• Title/Summary/Keyword: 흄

검색결과 152건 처리시간 0.022초

대형조선소 천장크레인 운전원의 용접흄 노출 실태 (Exposure status of welding fumes for operators of overhead traveling crane in a shipyard)

  • 이경민;김부욱;곽현석;하현철
    • 한국산업보건학회지
    • /
    • 제25권3호
    • /
    • pp.301-311
    • /
    • 2015
  • Objectives: Operators of overhead traveling crane in a ship assembly factory perform work to transmit large vessel blocks to an appropriate working process. Hazardous matters such as metal dusts, carbon monoxide, carbon dioxide, ozone, loud noise and fine particles are generated by variable working activities in the factory. The operators could be exposed to the hazardous matters during the work. In particular, welding fumes comprised of ultra fine particles and heavy metals is extremely hazardous for humans when exposing a pulmonary through respiratory pathway. Occupational lung diseases related to welding fumes are increasingly on an upward tendency. Therefore, the objective of this study is to assess properly unknown occupational exposure to the welding fumes among the operators. Methods: This study intended to clearly determine an equivalence check whether or not chemical constituents and composition of the dusts, which existed in the driver's cab, matched up with generally known welding fumes. Furthermore, computational fluid dynamics program(CFD) was used to identify a ventilation assessment in respect of a contamination distribution of welding fumes in the air. The operators were investigated to assess personal exposure levels of welding fumes and respirable particulate. Results: The dust in an operation room were the same constituents and composition as welding fumes. Welding fumes, which caused by the welding in a floor of the factory, arose with an ascending air current up to a roof and then stayed for a long time. They were considered to be exposed to the welding fumes in the operation room. The personal exposure levels of welding fumes and respirable particulate were 0.159(n=8, range=0.073-0.410) $mg/m^3$ and 0.138(n=8, range=0.087-0.178) $mg/m^3$, respectively. They were lower than a threshold limit value level($5mg/m^3$) of welding fumes. Conclusions: These findings indicate that an occupational exposure to welding fumes can exist among the operators. Consequently, we need to be keeping the operators under a constant assessment in the operator process of overhead traveling crane.

유시진 만화의 환상성 변이 연구 (A Study on the modification of fantastique mode in You, Sijin's comic strips)

  • 장은영;김미림
    • 만화애니메이션 연구
    • /
    • 통권24호
    • /
    • pp.25-48
    • /
    • 2011
  • 환상은 역사적인 측면과 공시적 측면을 살펴 볼 때, 크게 경이와 기괴의 두 가지 계열성을 가지며 다양한 의미체계를 가진다. 경이는 고전적인 형이상학체계와 마법담의 전통을 한 축으로 하는 조화롭고 풍부한 환상의 세계이고, 기괴는 근현대의 문제적 의식으로부터 출발하여 부조리와 부정적 진실을 발견하고자 하는 전복적인 환상 세계이다. 만화에서는 매체적 특징상 리얼리티보다 환상을 사용하기가 유리하다. 그러나 환상과 만화의 연관관계가 구체적으로 논의된 바는 드물다. 본 논문은 환상에 대해 기괴와 경이의 계열성으로 이해하는 데서부터 출발하여 기괴와 경이의 다양한 조합을 드러낸 만화작가 유시진의 작품들의 경향을 살펴봄으로써 각 계열의 환상이 만화의 개별 작품의 스타일과 주제의식에 어떻게 영향력을 주고받는지 알아보았다. 작가 유시진은 현대 작가답게 기괴 계열의 감성으로 작품을 시작하였으나 자의식과 관련된 주제를 발전시켜가면서 동시에 견고한 2차세계의 경이계열 환상세계를 구축하고자 노력했다. 그러나 "신명기"에서 환상세계가 작품의 주제를 압도하는 양상을 겪었다. 이후 작품인 "폐쇄자"와 "온"에서는 자의식을 붕괴하고, 새롭게 만들어가는 과정을 혼합된 환상양식을 통해 이루었고, 이러한 터닝 포인트 이후 유시진의 작품은 주제의식과 환상양식에 있어서 보다 일관되게 기괴 계열의 성향을 드러내고 있다.

