• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.59-67
• /
• 2014

The amount of the contaminants that can be adsorbed on the drain was evaluated for the effective remediation of the contaminated soil, and the contaminants adsorptivity of the drain was evaluated by comparing the isothermal adsorption model after carrying out the contaminants adsorption test of the reactants coated on the surface of the drain. The reactant used in the experiment is a natural zeolite, and the contaminants are copper, lead and cadmium. The results that Freundlich and Langmuir adsorption isotherm model are compared to the adsorption amount according to the change of the initial concentration by the contaminants. As a result of the component analysis, because Si, Al and O are contained approximately 28%, 11% and 48%, respectively, it is identified that the material coated on the surface of the drain is the component of the zeolite which is the reactant for the adsorption of the heavy-metal (Cu, Pb, Cd) contaminants. The heavy-metal adsorption kinetic of the zeolite which is the reactant was decreased in order of lead, copper and cadmium. The important factor of the performance evaluation of the adsorbent is the reaction rate, and if zeolite is used as the reactant in the relationship between the maximum amount of adsorption and reaction rate, it can be utilized as the design factor that determine the removal order of the complex heavy-metal. In other words, because the maximum adsorption quantity of lead is smaller compared to copper but the reaction rate is relatively fast, it can be primarily removed, and copper can be removed after removing the lead. It was analyzed that Cadmium can be finally removed after that other heavy-metal is removed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.41-52
• /
• 1995

혼합상태에서 유기화합물들이 토양에 흡착하는 성질에 관해서 5개의 유기화합물(페놀,2,4-디크로로페놀, 2,4,6-트리크로로페놀, 부루신, 따이오유리아)과 2종류의 토양을 이용하여 연구하였다. 일반적으로 따이오유리아를 제외하고는 한가지 물질이 혼합상태에 있는 다른물질이에 의 흡착력이에 제약을 받아서 단독으로 있을때 보다 흡착율이 낮았다. 따이오유리아는 단독인 경우보다 혼합상태일 때 더 많은 흡착을 보였는데 이는 혼합상태에서 오히려 흡착이 증가할수도 있음을 나타낸다. 혼합이 흡착에 비치는 영향은 페놀의 혼합상태와 단독상태에서의 흡착상태를 여러가지 형태로 비교하여 검토하였는데 산성이고 유기물질이 많은 토양보다 혼합으로 인한 흡착의 억제 효과가 뚜렷하였다.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.308-310
• /
• 2001

유기물질이 오랜 기간동안 고온 고압하에서 탄화작용을 받아 생성된 천연흑연은 단위구조가 탄소육각망평면(炭素六角網平面)이 평행하게 배열된 층상으로 전기전도도 및 윤할성이 우수하나 소수성이 매우 강하며 표변화학적 특성이 거의 없기 때문에 다른 물질과 표면흡착이 매우 어려운 물질이다. 따라서 본 연구에서는 흑연의 표면특성을 변화시키고자 유기물(ABDM)을 흡착시키고 표면흡착 매커니즘 및 표면특성을 해석하였다. 흑연 입자 표면 위의 ABDM흡착은 두 단계의 서로 다른 게에서 이루어졌다. 첫 번째 단계는 흡착 초기 흑연입자와 ABDM의 표면전위 특성차이에 의한 1차 흡착으로 흑연표면 소수성이 더욱 증가하는 상태이고, 두 번째 단계는 1차 흡착된 ABDM 과 용액중의 ABDM chain 상호간의 steric 작용에 의한 2차 흡착이었다. 2차 흡착이 완료된 흑연입자 표면은 ABDM 이중층을 형성하게 되고 이에 따라 흑연의 표면전위 특성을 변화시킬 수 있었다.

