• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.1-35
• /
• 2007

In the last decades, the decrease in biological or chemical availability of sorbed contaminants as contact time passed, is generally accepted. This phenomenon so called as "aging" or "sequestration" is known to directly affect risk of the contaminats. This was observed for mainly for hydrophobic organic contaminants (HOCs), but also reported for heavy metals. Aging is known to be directly related to sorption-desorption hysteresis, irreversible sorption, desorption-resistance, nonequilibrium sorption, etc. The decrease in bioavailability due to aging or sequestration indicates realistic decrease in risk potential. Recently a risk-based management concept by scientific evidences but not the simple measurement of contaminant concentration has been attempted to determine environmentally acceptable remedial endpoint. This is because selection of remedial endpoint based on not total concentration but the bioavailability and toxicity of contaminants can reduce both the treatment cost and remedial activities of the contaminated sites. The bioavailability and toxicity of the residual contaminants are highly affected by the fate and transport and also directly affect the exposure pathways and bioaccumulation of contaminants in the living biota. In this paper, scientific feasibility on the risk-based clean-up and management of contaminated sites is reviewed.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.31-38
• /
• 1987

The present study was carried out to determine the effect of the physical, chemical and mineralogical properties of paddy soil on the adsorption and desorption of $Sr^{90}$ from absorbed soils. The results obtained were as follows: 1. Most of the adsorbed $Sr^{90}$ was exchangeable and water soluble. $Sr^{90}$ extracted by ammonium acetate was very high compared to the water soluble fractions, and the ammount decreased with the increase of calcium application, but increased proportionally with the increase of $Sr^{90}$ treatment. 2. The distribution of $Sr^{90}$ in paddy soil depend on the soil type. Average-distribution rates of water soluble, exchangeable and non-exchangeable fractions of $Sr^{90}$ in the soils were 28.6%, 59.3% and 12.1% respectively. 3. The non-exchangeable from of $Sr^{90}$ was high in the soils of high illite and low vermiculite content. 4. The desorption of $Sr^{90}$ from adsorbed soils decreased with the increase of pH and ex-cations of the soils, but increased with the amount of organic matter and clay content in the soil.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.790-796
• /
• 2011

In this study, we measured the concentrations of volatile organic compounds (VOCs) in Shiwha area by using active and passive sampler. We did a comparative analysis of the characteristics of the active sampler and passive sampler. In the case of the passive sampler, the average TVOC concentration of the industrial area was 1.86 times higher than that of the residential area. In the case of the active sampler, the average TVOC concentration of the industrial area was 1.07 times higher than that of the residential area. When using the passive sampler, the concentration of VOCs in the industrial area was noted to be higher than the concentration found in the residential area. However, when we used the thermal desorption tube, the concentration of residential area was higher rather than that of industrial area in some substances such as trichloroethylene, toluene, ethylbenzene, and xylene. Toluene was a larger percentage of the overall BTEX ratio. In case of the passive sampler, the relative ratio of toluene, ethylbenzene, and xylene was higher in the industrial area than in the residential area. In contrast in case of the thermal desorption tube, the ratio of these substances was higher in the residential area rather than in the industrial area. The passive sampling in this study showed an appropriate method to analyze the temporal and spatial concentrations of air contaminants. This assessment would prove to be useful for its observance of standards or epidemical study.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.208-213
• /
• 2013

Zirconium hydroxide was synthesized by varying the aging time of the zirconyl chloride octahydrate at $100^{\circ}C$ in aqueous solution and the resulting hydroxides were calcined at $700^{\circ}C$ for 6 h to obtain the crystalline $ZrO_2$. The materials used in this study were characterized by differential thermal analysis (DTA), X-ray diffraction (XRD), $N_2$-sorption, transmission electron microscopy (TEM), $NH_3$ temperature-programmed desorption ($NH_3$-TPD), $CO_2$-TPD and iso-propanol TPD analyses to correlate with catalytic activity for the dehydration of iso-propanol. The pure tetragonal $ZrO_2$ phase was obtained after 24 h aging of zirconium hydroxide and successive calcination at $700^{\circ}C$. The increase of aging time showed the production of smaller particle size $ZrO_2$ resulting that the higher specific surface area and total pore volume. $NH_3$-TPD results revealed that the relative acidity of the catalysts increased along with the increase of aging time. On the other hand, the results of $CO_2$-TPD showed the reverse trend of $NH_3$-TPD results. The best catalytic activity for the dehydration of iso-propanol to propylene was shown over $ZrO_2$ catalyst aged for 168 h which had the highest $S_{BET}$ ($178\;m^2\;g^{-1}$). The catalytic activity could be correlated with high surface area, relative acidity and easy desorption of iso-propanol.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.208-216
• /
• 2022