용접공정에서 발생된 공기중 흄의 조성과 농도에 영향을 미치는 요인에 관한 연구 (A Study on Factors Affecting Airborne Fume Composition and Concentration in Welding Process)

  • 신용철;이광용;박승현;이나루;정지연;박정근;오세민;문영한
    • 한국산업보건학회지
    • /
    • 제7권2호
    • /
    • pp.181-195
    • /
    • 1997
  • The purpose of this study was to investigate factors affecting the composition and concentrations of fumes generated from various types of welding processes. The results are as follows. 1. Iron(Fe), zinc(Zn) and manganese(Mn) were predominant in Welding fumes. The Fe content in total fumes was 25.5% in coated electrode and 28.2% in $CO_2$ are welding, and the Zn content was 4.5% and 9.1%, respectively, and the Mn was 3.6% and 7.8%, respectively. 2. It was found that the important factors determining composition and concentration of fumes were type of industries, type of welding processes, type and composition of electrodes, composition of base metals, confinement of workplaces or condition of ventilation, work intensity, coated metals such as lead and Zn in paint. 3. The Mn content in airborne fumes was highly correlated with that of electrode(r=0.77, p<0.01) and was about 4 times higher than that in electrodes or base metals. The results lindicate that Mn is well evaporated into air during welding. The higher vapor pressure of Mn may explain this phenomenon. 4. the airborne total fume concentrations were significantly different among types of industries(p<0.001). The airborne total fume concentration was higher in order of sleel-structure manufacturing($GM=15.1mg/m^3$), shipbuilding($GM=13.2mg/m^3$), automobile-component manufacturing ($GM=7.8mg/m^3$) and automobile assembling industry($GM=3.0mg/m^3$) 5. The airbone total fume concentration was 6 times higher in $CO_2$ welding than in coated electrode welding, and approximately 3 times higher in confined area than in open area, in steel-structure manufacturing industry. 6. The concentration of welding fume outside welding helmet was about 2 times higher than that inside it. It is recommened that air sampling be done inside helmet to evaulate worker's exposure accurately, for it has an outstanding effect on reducing worker exposure to fumes and other contaminants.

  • PDF

CO2 용접에서 용접변수의 변화에 따른 용접흄 제어방법에 관한 연구 (A Study on Control of Fume for Various Parameters in CO2 Welding)

  • 오광중;김현수;손병현;지해성
    • 한국산업보건학회지
    • /
    • 제8권1호
    • /
    • pp.76-87
    • /
    • 1998
  • The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

  • PDF

산업부산물인 가네트를 이용한 콘크리트의 성질개선에 관한 기초적 연구 (The Fundamental Study on Properties of Concrete Using the Garnet with Industrial Wastes)

  • 임병호;박정민;김태곤;김화중
    • 콘크리트학회지
    • /
    • 제11권1호
    • /
    • pp.183-190
    • /
    • 1999
  • 본 연구는 부존자원의 고갈화 문제에 따른 신소재 개발이라는 성자원적인 측면과 산업부산물의 재활용이라는 환경친화적인 측면에 상응하여 현재 경북지역에서 발생하는 산업 폐기물인 가네트를 대상으로 제반 물성 실험을 통하여 콘크리트 제조시 활용할 수 있는 방안에 대해 실험실적을 통해 그 가능성을 검토하였다. 그 결과 가네트 미분말은 포졸란 반응성과 상관관계를 갖는 실리카와 알루미나의 함유량이 약 50% 정도로써 화학조성상 혼화재로서 사용 가능성을 보여 주었으며, 응결시간은 가네트 치환량이 많아 질수록 다소 줄어드는 것으로 나타났으며, 플로우 시험결과 일반 모르터에 비해 가네트의 사용량이 많아짐에 따라 플로우치가 약간씩 증가하는 경향을 보이며 콘크리트에 활용시 시공연도를 증진시켜 줄 것으로 기대된다. 또한 모르터에 대한 압축강도 시험결과 물결합재비에 따라 약간씩의 차이는 있지만 대체적으로 일반 모르터에 비해 약간씩 압축강도를 상회하고 있으며 최고의 강도 발현율은 치환율 10% 정도로 사료되며, 기존 혼화재(실리카 흄, 플라이애쉬)에 비해 동수준의 강도 발현율을 나타냄으로써, 콘크리트 제조시 시멘트 절감효과 및 성질개선을 위한 혼화재로써의 사용가능성을 보여 주었다.

