• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.411-414
• /
• 2008

본 논문에서는 $CO_2$ 분리용 활성탄의 표면분석 및 흡착속도를 비교하였다. TGA 방법에 의한 흡착속도 데이터를 획득함으로써 분리장치 설계를 위한 기초자료를 획득하였고, 흡착온도에 따른 결과는 흡착온도가 낮을수록, 흡착량이 증가하고 흡착속도 또한 더 빠름을 알 수 있었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.718-722
• /
• 1995

공기중에서 천이점 이후까지 산화된 지르칼로이 시편에 LiF, NaF, KF, NnCl, 그리고 LiOH 등을 흡착시켜 산화실험을 수행하였다. NaF, KF, NaCl을 흡착시킨 시편의 산화가 두드러지게 많이 됨을 확인할 수 있었다. LiF, LiOH를 흡착한 시편은 흡착하지 않은 시편과 큰 차이를 보이지 않고 산화가 진행되었다. 이는 Li의 전분이 초기에 산화막을 형성한 fresh 시편과는 달리 충분히 산화가 진행되어서 초기산화막의 존재가 없는 상태에서 흡착되었기 때문에 흡착의 효과가 거의 없는 것으로 나타났다고 사료된다. 이러한 결과를 이용하여 사용 후 핵연료의 보관시 안전성의 문제, 그리고 DUPIC 핵연료의 제작시에 이용될 수 있는 반복적 산화 환원의 방식에 적용될 수 있다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.231-239
• /
• 2005

This study was performed to investigate adsorption characteristics of MTBE and Cd depending upon types of clay minerals md their physicochemical properties. The adsorption characteristics were examined by batch adsorption test on various experimental parameters such as adsorption time, ratio of solution to soil, concentration of contaminants, content of organic matter, pH, and zeta potential. The adsorption efficiency of MTBE or Cd for three types of clays decreased in response to the increase of the ratio of solution to soil whereas their adsorbed amounts increased. MTBE was greatly adsorbed in the decreasing order of vermiculite, bentonite, and CTAB-bentonite while Cd was adsorbed in the decreasing order of bentonite, vermiculite, and CTA-bentonite. An equilibrium isotherm for MTBE was well fitted to Freundlich plotting whereas that for Cd was closely corresponded to Langmuir isotherm. The adsorbed amount of MTBE on bentonite and vermiculite showed the maximum at 1% and 5% of humic acid, thereafter diminished while the adsorbed amount of MTBE on CTAB-bentonite increased in proportion to humic acid. Conversely, the adsorbed amount of Cd on the addition of humic acid continued to increase regardless of types of adsorbents. For all types of adsorbents, adsorbed quantity and adsorption efficiency of Cd have been coincidently increased at pH 8 and they were further enhanced at pH 10 showing 90% adsorption efficiency. Upon pH rose, the zeta potential on each adsorbent began to decrease, while increasing Cd concentration led to decline of zeta potential, which in turn ascribed to lowering dispersion stability that could consequently enhance adsorption capability.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.458-465
• /
• 2020

Isotherms, kinetics and thermodynamic properties for adsorption of acid fuchsin (AF) dye by activated carbon were carried out using variables such as dose of adsorbent, pH, initial concentration and contact time and temperature. The effect of pH on adsorption of AF showed a bathtub with high adsorption percentage in acidic (pH 8). Isothermal adsorption data were fitted to the Freundlich, Langmuir, and Dubinin-Radushkevich isotherm models. Freundlich isothem model showed the highest agreement and confirmed that the adsorption mechanism was multilayer adsorption. It was found that adsorption capacity increased with increasing temperature. Freundlich's separation factor showed that this adsorption process was an favorable treatment process. Estimated adsorption energy by Dubinin-Radushkevich isotherm model indicated that the adsorption of AF by activated carbon is a physical adsorption. Adsorption kinetics was found to follow the pseudo-second-order kinetic model. Surface diffusion at adsorption site was evaluated as a rate controlling step by the intraparticle diffusion model. Thermodynamic parameters such as activation energy, Gibbs free energy, enthalpy entropy and isosteric heat of adsorption were investigated. The activation energy and enthalpy change of the adsorption process were 21.19 kJ / mol and 23.05 kJ / mol, respectively. Gibbs free energy was found that the adsorption reaction became more spontaneously with increasing temperature. Positive entropy was indicated that this process was irreversible. The isosteric heat of adsorption was indicated physical adsorption in nature.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.295-303
• /
• 2003

