• Tunnel and Underground Space
• /
• v.34 no.5
• /
• pp.449-460
• /
• 2024

The roughness of rock joint surfaces is considered a critical factor in determining the stability of underground spaces and tunnels, leading to attempts to measure it using various devices. This study explored the applicability of portable 3D scanner for measuring rock joint roughness in comparison to laser scanner. By constructing various one-dimensional roughness profiles using laser scanner and portable 3D scanner, and calculating the Z₂(statistical roughness parameter) for comparison, it was found that the portable 3D scanner tends to underestimate roughness compared to the laser scanner. The variations in roughness and Z₂ showed very similar patterns between the two devices. Through Direct shear tests that induced wear on the specimens, differences in roughness and Z₂ due to wear were compared using the portable 3D scanner, confirming variations in roughness height and Z₂ related to wear.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.135-137
• /
• 2013

본 논문은 포인터 레이저를 이용한 3D 스캔방식을 제안한다. 3D 스캔이란 물체의 3차원 정보(x, y, z)를 추정하는 기술이다. 3D 스캔 기술은 과거에서부터 많은 연구가 진행 되었으며 스테레오 카메라, 패턴 인식 등 다양한 방식으로 3파원 정보를 추정 한다. 기존의 방식들은 물체의 표면 정보를 정확하게 스캔하는 장점을 가졌지만, 스캐너의 비용이 비싸고, 그 부피가 크다는 단점 때문에 상용화에 어려움이 많다. 본 논문은 기존 방법보다 부피가 작고 가벼우며 시스템 비용이 적은 포인터 레이저를 이용하여 3차원 정보를 추정하는 방법에 대하여 설명한다. 물체의 깊이 정보(z)에 따른 포인터 레이저의 영상에서의 위치 변화를 통하는 방식으로 3차원 정보 추정을 구현 하였다. 실험을 통하여 포인터 레이저만으로 3차원 정보가 추정 되는 것을 확인한다. 위 방법은 3D 스캐너의 부피가 최소화 되므로 다양한 제품에 부착되어 3D 스캐너의 상용화를 기대한다.

• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.26-35
• /
• 2019

In designing a gravity-type anchorage of earth-anchored suspension bridge, the contact friction between a blasted rock mass and the concrete anchorage plays a key role in the stability of the entire anchorage. Therefore, it is vital to understand the shear behavior of the interface between the blasted rock mass and concrete. In this study, a portable 3D LiDAR scanner was utilized to scan the blasted bottom surfaces, and rock surface roughness was quantitatively analyzed from the scanned profiles to apply to 3D FEM modelling. In addition, based on the 3D FEM model, a three-dimensional dynamic fracture process analysis (DFPA-3D) technique was applied to study on the shear behavior of the interface between blasted rock and concrete through direct shear tests, which was analyzed under constant normal load (CNL). The effects of normal stress and the joint roughness on shear failure behavior are also analyzed.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2019

To estimate daily canopy photosynthesis, accurate estimation of canopy light interception according to a daily solar position is needed. However, this process needs a lot of cost, time, manpower, and difficulty when measuring manually. Various modeling approaches have been applied so far, but it was difficult to accurately estimate light interception by conventional methods. The objective of this study is to estimate the spatial distributions of light interception and photosynthetic rate of paprika with time by using 3D-scanned plant models and optical simulation. Structural models of greenhouse paprika were constructed with a portable 3D scanner. To investigate the change in canopy light interception by surrounding plants, the 3D paprika models were arranged at $1{\times}1$ and $9{\times}9$ isotropic forms with a distance of 60 cm between plants. The light interception was obtained by optical simulation, and the photosynthetic rate was calculated by a rectangular hyperbola model. The spatial distributions of canopy light interception of the 3D paprika model showed different patterns with solar altitude at 9:00, 12:00, and 15:00. The total canopy light interception decreased with an increase of surrounding plants like an arrangement of $9{\times}9$, and the decreasing rate was lowest at 12:00. The canopy photosynthetic rate showed a similar tendency with the canopy light interception, but its decreasing rate was lower than that of the light interception due to the saturation of photosynthetic rate of upper leaves of the plants. In this study, by using the 3D-scanned plant model and optical simulation, it was possible to analyze the light interception and photosynthesis of plant canopy under various conditions, and it can be an effective way to estimate accurate light interception and photosynthesis of plants.