• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.129-138
• /
• 1999

Chlorinated aromatic compounds are one of the largest groups of environmental pollutants as a result of world-wide distribution by using them as herbicides, insecticides, fungicides, solvents, hydraulic and heat transfer fluids, plasticizers, and intermediates for chemical synthesis. Because of their toxicity, persistence, and bioaccumulation, the compounds contaminated ubiquitously in the biosphere has attracted public concerns in terms of serious influences to wild lives and a human being, such as carcinogenicity, mutagenicity, and disturbance in endocrine systems. The biological recalcitrance of the compounds is caused by the number, type, and position of the chlorine substituents as well as by their aromatic structures. In general, the carbon-halogen bonds increase the recalcitrance by increasing electronegativity of the substituent, so that the dechlorination of the compounds is focused as an important mechanism for biodegradation of chlorinated aromatics, along with the cleavage of aromatic rings. The removal of the chlorine substituents has been known as a key step for degradation of chlorinated aromatic compounds under aerobic condition. This can occur as an initial step via oxygenolytic, reductive, and hydrolytic mechanisms. The studies on the biochemistry and genetics about microbial dechlorination give us the potential informations for microbial degradation of xenobiotics contaminated in natural microcosms. Such investigations might provide biotechnological approaches to solve the environmental contamination, such as designing effective bioremediation systems using genetically engineered microorganisms.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.249-258
• /
• 2007

In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.

• Clean Technology
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2020

Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.

• Food Science of Animal Resources
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2005

Purge & Trap method was applied to perform more simple and rapid detection for analysis of volatile flavor compounds in milk. Maximal sampling of 30 mL milk for glass flask sparger was treated by He gas purging for 2 hours. Reported major volatile compounds were detected by GC-MS after 2 hours absorption and desorbed from Purge & Trap equipped with Tenax trap. Volatile flavor compounds were analyzed by Purge & Trap and GC-MS to investigate the changes of flavor components in milk between raw and deodorized milk. Fourteen volatile compounds including acetaldehyde, ethanol, 2-propanone, dimethyl sulfide, isobutanal, 3-methyl 2-butanone, 2-butanone, 3-methyl butanal, pentanal, 3-hydroxy-2-butanone, methyl disulfide, hexanal, and 2 others were detected. Six compounds such as ethanol, dimethyl sulfide, pentanal, 3-hydroxy-2-butanone, and methyl disulfide were completely eliminated after deodorization treatment. Four compounds such as 3-methyl 2-butanone, 2-butanone, 3-methyl butanal, and an unknown compound 81 (M/sup +/) were also decreased after raw milk was deodorized. The other four compounds such as acetaldehyde, 2-propanone, hexanal, and an unknown compound (M/sup +/) were not decreased.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.389-400
• /
• 2011

A high-performance liquid chromatographic (HPLC) method was developed to determine residues of phenothrin and silafluofen, known as synthetic pyrethroids, in agricultural commodities. Insecticide residues were extracted with acetone from representative samples of four crops which comprised rice, apple, pepper and cabbage. The extract was purified serially by liquid-liquid partition and Florisil column chromatography. For rice and pepper samples, acetonitrile/n-hexane partition was additionally adopted to remove nonpolar interferences. Reversed phase HPLC using an octadecylsilyl column was successfully applied to separate two phenothrin isomers and silafluofen from sample co-extractives. Intact parent compounds were sensitively detected by ultraviolet absorption at 226 nm. Recovery experiment at the quantitation limit validated that the proposed method could apparently determine phenothrin and silafluofen residues at 0.02 and 0.01 mg/kg, respectively. Mean recoveries of phenothrin and silafluofen from four crop samples fortified at three levels in triplicate were in the range of 82.4~109.8% and 83.7~109.8%, respectively. Relative standard deviations of the analytical method were all less than 10%, irrespective of crop types and spiking levels. A selected-ion monitoring (SIM) LC/mass spectrometry (MS) with electrospray ionization was provided to confirm the suspected residue of phenothrin, even though no sufficient ionization of silafluofen was obtained. Both phenothrin and silafluofen could be successfully confirmed by gas chromatography/MS SIM with electron impact at 70 eV. The proposed method is sensitive, repeatable and rapid enough to apply to officially routine inspection of agricultural products.