Sorption kinetics of hydrophobic organic compounds (chlorobenzene and phenanthrene) in natural wetland soils was investigated using laboratory batch adsorbers. One -site mass transfer model (OSMTM) and two compartment first-order kinetic model (TCFOKM) were used to analyze sorption kinetics. Analysis of OSMTM reveals that apparent sorption equilibria were obtained within 10 to 75 hours for chlorobenzene and 2 hours for phenanthrene, respectively. For chlorobenzene, the sorption equilibrium time for surface soil was longer than that of deeper soil presumably due to physico-chemical differences between the soils. For phenanthrene, however, no difference in sorption equilibrium time was observed between the soils. As expected from the number of model parameters involved, the three-parameter TCFOKM was better than the two-parameter OSMTM in describing sorption kinetics, The fraction of fast sorption ($f_1$) and the first-order sorption rate constants for fast ($k_1$)and slow ($k_2$) compartments were determined by fitting experimental data to the TCFOKM. The results of TCFOKM analysis indicate that the sorption rate constant in the fast compartment($k_1$) was much greater than that of slow fraction($k_2$) . The fraction of the fast sorption ($f_1$) and the sorption rate constant in the fast compartment($k_1$) were increasing in the order of increasing $k_{ow}$, phenanthrene > chlorobenzene. The first-order sorption rate constants in the fast ($k_1$) and slow ($k_2$) compartments were found to vary from $10^{-0.1}\;to\;-10^{1.0}$ and from $10^{-4}\;to-10^{-2}$, respectively.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.107-115
• /
• 2023

Cobalt can be released into the natural environment as industrial waste from the alloying industry and as acid mine drainage, and it is also a radionuclide (⁶⁰Co) that constitutes high-level radioactive waste. Smectite is a mineral that can be useful for adsorption and isolation of this element. In this study, Cheto-type montmorillonite (Cheto-MM), which is the source clays of The Clay Mineral Society (CMS) and already well-characterized, was used. The effect of the adsorption site affected by the presence of interlayer water on the adsorption of cobalt before and after dehydration by heating was evaluated and the adsorption mechanism of cobalt on Cheto-MM was studied by applying adsorption kinetics and adsorption isotherm models. The results showed that the adsorption characteristics changed with dehydration and subsequent shrinkage, and cobalt was found to be adsorbed at the edge of Cheto-MM for about 38% and adsorbed at the interlayer site for about 62%, suggesting that the cobalt adsorption of Cheto-MM is significantly influenced by the interlayer. By applying the adsorption kinetic models, the cobalt adsorption kinetics of Cheto-MM is explained by a pseudo-second-order model, and the concentration-dependent adsorption was best described by the Langmuir isotherm adsorption model. This study provides basic knowledge on the adsorption characteristic of cobalt on montmorillonite with different adsorption sites and is expected to be useful in predicting the adsorption behavior of smectite in high-level radioactive waste disposal sites in the future.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.338-341
• /
• 2003

