• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.311-316
• /
• 2015

This paper presents a design method for thin but wideband absorbers using resistive sheets. Its equivalent circuit consists of a series RLC resonant circuit and a short-terminated transmission line. Based on this equivalent circuit, we presented the three conditions for an electromagnetic absorber which has a thickness less than a quarter wavelength and wide absorption bandwidth at center frequency. By using an root-finding algorithm, the equivalent resistance, capacitance, and inductance of the absorbers are obtained. These equivalent circuit values for the absorber surface can be realized by a 2D periodic cross-shaped structure which has required surface resistance. Using the design method, we have designed the absorber which has 18.75 mm($67.5^{\circ}$ electrical length) thickness and 90 % absorption bandwidth of 116 % bandwidth at 3 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.884-890
• /
• 2003

In order to reduce the specific absorption rate(SAR) in a human head exposed to electromagnetic fields radiated by a cellular phone, we have analyzed an electromagnetic wave absorber attached to the handset. A manufactured electromagnetic wave absorber was composed of Mn - Zn, which had complex relative permittivity of 7.30-j0.05 and permeability of 2.20-i1.55. The SAR value from the electromagnetic wave absorber attachment was calculated by using the nonuniform finite difference time domain(FDTD) algorithm and measured by phantom model at 835 MHz. The SAR reduction due to the electromagnetic wave absorber are about 18 % at 835 MHz. The V.S.W.R and radiation pattern of antenna are good agreement with the normal antenna. The gain reduction due to the electromagnetic wave absorber are only 0.3 dB at 835 MHz. But the sensitivity of cellular phone generally improves about 1 dB.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.91-95
• /
• 2000

A new damping composite materials with asphalt and EM absorber are studied for high advantage values. The composite Ni-Zn ferrite and dielectric PZT with a main material is well developed of EM absorbing, and is continuous maintained of origin character, damping absorbing. Experiments and calculation results are shown to act two points frequencies at 928MHz and from 2MHz to 4GHz below -l0dB The narrow band widths of ferrite change to broad band as insert of dielectric material, PZT good of EM wave absorbtion and broad band widths in multi layers with ferrite These are applied to develop of new material at new need frequencies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.426-426
• /
• 2011

최근 들어 금속물질을 나노미터 단위로 구성할 수 있는 기술이 진보하면서, 금속 나노입자에 의해 발생되는 표면 플라즈몬에 대해서도 다양한 분야의 관심이 집중되고 있다. 유전체 물질을 기지상으로 하는 금속:유전체 나노복합체에서 금속 나노입자는 자유전자들의 집단 진동인 국소표면 플라즈몬 공진(Localized Surface Plasmon Resonance, LSPR)현상에 의해 국부전기장을 증대 시키고, 가시광 및 적외선 영역에서 특성 광흡수 거동을 보인다. 이와 같은 광학적 특성은 금속 나노입자들의 크기, 형태, 그리고 나노입자들의 주변을 구성하는 기지상 물질의 종류에 의해 조절된다. 금속:유전체 나노복합체에 나타나는 이러한 특성은 단순장식코팅 뿐만 아니라 광의 효율적 운용과 광을 매개로 한 기능발현을 필요로 하는 디스플레이, 광학 스위칭 소재 및 태양전지의 효율 향상을 위한 광흡수층 등 매우 다양한 응용이 가능하다. 본 연구에서는 다양한 굴절률을 갖는 재료들 중, 저굴절률을 갖는 SiO2와 고굴절률을 갖는 ZnS-SiO2를 기지상 재료로 선택하여 교번증착 스퍼터링법으로 Ag와 Au입자를 형성시켰다. Ag를 금속나노입자로 갖고, SiO2와 ZnS-SiO2를 기지상으로 하는 금속:유전체 나노복합체에서는 금속나노입자 형성에 따른 뚜렷한 표면 플라즈몬 공진 광흡수 피크가 관찰된 반면 Au나노입자는 기지상에 따라 각기 다른 광흡수 특성을 나타냈는데, SiO2기지상에서 명확한 광흡수 피크를 형성했던 경우와는 달리 ZnS-SiO2기지상에서는 특정파장에서의 흡수피크로 규정되기 어려운 넓은 파장범위에 걸친 완만한 광흡수 피크를 나타냈다. TEM 분석을 통해, ZnS-SiO2 기지상 내의 Au입자는 각각 독립되어 있는 Island형태가 아닌 유전체 기지상과 대칭적으로 혼합된 네트워크 형태의 Bruggeman 기하구조를 구성하고 있음을 확인하였고, 이는 Au입자가 형성되고 성장할 때 Au와 S의 높은 결합에너지로 인해 상당한 젖음 특성을 갖고 성장하였기 때문으로 판단됐다. 따라서 나노복합체를 구성하는 물질간의 광학적 특성뿐만 아니라 기지상 내에서의 금속입자의 성장거동에 대한 연구가 수반되었을 때, 금속:유전체 나노복합체의 표면 플라즈몬 공진 광흡수 특성을 보다 정확하게 제어할 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.296-304
• /
• 1998