• Clean Technology
• /
• v.14 no.1
• /
• pp.47-52
• /
• 2008

Among various mass transfer models to express adsorption rates for any adsorption processes, the linear driving force (LDF) model is used most. The present investigation aims at finding whether this model may be applied to real adsorption process for separation and removal of benzene. Comparison of numerical simulation results calculated by the LDF model with experimental data allowed us to find the mass transfer coefficients that are most appropriate for a specific adsorption process. Various breakthrough curves were obtained from experiments performed at many different temperatures and pressures, which in turn produced suitable mass transfer coefficients. These dependencies of mass transfer coefficient on temperature and pressure were represented by an Arrhenius type- and a power law type empirical equation, respectively.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.121-138
• /
• 1995

The Langmuir competitive model and the IAS(ideal adsorption solution) model were eveluated and compared in a multisolute adsorption study using five organic compounds (phenol, 2, 4-dichlorophenol, 2, 4, 6-trichlorophenot brucine, and thiourea) and two soils. The chemicals were evaluated individually and in mixtures. In general, the IfS model predicted the equilibrium concentration of a chemical in a mixture better than the Langmuir model. The Langmuir model underestimated the sorption of phenol when the concentration of another compound in a mixture with phenol was high. Neither of the models predicted satisfactorily the equilibrium concentration of thiourea in the mixtures. Thiourea is an aliphatic compound while the other four chemicals are aromatic compounds.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.8
• /
• pp.39-44
• /
• 2014

Effects of operating parameters on the breakthrough properties of Pb(II) by $Mn_3O_4$ coated activated carbon prepared by supercritical technique were investigated through fixed-bed column experiments. The mass transfer zone and equilibrium adsorption capacity were enhanced about 2.8 times for Pb(II) by $Mn_3O_4$ coating onto activated carbon. Increase of bed height enhanced the residence time of Pb(II) in adsorption zone, giving the higher breakthrough time, mass transfer zone and equilibrium adsorption capacity. Increase of flow rate reduced the residence time and diffusion of Pb(II) in adsorption zone, therefore decreased the equilibrium adsorption capacity. The higher inlet concentration of Pb(II) decreased the breakthrough time and mass transfer zone through the promotion of Pb(II) transfer onto adsorbent.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.457-463
• /
• 2013

The removal of sulfonamide antibiotics (SAs) by activated carbon was investigated by using granular activated carbon (GAC) tests and density functional theory (DFT) simulations. The GAC absorption tests show the removal efficiency of 68.4~90.7% and 99.0~99.9% in 1 and 24 hours, respectively. In both GAC tests, the removal efficiency of sulfamethazine (SMZ) was the highest followed by those of sulfathiazole (STZ) and sulfamethoxazole (SMTZ): SMZ > STZ > SMTZ. In DFT adsorption simulations, we found that the 4-aminobenzenesulfonamide parts of SMZ and STZ and the 3-methyl-1,2-oxazol-5-amine part of SMTZ are preferentially adsorbed on the edges of graphene model, provided that the adsorbates keep their structures without dissociation upon adsorption process. The adsorption energies of SMZ, STZ, and SMTZ are -4.91, -4.64, and -4.62 eV, respectively. This adsorption strength (SMZ > STZ > STMZ) agrees with the trend of the removal efficiency of SAs by GAC. In addition, dissociative adsorption configurations of SAs are discussed.

• Ecology and Resilient Infrastructure
• /
• v.6 no.2
• /
• pp.128-135
• /
• 2019

This study evaluates the effect of dissolved effluent organic matter (SE-dEfOM) from sewage wastewater treatment plants on the adsorption and estrogenic activity of bisphenol A (BPA). Specific ultraviolet absorbance and fluorescence index analyses indicated that SE-dEfOM was mainly microbially derived non-humic substances differed from Suwannee River natural organic matter (SR-NOM) as reference. Both Langmuir and Freundlich models successfully explained the adsorption of BPA onto both SE-dEfOM and SR-NOM. Additionally, the SE-dEfOM showed higher binding capacities and affinities for BPA than those of SR-NOM, resulting in better reduction of the estrogenic activity of BPA. These findings suggest that the binding and toxicity of BPA are largely dependent on the source of organic matters.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.195-204
• /
• 2017

