• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.57-65
• /
• 2000

Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1033-1040
• /
• 2005

Protein function of ovotransferrin with various pH and temperature, and its antimicrobial characteristics were determined. Foaming ability of ovotransferrin was high in alkali condition (pH 11), then diminished as time follows. In acidic condition (pH 3.0), very little amount of foam was produced and disappeared promptly in 30min. However, neutral condition (pH 7.0) was revealed as the best area for foam production and foam stability of ovotransferrin. Temperature effect on foam stability of ovotransferrin showed that the highest foam was produced at 60℃. Ovotransferrin was shown weak antimicrobial activity against E. Coli, S .typhi, P. aerug and Candida albicans at dose of 12.5mg/ml and 25mg/ml. Anti-microbial effect of ovotransferrin with either lysozyme or albumine on pathogenic bacteria and fungi shows that the most effective dose was 25mg/ml, especially on S. typhi and C. albicans.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.137-143
• /
• 1991

This research was conducted to investigate the treatment effects of the experimental product of an oxidatively treated animal wastes such as feces of cow and pig on the growth and yield of corn, soil fertility parameters, nutrient uptake by corn, and in situ dry matter digestibility. The results are summarized as follows. (1) Growth of corn was favored by treatment of the experimental products as compared to the control. Highest yields were obtained at treatment levels of 2,000 and 2,500kg/10a for the experimental products derived from cow and pig feces, respectively. (2) The contents of soil organic matter were increased 7-41% and 4-60% with treatments of experimental products from cow and pig feces, respectively, as compared to the control. The available soil phosphorus levels were increased significantly with the treatments. Treatment of product from the cow feces resulted in a slight increase of the potassium adsorption ratio (KAR). (3) No significant difference was observed in uptake of total nitrogen and phosphorus between the treatments and the control. Uptake of cation by corn was in the order of $K_2O$ >CaO>MgO. (4) In situ dry matter digestibility ratio was increased with Incubation time. However, no significant difference in digestibility was detected for the corn samples produced by treating different levels of the experimental products.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.81-88
• /
• 2016

Limonene is orange flavored natural material that is mainly contained in mandarine and lemon peels. D-limonene was extracted from cold-storaged mandarine peel by using Soxhlet extractor at $120^{\circ}C$ for 2 hours with ethanol as solvent. Henry constants of d-limonene and impurity were calculated as $H_{Lim}=8.55$ and $H_{imp}=0.223$ from the result of HPLC analysis. 4-bed SMB of limonene simulation with $0.46{\times}25cm$ columns was conducted by using Aspen chromatography program. Then effective condition for purity was found by changing $m_2$ and $m_3$ values in triangle diagram. The highest purity was 98.59% at $m_2=2.57$, $m_3=9.55$. For this case, feed, desorbent, extract, and raffinate flow rates were 1 mL/min, 1.19 mL/min, 0.857 mL/min and 1.34 mL/min, respectively. Scale-up simulation was also conducted by increasing column diameter from 0.46 cm to 1.6 cm for getting the same efficiency. The increased flow rates were 12 mL/min, 14 mL/min, 10 mL/min, and 16 mL/min for feed, desorbent, extract, and raffinate. It was possible to scale-up with maintaining same limonene purity because linear isotherms of limonene and impurity were assumed.

• Clean Technology
• /
• v.9 no.4
• /
• pp.197-206
• /
• 2003

We performed removal of aromatic compounds, benzene and toluene, from soil and zeolite using supercritical carbon dioxide. Extraction was performed at $50^{\circ}C$ and 27.7 MPa with changing the extent of pollutant concentration and the results were compared and analyzed. Experiments were carried out using flow method and high pressure extractor of 1.27 cm in diameter and 25cm in length was used. The pollutants were sampled every ten minutes and their concentrations were analyzed with GC/FID. As a result, highly contaminated sample followed solubility/elution model and slightly contaminated sample followed desorption/kinetics model. At the same condition benzene was extracted faster than toluene. In the case of zeolite, more time is required to extract pollutants than soil. This phenomena was due to high adsorption capacity of zeolite. In the case of highly contaminated soil, we could correlate experimental data using simple Brady's fixed bed extractor model. But in the case of slightly contaminated soil, that was governed with desorption/kinetics model, there was some errors.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.357-366
• /
• 2017

Natural pigments are materials that express color and have been used in foods, cosmetics, medicine and so on. Since natural pigments are extracted from animals and plants, they are not uniform in size. Red pigments in particular are more lipophilic than other color pigments and tend to aggregate easily in aqueous solutions which make it difficult to reproduce the specific color due to size change. Found to be an allergen and the growing aversion for it to be used in foods, cochineal pigment, an animal pigment used for red pigments is being used less. In this study, red vegetable pigment lycopene extract and gardenia yellow was made uniform in size by ball-milling, then asymmetrical flow-field flow fractionation (AsFlFFF) and dynamic light scattering (DLS) were used to measure the size, and a color meter was used to confirm the color. Experimental results showed that the pigment particles were large in size and size distribution was wide before milling, but the size of the particles decreased and size distribution narrowed after milling. Color meter measurements showed that as the milling time increased, the size of the pigment particles decreased and the brightness, redness, and yellowness increased indicating a bright red color.

