaptive Extrapolation method)을 제안한다.

• Composites Research
• /
• v.27 no.1
• /
• pp.31-36
• /
• 2014

This paper presents the slip behavior of composite fabrics by high speed resin flow in high pressure resin transfer molding. In order to observe the fiber deformation behavior, we constructed the measuring equipment for friction coefficient between fiber and mold, and the monitoring system for deformation of fiber preform in high-pressure RTM process. Coulomb friction coefficient and hydrodynamic friction coefficient between fiber preform and mold were measured and the external force induced by fluid flow causing the deformation of fiber preform was measured. Friction force calculated by friction coefficient and the external force upon fiber deformation were compared, which showed that preform deformation occurred when the external force was bigger than the friction force. The slip behavior of the fiber preform was mainly influenced by the volume fraction of fiber preform and the friction coefficient.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2021

This paper presents the control logic for the momentum wheel and gimbals in the CMG system. First, the design of the control logic for the momentum wheel is described in consideration of the power consumption and stability. Second, the design of the control logic for the gimbals considering the resonance of the vibration absorber and stability is explained. Third, the measurement configuration for the force and torque generated by the CMG is described. Fourth, the results of the frequency and time response test of the momentum wheel and gimbals are shown. Last, the measurements of the force and the torque generated through the CMG are explained.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.627_628
• /
• 2009

도어락 스위치(Door-lock switch)는 드럼세탁기, 식기 세척기등 회전이나 열이 발생되어 작동 할 때 임의로 열지 못하도록 하는 가전제품에 쓰이는 도어안전잠금장치로 드럼세탁기에서는 없어서는 안 되는 중요한 부품 중의 하나이다. 드럼 세탁기 도어는 소비자가 사용 할 때 항상 느낌을 가지는 부분으로 안전성과 동시에 감성이 뒤따르는 부품이기도 하다. 본 논문은 드럼세탁기의 도어에 감성과 관련된 요소들을 조사하였으며, 도어락 스위치의 기구적인 구조들을 파악한 뒤 드럼세탁기에 장착하였을 때 열림력, 닫힘력을 측정할 수 있는 지그와 소프트웨어를 제작하여 측정한 힘의 그래프를 분석하고 사용자에 의해 평가한 후, 드럼세탁기 도어락 스위치의 구조에 따른 감성에 차이점을 찾아보고 최적의 설계를 위한 요소를 제시하였다.