Surface morphology and adsorption characteristics of black and white charcoals prepared from Korean traditional kiln were quantitatively analyzed. TGA and elemental analysis of charcoals were different from produced kiln, and thermal degradation temperature and carbon content of white charcoals were apparently higher than those of black charcoals. Surface morphology shows the activation progressed through the longitudinal direction of woods and new micropores were developed to radial direction on the surface of macropores as the furthermore activation resulting in the pore connection. BET adsorption isotherms show that there are low-pressure hysteresis due to the no desorption of adsorbates, which resulted in unique Type of charcoals overlapping Type I and Type IV. Such a low-pressure hysteresis is occurred from expansion of adsorbates, which were embedded in the micropore entrances and did not get out during the desorption run. The characteristics of charcoals such as specific surface area and pore size distribution did not show correct values depending on not only produced company but also sampling sites of one piece of charcoal. Therefore, it is not easy to suggest the quantitative characteristics of charcoals prepared from Korean traditional kiln. On the other hand, preparation the quality standard of charcoal is necessary for their special uses such as adsorbent.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Clean Technology
• /
• v.22 no.1
• /
• pp.9-15
• /
• 2016

xAl-yZr mixed oxide catalysts with different molar ratios of Al/(Al+Zr) were prepared by a co-precipitation method and its catalytic performance was compared in the iso-propanol dehydration as a model reaction. The catalysts were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), N₂ adsorprion-desorption, NH₃ temperature programmed desorption (NH₃-TPD), and iso-propanol TPD analyses. The addition of Al into ZrO₂ promoted the formation of relatively small particles with large surface areas and retarded the transformation of teragonal phase to monoclnic phase. NH₃-TPD results revealed that the relative acidity of the catalysts increased along with the increase of Al molar ratio. The catalytic activity for the dehydration of iso-propanol to propylene was also increased with the same tendency. The catalytic activity could be correlated with high surface area, acidity and easy desorption of iso-propanol.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.505-508
• /
• 2010

The characteristics of desorption reaction for spent activated carbon produced from the manufacture of other chemical products in Shiwha/Banwal industrial complex were investigated. TGA (Thermogravimetric Analyzer) was used to study for characteristics of desorption and kinetics. Then Friedman method and Freeman-carroll method were used to find the activation energy and the order of reaction. Activation energy by Friedman method was 24.82~46.49 kJ/moL. And then activation energy and order of reaction by Freeman-carroll method were 8.77~32.26 kJ/moL and 0.11~1.69.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.105-113
• /
• 1995

Adsorption experiments of heavy metal cations by Fe- and Al-hydroxides was conducted to obtain clear information on their adsorption mechanisms. The adsorption isothermal curves of heavy metal cations by Fe- and Al-hydroxides conformed to Langmuir's equation. Increasing the crystallinity degree of Fe- and Al-hydroxides tended to decrease the adsorption capacity and binding energy of heavy metal cations. At the same crystallinity degree, Al-hydroxide showed higher adsorption capacity and energy for the heavy metal cations than Fe-hydroxide. The adsorption capacity and energy of heavy metal cations were directly related to CEC, specific surface area and charge density of hydroxides, and the sequence was in the order of $Cu^{+{+}}$ > $Zn^{+{+}}$ > $Cd^{+{+}}$. The adsorption mechanism of $M^{+{+}}$ form of heavy metal could be presumed as the specific adsorption of $M^{+{+}}$ and the desorption of two $H^+$ from the surface aquo($OH_2$) and/or hydroxo(-OH) group for each mole of $M^{+{+}}$ adsorbed. A ring structure between $M^{+{+}}$ and two surface aquo and/or hydroxo groups was postulated. Nonspecific adsorption involved the adsorption of $MCl^+$ and the desorption of one H+ from the surface aquo and/or hydroxo groups for each mole of $M^{+{+}}$ adsorbed. A single bond structure in which $MCl^+$ replaced one $H^+$ from the surface aquo and/or hydroxo groups was postulated. The ratio of specific to nonspecific adsorption increased with increasing pH.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.155-160
• /
• 2002

최근 들어서 오존층을 파괴하는 것으로 알려진 CFC와 같은 냉매를 사용하지 않고 허니컴식 제습rotor와 rotor식 현열교환기로 구성된 '흡착식제습냉난방시스템'이 개발되어 실용화 단계에 있다. 제습제를 이용한 냉방시스템은 에너지측면에서 효율적이고, 비용 면에서 경제적이며, 환경친화적이다.(중략)