For evaluation of adsorption characteristics of heavy metals, precipitates were collected from stream bottom in the Dalseong mine. The removal of some heavy metals such as As, Cu, and Cd from aqueous solution is studied using a precipitates taken from acid mine drainage. The yellowish brown (Munsell color 8.75YR 5/10) and dark brown (Munsell color 2.5YR 3/8) precipitates that collected from the study area consist mainly of schwertmannite and goethite, respectively. The percentage removal or adsorption capacity of metals depends on the initial concentration and characteristics of adsorbent. Removal efficiency of the adsorbents shows the order for metal ions of As > Cu > Cd. The adsorption efficiency by absorbent of precipitates in low concentration metal aqueous solution were observed 67.00-85.00% for As, 26.24-29.08% for Cd, and 7.67-12.82% for Cu. As the initial concentration of metal ions was increased from 1 to 10 mg/L, adsorption amount of adsorbent increased from 0.29 to 1.29 mg/g of Cu of schwertmannite, and from 0.24 to 1.97 mg/g of goethite.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.149-149
• /
• 2023

미세플라스틱은 입자크기가 5 mm 이하인 플라스틱으로 정의되며, 수계로 유입된 미세플라스틱은 내분비계 교란물질로 작용하여 생태계에 환경독성을 유발하고 오염물질을 흡착·운반할 수 있는 독성 물질의 매개체로서 미세플라스틱의 위해성에 대한 우려가 증가하고 있다. 본 연구는 수용액에서 다양한 미세플라스틱의 납(Pb) 흡착특성을 평가하고 미세플라스틱의 비표면적에 따른 흡착 효과를 비교하고자 하였다. 플라스틱 종류 중 HDPE (High-density Polyethylene)와 PVC (Polyvinyl Chloride)를 각각 세 가지 크기(Group 1: 2.5 mm - 1.0 mm, Group 2: 1.0 mm - 0.3 mm, Group 3: < 0.3 mm)로 제조하여 분류하였으며, 미세플라스틱 입자크기의 비표면적은 BET(Brunauer, Emmett, Teller)분석을 통하여 측정하였다. 담수환경 조성을 위해 pH 7로 조절한 Pb 용액의 농도(0, 0.5, 1, 5, 10, 30 mg/L)별 흡착실험을 수행하였으며 실험결과를 3가지 흡착등온식(Langmuir, Freundlich, Sips 모델)을 사용하여 미세플라스틱에서 Pb 흡착 거동을 나타내었다. BET 분석 측정결과, PVC의 경우 Group 3 > Group 2 > Group 1 순으로 PVC의 입자크기가 작을수록 비표면적이 크게 나타났으며, HDPE 비표면적 또한 비슷한 경향을 보였다. HDPE와 PVC에서 Pb의 흡착은 Langmuir 모델(R² > 0.97)과 Freundlich 모델(R² > 0.82)보다 Sips 모델(R² > 0.98)이 흡착 거동을 설명하기에 가장 적합하였다. 최대흡착능(Q_m) 상수는 입자크기가 작아질수록 흡착능이 높아지는 추세를 보였으며, 흡착세기(K_F)와 흡착강도(n^-1)는 각 플라스틱의 Group 3(HDPE K_F = 0.028, PVC K_F = 0.032; HDPE n^-1 = 0.225, PVC n^-1 = 0.547)에서 가장 높게 나타났다. 본 연구를 통해 HDPE와 PVC에서 Pb의 흡착특성은 Sips모델로 설명이 가능했으며, 이에 따라 Pb 흡착과정에 복수의 흡착메커니즘이 작용하고 있음을 유추해볼 수 있었다. 미세플라스틱의 입자크기와 비표면적이 Pb 흡착량에 영향을 미치는 것을 알 수 있었으며, 미세플라스틱이 중금속을 흡착하여 생물체 내로 전이시킬 수 있는 매개체 역할의 가능성을 확인하였다.