• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.9-16
• /
• 2019

The experiment on the liquid jet in crossflow in supersonic BFS (backward-facing step) flow was conducted to investigate the mixing characteristics. The working fluids are nitrogen and water. The shadow graph technique was used to visualize the flow field. Images captured by the high-speed camera were applied to analyze the flow phenomena. The liquid jet was injected at the re-circulation zone created by the supersonic jet flow. Experimental conditions are defined based on the pressure of the nitrogen gas chamber and pressurized liquid tank. In respective cases, the penetration depth of liquid jet and location of the Mach disc were observed to be proportional to the momentum ratio of gas and liquid jets.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.140-147
• /
• 2020

This study analyzed the longevity of preformed metal crowns (PMCs) in first permanent molars and evaluated factors influencing their survival during a long-term follow-up period. In all, 115 first permanent molars treated with PMCs between June 2008 and June 2018 were retrospectively analyzed. The overall combined success rate for the study group was 84.3%. The 5-year survival rate was 82.8%. Multivariate Cox regression analyses identified distal cavities and mandibular PMC placement as risk factors for restoration failure. Careful placement of PMCs at the final try-in stage augments the longevity of the crown.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.363-367
• /
• 2016

A test section of a supersonic wind tunnel was designed for the analysis of flow characteristics over a backward-facing step with Mach 1.0 slot injection in a supersonic flow of Mach 2.5. The cavity flow of a high-speed vehicle is very complex at supersonic speed, so it is necessary to do experiments using supersonic wind tunnels to verify numerical analysis methods. The previous 2D symmetrical nozzle was replaced with an asymmetrical nozzle. The inviscid nozzle contour was designed using Method of Characteristics (MOC), and the boundary layer thickness correction was reflected by experimental data from the wind tunnel. The results were compared with a CFD analysis. The PID control system was changed to be based on the change of tank pressure. This improved the control efficiency, and the run times of supersonic flow increased by about 1 second. The flow characteristics over a backward facing step with slot injection were visualized by a Schlieren device. This equipment will be used for an experimental study of the film cooling effectiveness over a cavity with various velocities, mass flows, and temperatures.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.315-321
• /
• 2011

The goal of this study is to reduce patient exposure dose by providing image quality and radiation dose according to inspection methods. Volume Computed Tomography Dose Index(CTDIvol) and Dose Length Product(DLP) of prospective and retrospective ECG gating snapshot segment of Coronary CT angiography(CTA) were measured each snapshot segment methods. CT number, noise, uniformity, and resolution were also measured using phantom under the same condition of coronary CTA. The results showed that CT number, noise, uniformity and resolution are similar to each other. In terms of CTDIvol and DLP, however, measurement dose of prospective ECG gating snapshot segment was lower than the retrospective case by 37.5% and 40.3%. Therefore, it is highly recommended that in the coronary CTA, prospective ECG gating scan mode should be chosen to reduce patient dose.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.27-34
• /
• 2016

Purpose : Retrospective evaluation of setup changes using the corrected position during helical tomotherapy Materials and Methods : Head and neck cancer patients were randomly sampled and summarized into 3 groups: Group 1(32) Brain, Group 2 2(28)Maxillar, Nasal cavity, Group 3 (35) Nasopharynx(NPX), Tongue, Tonsil, and Oropharynx(OPX). In 3 groups, the statistical tests based on repeated measurements among 30 times of the duration of treatment by applying X, Y, Z axis errors, roll, weight changes, and vectors as variables. Results : The statistical test results showed that there was no difference between x-axis (p = 0.458) and y-axis (p=0.986) and in roll (p = 0.037), weight change (p <0.001), and the vector (p <0.001). In addition, the pattern between the three groups based on the fraction revealed no difference in x-axis (p = 0.430) and roll (p = 0.299) but a difference in y-axis (.023), weight change (p = 0.001), and vector (p = 0.028). Conclusion : The results of the retrospective evaluation found the change in the group 3 with respect Y, Z, weight, and vector and a larger random error during the treatment including low neck.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.147-157
• /
• 2022

The backward-facing step (BFS) is a benchmark geometry for analyzing flow separation occurred at the edge and resulting development of shear layer and recirculation zone that are occupied by turbulent flow. It is important to accurately reproduce and analyze the mean flow and turbulence statistics of such flows to design physically stable and performance assurance structure. We carried out 3D RANS computations with widely used, two representative turbulence models, k-ω SST and RNG k-ε, to reproduce BFS flow at the Reynolds number of 23,000 and the Froude number of 0.22. The performance of RANS computations is evaluated by comparing numerical results with an experimental measurement. Both RANS computations with two turbulence models appear to reasonably well reproduce mean flow in the shear layer and recirculation zone, while RNG k-ε computation results in about 5% larger velocity between the outer edge of boundary layer and the free surface above the recirculation zone than k-ω SST computation and experiment. Both turbulence models underestimate the shear stress distribution experimentally observed just downstream of the sharp edge of BFS, while shear stresses computed in the boundary layer downstream of reattachment point are agree reasonably well with experimental measurement. RNG k-ε modeling reproduces better shear stress distribution along the bottom boundary layer, but overestimates shear shear stress in the approaching boundary layer and above the bottom boundary layer downstream of the BFS.

• 대한치주과학회:학술대회논문집
• /
• 2007.11a
• /
• pp.177-177
• /
• 2007

• 대한치주과학회:학술대회논문집
• /
• 2007.11a
• /
• pp.170-170
• /
• 2007

• 대한핵의학회:학술대회논문집
• /
• 1988.05a
• /
• pp.137.2-138
• /
• 1988

• The Journal of the Korean dental association
• /
• v.41 no.8 s.411
• /
• pp.558-565
• /
• 2003