• Journal of the Korean Chemical Society
• /
• v.47 no.4
• /
• pp.363-369
• /
• 2003

Selenized yeast (Se yeast) containing $0.1{\%}$(w/w) of selenium was obtained when the yeast was incubated at a selenium concentration of 1$1.14{\times}10_-3 M$ in rich medium. After washing several times, the inorganic selenium on the cell wall was confirmed with MBRT. There was no indication of inorganic selenium on the cell wall when the blue color in MBRT was stayed for 15 minutes. The selenized yeast was sonicated, then the selenium contained protein was obtained after salting out by ammonium sulfate at the concentration $80{\%}$ saturation. The seven protein bands were seperated by SDS-PAGE and the selenium concentration in protein was measured by ICP-AES. Analytical data showed that the large expressed protein band contained a relatively large amount of selenium. The proteins of the 47kDa was contained the concentrations of 69.5 ${\mu}$ Se/g of most many content. The protein (47 kDa) was seperated from PVDF membrane by tank-electroblotting. The isolated protein was hydrolyzed under acid condition and reacted with PITC. The derivatives of amino acids were analyzed by HPLC and compared with the data obtained from regular yeast. The resulting selenium-yeast was analyzed with the selenomethionine concentration of $2{\%}$ comparaed with general amino acids. The goal of this study is to analyze the selenium concentration in protein bands and measure the degree of biotransformation of selenomethionine in a specific protein.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.245-251
• /
• 2002

We prepared γ-alumina beads using the amorphous alumina, obtained by fast calcination of gibbsite, and its were immersed in aqueous solution of the mixture of 21.87% nitric acid and 28.57% acetic acid. The beads thus were hydrothermaly treated at 200$^{\circ}$C for 3h, and were investigated changes of crystal, pore characteristics, $N_2$ adsorption and desorption isotherms, mechanical strengths and thermal resistance. Acicular platelet crystals of 0.1∼0.3${\mu}$m were transformed into acicular boehmite crystals of 1∼2${\mu}$m having the same crystal structure. Through this changes, we found that reversible phase transformation due to hydrothermal reaction took placed between boehmite and ${\gamma}$-alumina. In comparison to the ${\gamma}$-alumina bead before hydrothermal treatment, $N_2$ adsorption capacity was increased from 450㎖/g to 670㎖/g, and pore volume between 100${\AA}$ and 1000${\AA}$ was increased form 0.15㎖/g to 0.77㎖g, and mechanical strength was increased form 1.4MPa to 2.2MPa. Also, it showed the remarkable thermal resistance which sustained ${\theta}$-alumina crystal structure and pores between 100${\AA}$ and 1000${\AA}$ at 1000$^{\circ}$C in 40vol% steam.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.61-69
• /
• 2014

Carboxymethyl-${\beta}$-cyclodextrin (${\beta}$-CMCD), as a biodegradable surfactant with hydrophobic and hydrophilic properties, has potential advantages of being applicable to the simultaneous treatment of multiple contaminated soils. In this study, the desorption behaviors of r adionuclides such as cobalt (Co), strontium (Sr), and cesium (Cs) from the soil contaminated with them were experimentally investigated and the effectiveness of CMCD as a desorbent was evaluated. The desorption equilibrium of used radionuclides could be achieved within 1~3 hr and the desorption ratio from kaolin was higher than that from natural soil. The addition of CMCD of 2 g/L increased the desorption ratio by 5~20 % and the desorption ratio of used r adionuclides was shown in the order of Co > Cs > Sr. The experimental desorption data were fitted successfully by pseudo-second order kinetic model and the desorption rate of the r adionuclides was shown in the order of Cs > Co > Sr. Hysteresis between adsorption and desorption of the r adionuclides, as shown in the order of Sr > Co > Cs, increased as the desorption rate decreased. Consequently, it could be considered that the desorption rate was one of the significant factors of the hysteresis. The addition of CMCD as desorbent increased the amount of desorbed radionuclides and decreased the hysteresis. However, the CMCD could not completely desorb the radionuclides from soils even though the excess of CMCD was added.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.149-155
• /
• 2001

A new analytical method of cyanobacterial toxins, i, e, microcysins was deveeloped using supercritical fluid extraction(SFE). The microcystins mcluded in the study are sparsely soluble in neat supercritical fluid CO$_2$ However, the microcystins were successfully extracted with a temary mixture(90% CO$_2$,9.0% methanol 1.0% water) at 40$^{\circ}$C and 250 atm. The SFE method developed in this study has several advantages over solid-phase extraction(SPE) sample preparation for the analysis of microcystins. Sample handling steps are minimized thus reducing possible losses of analytes and saving analysis time. No clean-up steps are employed in this SFE method. Althouhgh many methods have been described for microcystim RR and LR, the method using solid-phase extraction with ODS cartridges is the most commonly used. However, the adsorbing power of ODS caridges for microcystins is weak, so we have attempted to use a more polar CN cartridge, to increase the adsorbing power for microcystins. Lyophilized cells(100mg) were wxtracted with 5% (v/v) acetic acid. The extract was centrifuged and then the supernatant was applied to a CN cartridge. The cartridge which contained microcystins was rinsed with 5 ml of water and 5 ml of 0.5 M acetic acid. followed by 5 ml of 5% acetonitrile in water , and were determined by HPLC. Better recoveries and chromatogram were observed than with ODS cartridge.