용접흄 충 금속함량 변화에 관한 연구 (A Study on the Content Variation of Metals in Welding Fumes)

  • 윤충식;박동욱;박두용
    • 한국환경보건학회지
    • /
    • 제28권2호
    • /
    • pp.117-129
    • /
    • 2002
  • Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

설계강도 80MPa 3성분계 고강도내화콘크리트의 현장적용 및 성과분석 (Field Application of 80MPa High Strength Fire Resistant Concrete using Ternary Blended Cement)

  • 김성덕;김상연;배기선;박수희;이범식
    • 한국건축시공학회지
    • /
    • 제10권5호
    • /
    • pp.113-119
    • /
    • 2010
  • 설계강도 80 MPa인 고강도 콘크리트가 B/P에서 대량 생산, 공급되는 현장조건하에서도 시험실 조건과 동일한 재료물성을 발휘하는지 여부를 평가하기 위하여 내화시험과 시험시공을 수행하고, 그 결과를 평가하였다. 내화성능평가 결과, 복합섬유(PP섬유, NY섬유)를 0.075 %혼입한 80 MPa의 고강도 콘크리트가 내화성능과 폭렬방지 성능이 우수한 것으로 나타났다. 고강도 콘크리트 시험시공 결과, 압송 전에는 공기량, 유동성, 압축강도 등을 모두 만족하였으나, 압송 후에는 슬럼프 플로가 목표물성보다 다소 작게 평가되어 개선이 필요한 것으로 판단되었다. 고강도 콘크리트의 수화온도 역시 관련 기준을 만족하였다. 고강도 콘크리트의 단위시간당 타설량은 약 $44m^3$로 우수한 것으로 나타났으며, 충전성 또한 매우 우수한 것으로 평가되었다. 개발된 3성분계 고강도 콘크리트는 실리카 흄이 사용된 기존 고강도콘크리트와 비교하여 경제적이며 경화 전 후의 재료물성과 시공성이 우수하여 초고층 구조물의 건립 시 유용하게 활용될 수 있을 것으로 판단된다.

건설현장 용접직종별 용접흄 및 금속류 노출 실태 (Welding Fume and Metals Exposure Assessment among Construction Welders)

  • 박현희;박해동;장재길
    • 한국산업보건학회지
    • /
    • 제26권2호
    • /
    • pp.147-158
    • /
    • 2016
  • Objectives: The objective of this study was to evaluate the assessment of exposure to welding fume and heavy metals among construction welders. Methods: Activity-specific personal air samplings(n=206) were carried out at construction sites of three apartment, two office buildings, and two plant buildings using PVC(poly vinyl chloride) filters with personal air samplers. The concentration of fumes and heavy metals were evaluated for five different types of construction welding jobs: general building pipefitter, chemical plant pipefitter, boiler maker, ironworker, metal finishing welder. Results: The concentration of welding fumes was highest among general building pipefitters($4.753mg/m^3$) followed by ironworkers($3.765mg/m^3$), boilermakers($1.384mg/m^3$), metal finishing welders($0.783mg/m^3$), chemical pipefitters($0.710mg/m^3$). Among the different types of welding methods, the concentration of welding fumes was highest with the $CO_2$ welding method($2.08mg/m^3$) followed by SMAW(shield metal arc welding, $1.54mg/m^3$) and TIG(tungsten inert gas, $0.70mg/m^3$). Among the different types of workplace, the concentration of welding fumes was highest in underground workplaces($1.97mg/m^3$) followed by outdoor($0.93mg/m^3$) and indoor(wall opening as $0.87mg/m^3$). Specifically comparing the workplaces of general building welders, the concentration of welding fumes was highest in underground workplaces($7.75mg/m^3$) followed by indoor(wall opening as $2.15mg/m^3$). Conclusions: It was found that construction welders experience a risk of expose to welding hazards at a level exceeding the exposure limits. In particular, for high-risk welding jobs such as general building pipefitters and ironworkers, underground welding work and $CO_2$ welding operations require special occupational health management regarding the use of air supply and exhaust equipment and special safety and health education and fume mask are necessary. In addition, there is a need to establish construction work monitoring systems, health planning and management practices.

