• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.165-171
• /
• 1998

An axial electromagnetic levitation system using attractive force is a highly nonlinear system due to the nonlinearity of materials, variable air gap and flux density. To control the levitating system with large air gap, a conventional PID control based on the linear model is not satisfactory to obtain the desired performance and the position tracking control of the sinusoidal motion by simulation results. Thus, sliding mode control(SMC) based on the input-output linearization is suggested and evaluated by simulation and experimental approaches. Usefulness of the SMC to this system is conformed experimentally. If the expected variation of added mass can be included in the gain conditions and the model, the position control performance of the electromagnetic levitation system with large air gap will be improved with robustness.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2018

FCV is installed with a automatic valve attached in an high pressure cylinder to control the hydrogen flow. The supply of hydrogen from the cylinder into the fuel cell stack is controlled via the on/off operation of a solenoid attached to the automatic valve. The solenoid needs to provide the necessary attraction force even at any saturation temperature caused by drive of the vehicle. In this study, the simplified prediction equations for the saturation temperature are suggested. The finite element analysis was performed by steady state technique, according to the boundary condition in order to predict the saturation temperature and attraction force. Finally, the saturation temperature was validated through comparison between the analysis results and measurement results. From the results, the measured saturation temperature $5.9^{\circ}C$ lower with respect to the analysis results. And the error of attraction force ranged from 1.0 to 2.1 N at testing conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.192-192
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.201-201
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.304-307
• /
• 1995

In this paper, an optical sensing system has been developed to detect the dust in vacuum cleaner. The system works well through self-tuning mechanism, even though there are systemic variance and characteristic change which is caused by the pollution on the surface of the optical elements. Using the developed sensing system, a novel suction power control system has been proposed, which is able to be used for a long time.

• Journal of the KSME
• /
• v.35 no.10
• /
• pp.917-923
• /
• 1995

회전체 진동은 주로 밸런싱에 의해 줄일수 있지만 위험속도에서 나타나는 회전체 진동은 종종 피할 수 없다. 전자기 베어링은 이러한 회전체 진동을 능동적으로 제어하는 방법으로써 사용된다. 비접촉으로 회전체에 힘을 작용하는 동흡진기(dynamic vibration absorber)는 기존의 것에 비해 새로운 것을 필요로 하지 않는 아주 간단한 방법이다. 영구자석으로 구성된 자석 댐퍼는 비접 촉동흡진기의 일종이지만 영구자석만으로는 적절한 감쇠 성능을 만족시킬 수 없다. 따라서 영 구자석과 전자석을 동시에 사용하는 하이브리드 자석이 넓은 운전영역에서 좋은 진동제어 성능을 자지기 때문에 유용하다. 전력공급의 편리성을 위해서 하이브리드 자석을 합진기쪽에 설치하고 여러 개의 편으로 된 영구자석은 회전체의 주위에 부착하였다. 본 연구의 목적은 수직 회전 체(vertical rotor)의 진동을 제어하기 위해서 전자기력을 이용하는 하이브리드 관성 댐퍼를 개 발하는 것이다. 지금까지 전자석을 이용한 진동제어는 여러 저자에 의해 연구되어 왔으며 자기 베어링은 회전체의 진동을 제어하기 위한 전형적인 예이다. 그러나 회전체에 능동관성 댐퍼를 직접 적용한 예는 없었다. 이동흡진기는 전자석의 반발력(repulsive force)을 이용하고 흡진기의 운동에 의해 에너지가 감쇠된다. 반면에 자기 베어링에서는 전자석의 흡인력(attractive force)을 이용한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1055-1056
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.745-746
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.183-183
• /
• 2004

기능적/공간적 통합 원리를 이용하여 기존 Multi-coordinate 드라이브 모듈들을 통합 구현하려는 시도들이 보고되고 있다. 본 논문에서는 선형 유도 구동기에서 에지 효과를 줄이기 위해 개발된, 이동 자장의 방향과 폐자로의 방향이 수직인 횡자속 선형 유도 구동기(TFLIM)를 대상으로 이러한 통합 원리를 이용하여 구동기에 인가되는 3상 입력을 조절하여 공극의 자기 상호 작용에 기인하여 부수적으로 발생되는 흡인력/부상력을 능동적으로 이용할 수 있는 방법을 제안한다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1202-1208
• /
• 2006

This paper presents an experimental characteristics of electro-hydraulic proportional pressure control valve. In this study, poppet and valve body which are assembled into the proportional solenoid were designed and manufactured. The constant force characteristics of proportional solenoid actuator in the control region should be independent of the plunger position in order to be used to control the valve position in the fluid flow control system. The stroke-force characteristics of the proportional solenoid actuator is determined by the shape (or parameters) of the control cone. In this paper, steady state and transient characteristics of the solenoid actuator for electro-hydraulic proportional valve are analyzed using finite element method and it is confirmed that the proportional solenoid actuator has a constant attraction force in the control region independently on the stroke position. The effects of the parameters such as control cone length, thickness and taper length are also discussed.