A design method of an electromagnetic wave absorber with ferrite fins in the second layer, which has very wide band frequency characteristics and is used for single-polarized wave absorption such as TV wave etc, has been designed. To examine the effectiveness of the Equivalent Material Constants Method$(EMCM)^{[1]}$ which is approximate method, the effective complex permittivity calculated by the Hashin-Strikman formulas and the EMCM are compared. Since, furthermore, the reflectivities by the EMCM in space and the FDTD method in an rectangular waveguide agreed well each other, it has been confirmed that the proposed electromagnetic wave absorber has excellent absorption characteristics in the frequency range of 30 MHz to 5830 MHz. Thus, it can be concluded that the EMCM is usefull to design and analyze the electro-magnetic wave absorber proposed here.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.671-674
• /
• 2007

In this paper, the EM wave absorber was designed and fabricated for ETC system, because ETC system has some problems including signal error and system-to-system interference. We fabricated some samples in different composition ratio of MnZn-ferrite, Carbon and CPE, confirmed that optimum composition ratio of Mn2n-ferrite, Carbon, CPE was 40 : 15 : 45 wt%. Complex relative permittivity and complex relative permeability was calculated by the measured data. And absorption abilities were simulated according to different thickness of the EM wave absorbers using complex relative permittivity and permeability. The EM wave absorber was fabricated based on simulated data Simulated and measured values agree well. As a result, the developed EM wave absorber has a thickness of 3.38 mm and absorption ability over 20 dB at 5.8 GHz.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.367-379
• /
• 2022

In this paper, a multilayer radar absorbing structure was designed using the Particle Swarm Optimization (PSO) algorithm, and the characteristics of the multilayer radar absorbing structure were analyzed. It was shown that design values can be derived quickly and accurately by applying PSO to the design of a multilayer radar absorbing structure, and it is also shown that the optimal multilayer radar absorbing structure can be designed especially for an oblique incident. In addition, it was shown that the optimal value that meets the performance requirements can be determined even in a combination of various design parameters. It is presented through a comprehensive flowchart including the equations and detailed descriptions of all variables for each step. From the results of this paper, it is possible to omit complex and many calculations for designing a multilayer radar absorbing structure, and it is possible to use various composite materials. It can be utilized in the design and development of multilayer radar absorbing structures.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.120-121
• /
• 2004

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.244-249
• /
• 2008

In this paper, we designed and fabricated the EM wave absorber consists of Sendust and Mn-Zn ferrite for suppressing EM wave noise from PCB in ISM(Industrial, Scientific and Medical) band of 2.4 GHz. We fabricated several samples in different ratios of Sendust to Mn-Zn ferrite with CPE(Chlorinated Ploy-ethylene) as binder and confirmed that optimum composition ratio of absorbing materials was Sendust. Mn-Zn ferrite : CPE=70:5:20 wt.%. The absorbing abilities were simulated according to different thickness of EM wave absorber as the function of material constants calculated by measured data. Measured absorption ability was analyzed and compared with simulated result. The simulated result agree well with the measured ones. As a result, the developed EM wave absorber with thickness of 0.85 mm has absorption ability of 5.4 dB at 2.4 GHz and over 3 dB in frequency rage of 1.4$\sim$4.1 GHz.