• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2945-2950
• /
• 2011

As the step to improve fuel efficiency, there is the system to build up the eddy of combustion chamber at the suction line in order to increase the combustion efficiency. The models installed with no vortex generation system or with various shapes of the system are examined by fluid analysis. Vortex generation system is installed prior to the suction of combustion chamber. The wing of this system winds itself around the suction air and generates the vortex. This study investigates the flow of suction air and the pressure distribution of suction stroke by using the eddy generation system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1472-1479
• /
• 2002

Environmental protection on the ocean has been interested and nowadays the International Maritime Organization(IMO) has advanced on the prevention of air pollution from ships. This study presents the emission characteristics of 4 stroke marine diesel engines in E3 cycle (propulsion application) and D2 cycle (generation application). Also the effects of important operating parameters in terms of intake air pressure and temperature, and maximum combustion pressure on the specific emissions are described. Emissions measurement and calculation are processed according to IMO Technical Code. The results show that NOx emission level in E3 cycle is higher than that in D2 cycle due to lower engine speed at low load and the maximum combustion pressure by fuel injection timing control and intake air temperature has strong influence on NOx emission production. And CO, HC emissions are not affected by maximum combustion pressure and intake air pressure and temperature.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.23-27
• /
• 2002

천음속으로 비행하는 공기흡입유도탄의 경우, 비행거리 및 요구기동을 충족시키기 위해서는 추진제트에 의해 변화하는 기체 기미부의 압력항력을 정확히 예측하고 이 항력을 감소시키기 위한 기미부 형상설계는 매우 중요하며 필수적이다. 제트 Plume에 의한 기체 기미부 및 base의 압력분포에 따른 항력해석을 난류모델링을 고려한 수치해석 결과를 제시한다. Jet plume의 크기 및 배기가스 조건에 따른 항력변화, 및 기미부 형상에 따른 항력변화 그리고 천음속 마하수에 따른 결과 등을 제시한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.57-58
• /
• 2002

램제트는 다른 여러 추진시스템에 비하여 획기적으로 증가된 사거리를 가지므로 가용범위의 확대는 물론, 목표물 타격 시 높은 명중률과 낮은 격추율을 가지는 효과적인 추진 시스템이다. 램제트 엔진을 장착한 미사일로는 프랑스의 Griffon, ASMP, 미국의 Bomarc, Talos, 영국의 Bloodhound, Sea dart, 소련의 SA4, SA6 등을 비롯하여 많은 종류가 개발되어 실전 배치되었다. 근래 들어 램제트는 군사전략과 전술적인 목적 이외에도 민간용으로도 그 실용성이 강조되고 있어 그 중요성은 날로 더할 것으로 예측된다. 램제트는 일반적인 공기흡입식 엔진과는 달리 엔진 내부에 기계적으로 구동되는 부분이 없이 충격파를 통과하면서 공기의 압력이 높아지는 현상인 램압축 현상을 이용하여 공기를 압축하게 되므로 엔진의 구조가 간단하고, 상대적으로 높은 비추력과 추력/중량비를 가진다. 램제트는 정지 상태에서는 작동되지 않으며 사용 가능한 최소의 압력비를 줄 수 있는 비행 마하수에 도달해야 램제트가 작동하게 된다. 따라서 이러한 비행속도를 줄 수 있는 별도의 추진장치가 필요하게 되는데 이와 같은 보조 추진장치로 부스터를 사용한다. 부스터가 엔진의 내부에 장착된 램제트를 일제형 램제트 (IRR: integral Rocket Ramjet)라 부르며, 현대의 전략미사일과 민간용 초음속 항공기의 엔진에 도입되어 활발한 연구가 진행 중이다. 램압력을 이용하여 압축하므로 램제트의 설계시 설계점 비행 속도에서 전압력 손실이 최소가 되도록 설계되어야 하며, 이를 실험이나 수치해석을 통해 확인하여야 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.87-90
• /
• 2003

It has been well known that the major feature of compressible flow fields might be different depending on their formation processes. The objectives of the present study is to investigates the effect of jet development on the time history of supersonic jet flow field, accompanying nonequilibrium condensation. Especially, the behaviors of Mach disk diameter and location in a supersonic moist air jet are presented in terms of nozzle pressure ratio and initial relative humidity. The relative humidity of moist air is controlled at the nozzle supply, and the nozzle pressure ratio is varied to obtain the moderately underexpanded flows at the exit of the nozzle, installed in an indraft wind tunnel. It is found that at the same pressure ratio the Mach disk diameter increases with the initial relative humidity, while moves further upstream. Furthermore, the values of Mach disk diameter and location for increasing pressure ratio show larger than those for increasing.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.343-350
• /
• 2021

In this study the suction pressure was measured with respect to operational time by submersing the multi-bore capillary membrane module in membrane bioreactor(MBR). The hexagonal shape capillary module which has the nominal pore size of 0.2 ㎛, outer diameter of 6.4 or 4.2 mm was immersed in MLSS 8,000 mg/L active sludge aqueous solution, and confirmed changes with respect to permeation flux and air flow rate. It was operated by the filtration/relaxation(FR), FR with backwashing(FR/BW), and sinusoidal flux continuous operation(SFCO) modes. The suction pressure for the SFCO and FR modes was lower at 30 and 50 L/m²·hr, respectively. In addition, the suction pressure of the module with a small outer diameter was relatively low. The suction pressure of a large outer diameter was greatly increased, but it could be reduced by more than 40% by backwashing.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.81-85
• /
• 2022

In this study, we conducted a structural design and analysis of air intake of aircraft engine using composite materials. First, an investigation on structural design requirement of target structure was carried out. The distributed pressure load and acceleration condition was applied to structural design. To evaluate the structural design result, finite element analysis was carried out. The stress, deflection and buckling analysis for structural safety evaluation was performed. Finally, it was confirmed that the air intake through structural analysis is safety.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.845-852
• /
• 2007

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the impulse turbine with staggered blade to improved performance by numerical analysis using commercial CFD code, FLUENT Maximum value of axial airflow velocity during exhalation is higher than that during inhalation This paper deal with special-type of Impulse Turbine so-called "Staggered Blade" for more efficiency to making air flow direct to on pressure side. Also, this paper has proposed special-type turbine with self-pitched blade more efficient.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.235-240
• /
• 2010

Transpiration cooling is the most effective cooling technique for liquid rocket and air-breathing engines operating in aggressive environments with higher pressures and temperatures. Combustor liners and turbine vanes are cooled by the coolant(air or fuel) passing through their porous walls and also the exit coolant acting as an insulating film. However, its practical implementation has been hampered by the limitations of available porous materials. The search for more practical methods of increasing the internal heat transfer within the walls has led to the development of multi-laminate porous structures, such as Lamilloy$^{(R)}$ and Transply$^{(R)}$. This paper reviews recent research activities of transpiration cooling for the propulsions of liquid rocket, gas turbine, and scramjet.