• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2010

This experiment was conducted to examine the treatment conditions for single-color dyeing using the variety 'Akito' which was selected based on the flower size, density, blooming shape, elegance, expression of the dying color. The optimal conditions of dyeing rose flower were pH 3.5 under the $20-25^{\circ}C$, in which the vase life showed 15 days as longest after dyeing. The most suitable flower stage for dyeing was identified as second or third stage at which three petals of flower are opened. $10g{\cdot}L^{-1}$ concentration of dyeing solution with $2mL{\cdot}L^{-1}$ treatment of spreader for rose dyeing gave the best color performance.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2034-2035
• /
• 2008

본 논문은 RVM(Return Voltage measurement)을 이용하여 식물유와 광유에 따른 절연지의 수분 흡습성에 관한 특성을 비교하였다. 시험 절연재료로써 절연유는 각각 식물유(Bio Trans 1000,Cargill사)와 광유(제1종 2호, 동남석유(주))를 사용하였고, 절연지는 셀룰로오스계 크래프트 절연지를 사용하였다. 각 조건에서 IEEE/ANSI Standard C59.91-1981의 기대수명 곡선에서 $55^{\circ}C$ 절연을 기준으로하여 가속 열열화 시험을 수행한 후, $15^{\circ}C$씩 온도를 변화시켜 RVM 측정을 하였다.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.5
• /
• pp.457-462
• /
• 2004

Physical properties of soybean curd powder prepared with hot air, vacuum and freeze drying methods were investigated. Adsorption characteristics were studied under various water activities (such as 0.11, 0.33, 0.44, 0.55, 0.66, 0.75, 0.85, and 0.93) at 5℃, and prediction models were developed. Equilibrium moisture and monolayer moisture contents were the highest when freeze dried. due to the porous structure. In this result, Oswin model was the best fit for the isotherm of soybean curd. Sorption enthalpy indicated that high moisture content of powder showed lower sorption than that of low moisture content.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3059-3066
• /
• 2008

It is reported that the life of generator stator windings is expected about 30 years and a leak and water absorption phenomena can be progressed by fatigue, vibration, and corrosion. The water-cooled generator stator windings which were operated over 15 years are over 20 units and the mechanical problems such as leak and water absorption were found in the generator stator windings. In this paper, the systematic mechanical integrity evaluation methods which are applied to the water-cooled generator stator windings within the country are introduced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.51-63
• /
• 1999

The effects of high filler loading technique on the reliability of epoxy molding compound (EMC) as a microelectronic encapsulant was investigated. The method of high filler loading was established by the improvement of maximum packing fraction using the simplified packing model proposed by Ouchiyama, et al. With the maximum packing fraction of filler, the viscosity of EMC wart lowered and the flowability was improved. As the amount of filler in EMC increased, several properties such as internal stress and moisture absorption were improved. However, the adhesive strength with the alloy 42 leadframe decreased when the filler content was beyond the critical value. It was found that the appropriate content of filler was important to improve the reilability of EMC, and the optimum filler combination should be selected to obtain high reliable EMC filled with high volume fraction of filler.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.240-243
• /
• 2002

반도체 소자의 고속화， 고접적화에 따라 집적회로의 최소 선폭이 감소할수록 device 의 신호지연, 잡음 및 전력소모 등이 증가하는 문제점이 있다. 이러한 문제점을 개선하기 위해서 저유전율의 층간 절연막이 절대적으로 필요하다. 본 실험에서는 KrF laser 조사를 이용한 표면개질 방법으로 다공성 절연막의 박막특성의 향상을 시도하였다. 다공성 절연막을 층간 절연막으로 응용할 경우 반도체 공정 적용성을 향상시키기 위하여 다공성 절연막의 표면개질이 필요하다. 표면개질 전후의 유전율 변화는 박막을 MIM구조로 측정하였고 화학 구조의 변화는 time-of flight secondary ion mass spectrometry(TOF-SIMS)를 이용하여 관찰하였다. 다공성 실록샌 물질의 pore로 인해서 생긴 누설전류 및 흡습 문제를 개선시키고 유전율을 감소시킬 수 있는 것을 알 수 있었다.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.194-199
• /
• 2002

