• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.4
• /
• pp.1-9
• /
• 2010

Fuel shutoff valve of a gas generator controls propellant mass flowrate of a rocket engine, by using pilot pressure and spring force. The developing fuel shutoff valve can be self sustained even though pilot pressure is removed in an actuator. Therefore, it is necessary to analyze the characteristics of the forces with respect to the opening and closing of the valve in order to evaluate its performance. In light of this, the valve has been designed to adjust the control pressure for the opening of the poppet and to determine the working fluid pressure at which the valve starts to close. This paper also has been designed dynamic model using the AMESim and predicted flow coefficient of the valve by Fluent CFD analysis. Various results from the prediction and the analysis have been compared with experiments. Finally, dynamic characteristics of the valve have been verified with experimental results.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.27-34
• /
• 2020

Use of axisymmetric shell element for the structure increases the efficiency and accuracy in finite element analysis of the interaction between the ground and the structure. This paper derived the force balance equation and the moment balance equation for an axisymmetric shell element based on Kirchhoff's theory. The governing equation for the axial deformation used the isoparametric shape function in the Galerkin formulation, and the governing equation for the shell bending used the higher-order shape function. The developed axisymmetric shell element was combined with Geo-COUS, a geotechnical finite element program for the coupled analysis with the ground. The accuracy of the developed element was confirmed through the example analyses of the circular plate and the liquid storage tank. And the energy balance equation for the axisymmetric shell element is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.43-48
• /
• 1991

최근 항공기 및 자동차 관련산업 등의 급속한 발전에 따라 정밀도가 높고 결함이 없는 제품을 단기간에 생산하기 위한 금속성형공정의 가공법 및 해석 방법에 대한 연구가 활발하다. 금속성형공정에서의 주된 공학적 관심사는 원하는 형상의 제품을 내부결함없이 생산하기 위한 성형하중과 금속유동의 예측 및 응력분포 등이다. 그러나 해석적인 방법으로 실제 금속성형문제에 대한 완전해를 얻는 것은 매우 어려우므로 실제해에 근접한 근사해를 구한다.(중략)

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.896-897
• /
• 2015

본 논문에서는 IPM type BLDC 전동기의 진동 저감 방안에 대해서 연구하였다. 전자기적 진동 발생원 중 주된 요인이 되는 코깅 토크와 반경방향 힘의 불평형에 대해서 노치를 설치하여 코깅토크를 최소화한 모델과 반경반향의 힘인 가진력을 평형화한 모델의 설계를 수행하였다. 각 모델에 대한 주파수별 진동원을 분석하고 진동 실험의 결과와 비교하여 분석하여 그 타당성을 입증하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.515-518
• /
• 2005

플립칩과 같은 정밀한 전자부품을 일반적인 표면실장방법에 의해 고속으로 장착 시킬 경우에는 칩의 표면이 PCB 실장면에 닿는 순간 접촉력(Contact Force)이 크게 발생한다. 과도한 접촉력에 의해 솔더 볼의 표면에 크랙이 가거나 솔더 볼이 변형되어 좁은 피치 내에서 인접해 있는 솔더 볼이 서로 붙는다든지, 또한 리드가 손상된다든지 하는 등과 같은 현상이 발생하여 표면 실장 불량의 원인이 될 가능성이 높아진다. 또한, 유연한 재질로 구성된 PCB 실장면에 과도한 힘을 가할 시에는 실장면의 국부적인 탄성변형이 발생하여 칩의 장착위치가 변경되어 정확한 위치에의 장착이 어렵게 된다. 따라서 CSP 나 플립 칩과 같은 고정도 칩을 고속으로 정확한 위치에 실장하기 위해서는 칩을 장착할 때 플립칩과 실장면의 자세를 평형상태로 제어할 필요가 있으며, 특히 발생하는 충격을 감소시키기 위한 충격 제어와 충돌 후 일정한 접촉력 유지를 할 수 있는 힘 제어가 필수적임을 알 수 있다. 따라서 본 논문에서는 상기와 같은 자세제어 및 힘제어를 요구하는 플립 칩 장착을 위한 엑츄에이터와 거리/힘 센서 시스템을 개발하였다. 제안된 시스템의 효율성을 입증하기 위해 다양한 환경에서 성능시험을 수행하였으며, 그 결과 제안된 시스템의 만족할 만한 실험결과를 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.409-418
• /
• 1988

