• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1980

The sorption characteristics of red pepper powder were analyzed in respect to its storing humidities and the types of powder product. The sorption rate of the powder was affected by the humidity values under which it was stored. At low relative humidity values below 70% RH the sorption equilibrium was easily attained, but at the higher humidity over 75% RH the equilibrium state was not reached even after a long period of storage. From the estimation of the sorption rate at arbitrary humidity an empirical equation was obtained; In ${\frac{dw}{dt}}=n\;ln(t)+ln\;c$, where w is moisture content(%) absorbed, t is time (hour) and n and c are empirical constants which were determined from empirical data. Particle sizes and drying methods of red pepper showed little effect on the sorption behavior.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.54-61
• /
• 2005

The absorption characteristics and their physical properties of hot air, vacuum and freeze dried soybean curd powder were investigated. Absorption conditions were at 5, 15, and 25 t with $0.11\~0.93$ water activities. Equilibrium moisture content and the monolayer moisture content determined by prediction models showed highest value in the freeze dried soybean curd powder due to porous structure. Absorption energy decreased with increasing water activity was not affected by drying method. In the comparisons of the isothermal absorption models, Oswin model generally was the best fit model for isothermal adsorption of soybean curd powder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3442-3447
• /
• 2014

A simple method to evaluate the hygroscopic characteristics of polymer of microelectronic plastic package is suggested. To evaluate the characteristics, specimens were prepared, and the internally absorbed moisture masses were measured as a function of the absorbing time and calculated numerically. The hygroscopic pressure ratio was calculated by heat transfer analysis supported by commercial FEM code because the hygroscopic diffusion equation has the same form as the heat transfer equation. The moisture masses were then summed by the self developed code. The nonconductive polymers had quite different characteristics for the different lots, even though they were the same products. The absorbed moisture mass variations were calculated for several different characteristics, and the optimal curve of the mass variation close to experimental data was selected, whose solubility and diffusivity were affected by the hygroscopic characteristics of the material. The method can be useful in the industrial fields to quickly characterize the polymer material of the semiconductor package because the fast correspondence is normally required in industry. The weight changes in the aluminum-nonconductive-polymer joint due to moisture absorption were measured. The deformed system was also measured using the Moire Interferometry system and compared with the results of finite element analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.110-120
• /
• 1999

Transient hygrothermal stresses in an infinitely long hollow cylinder subjected to heating in hygroscopic environments at the surfaces are studied. The equations of hygrothermoelasticity based on the plane strain assumption are formulated by considering the coupling effects between heat and moisture. A closed form solution for the transient hygrothermal stresses is obtained by using decoupling techniques and the method of separation of variables. Numerical results including distributions of temperature and moisture concentration are presented. Effects of transient hygrothermal characteristics are clearly shown in both displacements and stress distributions in the wall of hollow cylinder.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.264-269
• /
• 1999

The effects of film thickness and moisture absorbing materials(MAM) on the ginger qualities were investigated during MA storage for 150 days. LDPE films of 0.04, 0.06 and 0.08mm thicknesses were applied to select the adequate film in gas permiability. MAMs of sheet and sachet type were applied to 0.06mm-LDPE film bag to prevent moisture condensation during storage. Thickness of film used affected neither weight loss nor firmness of gingers during U storage. But the thinner in thickness showed the less changes in sprouting, spoilage and reducing sugar. Moreover, compared with MAP alone, MAPs with MAM of both sachet and sheet styles led to the weight loss of gingers increasing by more than 3-4 times, but sprouting rate, spoilage rate and reducing sugar decreasing by 3.3, 1.4 and 2.3 times, respectively. These results showed that MAP with UM was significantly effective to prolong the freshness of ginger by longer than 2 times, compared with MAP alone.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.211-216
• /
• 2003

Absorption characteristics of hot air-. vacuum-, and freeze-dried ginger powder were investigated. Monolayer moisture content as determined by GAB equation was $0.257{\sim}0.540\;H_2O/g$, showing higher significance than BET equation. Absorption enthalpy was calculated based on different drying methods and water activities. Absorption energy decreased with increasing water activity but was not affected by drying method. Isotherm curves showed a typical sigmoid form. Among models applied for predicting equilibrium moisture content, Caurie model was the best fit model for ginger powder, showing the lowest prediction deviation of $1.2{\sim}5.4%$, followed by Henderson then Bradley models. The prediction model equations for the moisture content were established by in(time), water activity, and temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.625-629
• /
• 2015

In this study, we develop a prognostic method of assessing the stator windings of power generators against water absorption through statistical data analysis and degradation modeling. The 42 windings of the generator are divided into two groups: the absorption and normal groups. A degradation model of a winding is constructed using Fick's second law to predict the level of absorption. By analyzing data from the normal group, we can determine the distribution of the data of normal windings. The health index of a winding is estimated using the directional Mahalanobis distance (DMD) method. Finally, the probability distributions of the failure time of the windings are determined.

• Composites Research
• /
• v.30 no.6
• /
• pp.371-378
• /
• 2017

In this study, hygroelastic behavior of thermosetting epoxy is predicted by molecular dynamics simulations. Since consistent exposures to humid environments lead to macroscopic degradation of polymer composite, computational simulation study of the hygroscopically aged epoxy cell is essential for long-time durability. Therefore, we modeled amorphous epoxy molecular unit cell structures at a crosslinking ratio of 30, 90% and with the moisture weight fraction of 0, 4 wt% respectively. Diglycidyl ether of bisphenol F (EPON862) and triethylenetetramine (TETA) are chosen as resin and curing agent respectively. Incorporating equilibrium and non-equilibrium ensemble simulation with a classical interatomic potential, various hygroelastic properties including diffusion coefficient of water, coefficient of moisture expansion (CME), stress-strain curve and elastic modulus are predicted. To establish the structural property relationship of pure epoxy, free volume and internal non-bond potential energy of epoxy are examined.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.128-137
• /
• 1999

In this study, shiitake mushrooms were dried by hot air, vacuum and freeze drying methods and theire physical properties were compared. Since the pore size affects the amount of absorption, the characteristics of water sorption were investigated at various humidities and temperatures. Results showed that the freeze dried product had the greatest pore area and the highest absorption capacity. However, all the dried samples showed similar quality. The browning degrees were severely changed with increased relative humidities and temperatures. Among these drying methods, the freeze drying gave the greatest change in browning degree. The GAB monolayer moisture contents of the dried shiitake mushroom were $5.3{\sim}7.7%$. The prediction model was also provided using parameters such as relative humidity, temperature and pore area.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.6
• /
• pp.479-484
• /
• 2001

The absorption characteristics of persimmon powder related to different drying methods and various storage temperatures was investigated. The physical properties of persimmon powder by different drying methods displayed the largest amount of porosity in the freeze-dried sample, and the smallest in hot air dried sample. Equilibrium moisture was reached in 6 days. Monolayer moisture contents were predicted to 0.09687~0.19712(freeze drying), 0.07820~0.18617(vacuum drying) and 0.07715~0.18056(hot air drying) g H2O/g solid respectively using the BET equation. BET equation for isothermal absorption curve showed over 0.95 R-square for all dried methods. Monolayer moisture contents were increased as storage temperature was incremented because water molecular movement was more active and there was a greater chance to clash with the absorption surface area.