유기염소계 농약 중 대표적인 살충제 $\delta$-BHC(hexachlorocyclohexane)와 1, 2-DCB (1, 2-dichlorobenzene)에 대한 논, 밭 토양 및 풍화 토에 흡착 배치실험을 통하여 토양 특성과 유기오염물간의 흡착 관계를 규명하였다. 13개의 토양시료에 대하여 pH, CEC, 유기물 함량, 비표면적, 입도분석, 원소조성분석을 통하여 토양의 물리ㆍ화학적 특징이 토양 흡착에 미치는 영향을 규명하고자 하였다. 유기염소계 농약의 흡착량을 Freundlich isotherm으로 나타내어 흡착분배계수(K$_{d}$)를 산출하였다. $\delta$-BHC는 유기물 함량이 높은 soil-4$_{d}$에서 가장 높은 $K_{d}$ 값을 보였으며, 1,2-DCB의 경우 CEC, 비표면적이 가장 낮은 soil-5에서 낮은 $K_{d}$ 값을 보여 토양 내 유기물 함량과 비표면적이 유기오염물 흡착량에 중요한 요소로 작용함을 알 수 있었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.162-167
• /
• 2003

최근 수년간 유선 시뮬레이션은 연산 속도의 효율성과 수치 분산으로 인한 오차를 감소시킬 수 있는 장점으로 인해 많은 연구가 이루어졌으며 오염물의 거동을 모사 하는데 많이 사용되고 있다. 이 연구에서는 유선 시뮬레이션의 기법을 이용하여 1차의 비평형 흡착을 고려한 오염물 거동 수치 모사를 수행하였다. 1차의 비평형 흡착의 경우 흡착 계수에 따라 오염물의 이동 속도가 민감하게 반응하는 것을 확인할 수 있었고 흡착 계수의 값이 커질수록 오염의 전파 지연 효과가 크게 나타남을 알 수 있었다. 1차의 비평형 흡착의 경우에 평형 흡착과는 달리 오염이 진행되면서 오염물의 농도를 감소시키는 영향을 나타내었으며 이로 인하여 오염물이 더 이상 진행하지 못하는 제로라인을 형성하게 하였다. 이 제로라인은 흡착 계수의 값이 클수록 탈착 계수의 값이 작을수록 오염원에 가깝게 형성되었다.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.80-84
• /
• 1973

In treating solid-liquid interfaces, it is assumed that the adsorbed layer consists of monolayer and the molecules of the adsorbed layer behave as two dimensional liquid and oscillate harmonically in the vertical direction to the adsorbent. Applying the transition state theory of significant liquid structure to the adsorbed molecules, the adsorption isotherm, entropy and heat of adsorption for cyclohexane-benzene solutions adsorbed on silica-gel G are calculated. The calculated values are in good agreements with those of the observed ones.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.91-96
• /
• 1994

중.저준위 방사성 폐기물의 대표적인 핵종인 137Cs, 90Sr에 대한 캐올리나이트의 흡착특성을 수용액의 이온강도와 pH의 영양하에서 알아보았다. 흡착실험은 회분식으로 하였고, 사용한 수용액은 NaCl, CaCl2, MgSO4, KCL 각각을 10-1, 10-2, 10-3, 10-4 mole/$\ell$로 하였다. 수용액광물 평형상태의 pH를 4.5, 7.0, 10.5로 조절하였다. 실험결과 캐올리나이트의 Cs, Sr 흡착은 이온강도와 pH에 상당한 영향을 받으며, Sr 흡차에 양이온들의 경쟁은 Ca2+ Mg2+>K+>Na+ 순을 보이고, Cs의 경우에는 K+>Ca2+ Mg2+>Na+의 순을 보인다. 이는 수용액상에서 이온들의 수호에너지와 관련되며, 광물입자와 이온들의 물구조변환특성에 의해 설명된다. Cs과 Sr 사이에 흡착우선성은 산성 내지 약알카리에서는 Cs이 Sr보다 흡착이 잘 되나, 강알칼리성 환경에서는 Sr이 Cs보다 흡착이 잘 되는 pH 의존성을 보였다. 수용액의 pH가 증가함에 따라 핵종의 흡착량이 증가하는데, 이는 캐올리나이트의 흡착자리인 실라놀과 알루미놀에 의한 제타전위가 pH에 의존함과 잘 일치한다.