Steam turbines, gas turbines, multistage centrifugal compressors are operated over the range of the first critical speed. In these rotors flexible rotor balancing technique is necessary. In such balancing, influence coefficients are measured by rotating a rotor with trial weight. But for the large rotor, the measurement of influence coefficient takes much time and it reduces the cost efficiency. In this paper the new influence coefficient with rotation of rotor is proposed. First the theoretical background of the method is presented and it is applied to the simple flexible rotor model. Then the experiments are performed and the results of presented method are compared with those of analytical method. By using the obtained influence coefficient, balancing of the flexible rotor is performed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.101-109
• /
• 1981

균일 인장하중하에 있는 고체 내부에 고립된 제 1형 탄소성 크랙의 반취성 파괴를 경사슬립밴드모델(inclined slip band model)로서 연속크랙전위(conticuum crack dislocation) 및 연속격자 전위(continum lattice dislocation)을 이용하여 이론적으로 연구하였다. 크랙전위 및 격자전위에 관한 힘평형을 나타애는 연립특이적분방정식의 해는크랙전위 및 격자전위에 관한 적정밀도함수를 가지고 특이함을 해소하는 조건을 부가하여 얻는다. 이특이항 해소조건의 타당성은 처음으로 소성영역의 크기를 그 판단기준으로 검토되었으며, 그결과 합당한 것으로 확인되었다. 또한 상기방법으로부터 산출된 COD는 소규모 성역을 넘어서도 선형적으로 .KAPPA.$^{2}$.EPSILON..sigma.$_{Y}$ 에 따라 변화함을 알게 된다. 상기모델에서 위축적분경로(Shrunk path) 상의 J 적분치를 J=.delta..sigma.$_{Y/}$sin2.theta.의 형태로 유도하였는데, 이것은 J 적분에 관한 Eshelby의 힘개념을 구체적으로 표현한다: J는 크랙전파방향으로 탄소성크랙정점에 작용하는 가상적인 힘이며, 1/2 J의 한 슬립편면상에서의 분력은 그 슬립정면사으이 보든 격자전위에 작용하는 전단력의 총화와 같다. 같다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.669-675
• /
• 2011

A constant hanger is a device for supporting pipes in plants. It supplies a constant force to a supporting pipe even if the pipe moves because of thermal expansion. In this paper, we propose a method for designing the contour of a cam for a constant hanger. It has been shown that the contour of a cam must satisfy the geometrical relation of the cam, the force balance equation for the load tube, the relation between the side spring compression and the cam rotation angle, and the moment balance equation for the cam. A calculation procedure to solve these equations simultaneously is proposed, and a constant hanger is designed successfully.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.1-11
• /
• 2002

A mathematical model is proposed to analyze the force; acting on the hard contact lens fitted on the cornea. The model incorporates the nonlinear equations and their numerical solution program, based on the formulations of surface tension force arising from the capillary action in the tear-film layer between the lens and cornea. The model simulates how the adhesion between lens and cornea varies according to the base curves and diameters of the lenses. When the spherical lens is fitted on the spherical cornea it is to rotate downward due to the weight of lens itself until it reaches an equilibrium position along the cornea where the counter(upward) moment caused by net force between the upper and lower portion of the periphery of lens. It is found that both the adhesion and displacement of lens along the cornea, where the gravity of lens balances the capillary-induced upward force, increases rapidly as the base curve of lens increases, i.e., as the lens gets flatter, while the increase in the diameter of lenses has resulted in the less increase in the rotation and adhesion. With the base curve and diameters of lenses being remained constant the increase in surface tension of tear film yields the increase in the adhesion between the cornea and lens while the initial rotation of lens is inversely proportional to the surface tension of the tear film.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.