This study was conducted to develop processing method for vinegar powder from natural vinegar for encapsulation applications. To optimize the spray drying process, experiment was designed by central composition method to find optimal conditions for manufacturing vinegar powder. The acidity, water absorption, solid content and heat stability of vinegar powder were selected as response variables. The optimal concentration of inclusion complex which was made with vinegar and ${\beta}$-cyclodextrin was determined on 30。bx. On increasing the concentration of ${\beta}$-cyclodextrin as a wall material, the quality of the vinegar was decreased. The optimum conditions of spray drying process for manufacturing vinegar powder were 188∼192$^{\circ}C$ and 500∼600 Lh$\^$ -1/ as inlet temperature and flow rate, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.401-401
• /
• 2012

유기발광소자는 유연 소자로의 적용, 자체 발광 등의 장점으로 차세대 디스플레이로서 각광받고 있다. 하지만 유기발광소자는 유기물을 발광층으로 하고 있기 때문에 수분에 취약하다는 단점이 있다. 그래서 봉지 기술(encapsulation)을 필요로 한다. 널리 알려진 방법으로는 유리로 소자를 감싸고 내부에 흡습제를 충진하여 수분 투습을 줄일 수 있다. 하지만 위 기술을 사용할 경우 유기발광소자의 장점인 유연 소자의 적용이 어렵다. 따라서 박막 봉지 기술을 이용하면 보다 얇은 두께의 소자 제작이 가능하고 유연 소자의 적용 역시 가능해진다. 박막 코팅을 이용한 봉지 기술 중 화학적 증착법(Chemical Vapor Deposition, CVD)이나 물리적 증착법(Physical Vapor Deposition, PVD)을 이용하는 방법이 널리 알려져 있지만 원자층 증착법(Atomic Layer Deposition, ALD)을 이용하면 보다 낮은 두께의 치밀한 박막을 제작 할 수 있다. 본 연구는 원자층 증착법을 응용한 분자층 증착법(Molecular Layer Deposition, MLD)을 이용하여 Trimethylaluminum과 Ethylene glycol을 순차적으로 주입함으로써 Alucone 유기 박막을 제작하고 유기발광소자의 봉지 기술로의 적용을 위해 투과 방지막 특성에 관하여 분석했다. 박막 봉지 기술로서 적용하기 위해 제작된 투과 방지막은 원자층 증착법으로 Al2O3무기 박막을 제작하고 분자층 증착법으로 Alucone 박막을 순차적으로 증착하였다. 이를 Ca를 이용하여 전도도를 측정하고, 투습도를 계산하여 투과 방지막 특성을 분석하였다. Alucone 박막은 우수한 투과 방지막 특성을 가지지는 못하지만 적층 구조로 제작함으로써 두 쌍의 Alucone/Al2O3일때, $6.07{\times}10^{-2}g/m^2day$의 투습도를 보여주고 있다. Alucone 박막의 존재는 수분이나 산소의 투과 경로 길이를 늘려줌으로써 Alucone/Al2O3 박막의 투과방지 특성이 향상되는 것으로 사료된다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.143-150
• /
• 2017

Effects of packaging methods for maintaining the shelf-life and postharvest quality of Korean chive (Allium tuberosum Rotter) usually called buchu in Korea was studied during fall season. Buchu, which has high moisture content and active metabolism after harvest, is characterized by the greater changes in quality during storage and distribution. It is usually packaged in paper box during distribution in domestic channel in Korea where the marketability ends within few days of harvest. In order to maintain the commercial quality of buchu, we tried to use inner film with or without absorbent paper in commercial paper box packaging. The 'Greenbelt' cultivar of buchu was harvested in october and packaged in corrugated paper box (A), in corrugated paper box with micro-perforated high density polyethylene (HDPE) film as inner material (B), a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (C) and a combination of HDPE film as inner material along with a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (D), and stored at $5^{\circ}C$ for up to 21 days. Several quality parameters such as fresh weight loss, respiration rate, color, chlorophyll content and sensory qualities were monitored during storage. When buchu was packaged only in paper box, the appearance and quality deteriorated rapidly through decay development thereby sample became unmarketable within 12 days. On the other hand, buchu packaged with inner HDPE film maintained its quality, good visual appearance and exhibited a longer period of marketable life compared to the samples stored in other treatments. However, the use of absorbent paper did not have any significant effect in maintaining quality of buchu. The uses of inner HDPE film was effective in reducing weight loss that resulted better visual appearance of buchu. Results suggest that the use of inner HDPE film in bulk type corrugated paper box packaging and storing at $5^{\circ}C$ could be the optimum condition for commercial storage of buchu. Further investigation on other quality parameters and packaging methods would be useful in maintaining the quality aspects of buchu at postharvest stages.