• Clean Technology
• /
• v.22 no.2
• /
• pp.114-121
• /
• 2016

In this studies, SCR reaction activity and SO₂ durability enhancement study on manufacturing conditions of the V/TiO₂ catalyst was carried out for the removal of nitrogen oxides generated in the combustion furnace. The catalysts are characterized by XPS, Raman, H₂-TPR and SO₂-TPD. When the vanadium was contained of 2 wt%, it showed excellent SO₂ durability and catalytic activity. and When the tungsten is added as a promotor, the enhancement of reducing ability at a low temperature and reduction of SO₂ adsorption capacity improved the reaction activity and SO₂ durability. V/W/TiO₂ are prepared by the lower pH of vanadium solution, vanadium was highly dispersed on the surface and inhibited the formation of crystalline V₂O₅. in addition, it was confirmed that this catalyst can be used as excellent resistance to high concentration of CO in the combustion furnace.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2006

Porous chitosan and chitin membranes were prepared by using silica particles as porogen. Membrane preparation was achieved via the following three steps: (1) chitosan film formation by casting an chitosan solution containing silica particles, (2) preparation of porous chitosan membrane by dissolving the silica particles by immersing the film into an alkaline solution and (3) preparation of porous chitin membrane by acetylation of chitosan membrane with acetic anhydride. The optimum preparation conditions which could provide a chitosan and chitin membranes with good mechanical strength and adequate pure water flux were determined. To allow protein affinity, a reactive dye (Cibacron Blue 3GA) was immobilized on porous chitosan membrane. Binding capacities of affinity chitosan and chitin membranes for protein and enzyme were determined by the batch adsorption experiments of BSA protein and lysozyme enzyme. The maximum binding capacity of affinity chitosan membrane for BSA protein is about 22 mg/mL, and that of affinity chitin membrane for lysozyme enzyme is about 26 mg/mL. Those binding capacities are about $several{\sim}several$ tens times larger than those of chitosan and chitin-based hydrogel beads. Those results suggest that the porous chitosan and chitin membranes are suitable in affinity filtration chromatography for large scale separation of proteins.

• Korean Journal of Microbiology
• /
• v.21 no.4
• /
• pp.221-228
• /
• 1983

An improved procedure for the rapid purification of glucose-6-phosphate dehydrogenase from extracts of Saccharomyces cerevisiae was developed by using affinity chromatography. Among six affinty media tested, $NADP^+ -agarose$ and Affi-gel Blue were more effective than others (i.e., Affi-gel Red, AMP-agarose, ATP-agarose, and $NAD^+ -agarose$). Conditions to desorb the enzyme bound to the affinity media were examined to increase the purity as well as yield. The best result was obtained when the column was developed with a linear gradient of KCl (0-1.0M). In case of Affi-gel Blue, introduction of $NAD^+$ (15mM) washing step prior to the salt gradient was most effective to remove $NAD^+ -binding$ proteins. For a large scale preparation of G-6-P dehydrogenase higher recovery was obtained by Affi-gel Blue than $NADP^+ -agarose$, however, the purity of the enzyme was decreased by 10 times if the former was used as the affinity medium. The capacity of Affi-gel Blue for G-6-P dehydrogenase was found to be 5 times higher than that of $NADP^+ -agarose$. Furthermore Affi-gel Blue could be reused repeatedly and its preparation is relatively easier and less expensive than $NADP^+ -agarose$.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.38-43
• /
• 2004

Porous carbon aerogel-silica gel composite materials were used as the electrodes of capacitive deionization(CDI) process, which were prepared by a paste rolling method. The electrochemical parameters such at current values, coulombs af a function of cycle, and CDI efficiencies were investigated for 10th and 100th cycles in 1,000ppm NaCl solution. Carbon aerogel-silica gel composite electrodes showed good wet-ability and higher mechanical strengths even under the NaCl solutions as well. In our experimented runs, all of the composite electrodes also are showed good cycle-ability without destroy of active material during cycles and decreased manufacturing times by $50\%$. Conclusively, the adding of silica gel powder to carbon aerogel leads to the effective performance of CDI process due to effective utilization of active materials by increasing the wet-ability and mechanical hardness.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.3-15
• /
• 2003

Recently more than 450 incidents of oil spill a year have occurred in nearshore of Korea, which caused unmeasurelable losses in fisheries and severe damage in marine ecosystem. Two approaches remain paramount in any response to marine oil spill : the enhancement of natural dispersion of the oil by using dispersants, and mechanical recovery using booms and skimmers. A technique currently receiving fresh attention is the enhancement of the natural bioremediation of oil through the application of micro-organisms and/or nutrient. Oil, like many natural substances, will biodegrade over a period of time into simple compounds such as carbon dioxide, water and biomass. Bioremediation is the term used to describe a range of processes which can be used to accelerate natural biodegradation. More specifically biostimulation is the application of nutrients, and bioaugremetation or seeding is the addition of microbes specially selected to degrade oil. Bioremediation is an economically attractive method for the clean-up of oil-contaminated area. Bioremediation has been demonstrated to be an effective oil spill countermeasure for use in cobble, sand beach, salt marsh, and mud flat environment.