배합조건 및 다짐하중에 따른 포러스 콘크리트의 특성에 관한 실험적 연구 (An Experimental Study on the Properties of Porous Concrete according to the Mix Factors and Compaction Load)

  • 임서형
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권3호
    • /
    • pp.83-91
    • /
    • 2015
  • 포러스 콘크리트는 시멘트, 물 그리고 굵은골재로 구성되어 있으며, 공기 및 물의 투과 그리고 흡음 등 지구 환경부하를 저감시키기 위해 사용되어 왔다. 그러나 포러스 콘크리트의 물리적, 역학적 성상은 시공시 이루어지는 다짐하중에 의해 변한다. 따라서 본 연구에서는 결합재 종류, 물-결합재비, 목표공극율에 따른 포러스 콘크리트의 물리적, 역학적 성상을 파악하였으며 특히, 다짐하중에 따른 포러스 콘크리트의 공극율, 강도, 투수계수의 물성변화를 파악하였다. 본 연구에서 사용한 골재는 부순자갈 생산과정에서 발생되는 부산물로서 최대크기는 13mm이다. 연구결과, 포러스 콘크리트의 목표 공극율, 투수계수, 압축강도는 공극율과 밀접한 상관성을 지니고 있으며, 공극율은 포러스 콘크리트의 배합설계로 제시할 수 있는 가능성이 있는 것으로 판단되다. 포러스 콘크리트의 압축강도는 팽창재 치환율 5%에서 가장 높게 나타났으며, 실리카 흄 치환율 10%에서 치환하지 않은 콘크리트보다 32% 높게 나타났다. 그리고 다짐하중을 변화시킨 본 연구결과 압축강도는 하중 15kN부터 증가하였고, 공극율은 하중 0.8kN부터, 투수계수는 하중 35kN부터 각각 감소하는 것으로 나타났다.

고성능 하이브리드 섬유 보강 콘크리트의 휨 및 유동 특성 (Flexural and Workable Properties of High Performance Hybrid Fiber Reinforced Concrete)

  • 박춘근;노명현;박대효
    • 콘크리트학회논문집
    • /
    • 제17권4호
    • /
    • pp.543-550
    • /
    • 2005
  • 본 연구에서는 마이크로 섬유인 탄소섬유와 매크로 섬유인 강섬유가 서로 하이브리드 형태로 결합되고 미세한 광물 혼화재인 실리카퓸이 치환된 고성능 하이브리드 섬유보강 콘크리트(HPHFRC)의 파괴계수(MOR), 휨인성 특성($I_30$$W_{2.0}$), 유동성(슬럼프)이 분산분석(ANOVA)을 통해 특성화된다. MOR I30(또는 $W_{2.0}$), 슬럼프 데이터들은 휨 성능과 유동성을 평가하기 위한 특성치로 사용된다. 특히, 실험회수를 줄이기 위하여 일부실시 직교배열에 따라 실험이 계획된다. 각 특성인자를 각 실험인자에 대해서 평가한 결과, 강섬유는 MOR 과 $I_{30}$의 특성인자 측면에서 상당히 유의한 실험인자로 나타난다. 또한 분산분석 결과, 실험인자의 유의도에 따라 다음과 같은 평가가 이용될 수 있다 유동성(슬럼프) 감소는 실리카 흄, 강섬유, 탄소섬유 실험인자 순서로 유의하게 나타난다. MOR 향상은 실리카퓸($\fallingdotseq$ 탄소섬유), 강섬유 실험인자 순서로 유의한 것으로 나타난다. 휨인성 증진은 실리카퓸, 탄소섬유, 강섬유 실험인자 순서로 유의하게 나타난다. 실험범위 내에서 강섬유 $1.0\%$, 탄소섬유 $0.25\%$, 실리카퓸 $5.0\%$의 조합이 각 특성치들을 가장 우수하게 향상시키고 유동성이 확보된 실험 조건으로 도출된다.