• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.42-48
• /
• 2017

Characteristics of ground-penetrating radar(GPR) signals for detecting buried pipes are investigated numerically. Transmitting and receiving parts of a GPR system, a subsurface soil and a plastic pipe filled with a dielectric material are modeled by using the finite-difference time-domain(FDTD) method. FDTD simulations for observing aspects of GPR signals are performed as a function of the diameter of the pipe and the permittivity of the filling material in the pipe. GPR signals scattered by a dielectric filled pipe appear as a superposition of two waves, such as the specular wave from the front convex surface of the pipe and the axial wave from the rear concave surface of the pipe. We show that the amplitude, the polarity, the delay time of two waves depend on the size of the pipe and the permittivity of the filling material in the pipe.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.1
• /
• pp.26-33
• /
• 2007

The intake swirl motion, as one of dominant effects for an engine combustion. is very effective for turbulence enhancement during the compression process in the cylinder of 2-valve engine. Because the combustion flame speed is determined by the turbulence that is mainly generated from the mean flow of the charge air motion in intake port system. This paper describes the experimental results of swirl flow and combustion characteristics by using the oil spot method and back-scattering Laser Doppler velocimeter (LDV) in 2-valve single cylinder transparent LPG engine using the liquid phase LPG injection. For this. various intake port configurations were developed by using the flow box system and swirl ratios for different intake port configurations were determined by impulse swirl meter in a steady flow rig test. And the effects of intake swirl ratio on combustion characteristics in an LPG engine were analyzed with some analysis parameters that is swirl ratio. mean flow coefficient, swirl mean velocity fuel conversion efficiency. combustion duration and cyclic variations of indicated mean effective pressure(IMEP). As these research results, we found that the intake port configuration with swirl ratio of 2.0 that has a reasonable lean combustion stability is very suitable to an $11{\ell}$ heavy-duty LPG engine with liquid phase fuel injection system. It also has a better mean flow coefficient of 0.34 to develope a stable flame kernel and to produce high performance. This research expects to clarify major factor that effects on the design of intake port efficiently with the optimized swirl ratio for the heavy duty LPG engine.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.720-728
• /
• 2011

In this paper, development of the monopulse secondary surveillance radar antenna which can be used for IFF system is presented. This antenna that is passive linear array is comprised of the row-feeder and several array-elements. The row-feeder provides sum, different and SLS(Sidelobe Supression) channels which are optimized the distribution of the power and phase ratio. The azimuthe sidelobe level of the sum channel beam pattern is -20 dBc or less. The SLS channel covers the sidelobe of the sum-chanel in the whole azimuth angle range. And the difference channel is used to perform the mono-pulse function, improves the detection accuracy in the azimuth direction. Meanwhile, the arrayelement makes shaped beam in the elevation angle, in order to eliminate the clutter and multipath effects from the ground. Performance of the antenna developed is verified by the measurement of S-parameters and far-field beam pattern, and satisfies all of the development specifications well.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.63-69
• /
• 2006

The optical submarine cable has a long distance cable and the repeater for optical amplification compared to territorial optical cable so conventional OTDR utilization for the optical submarine cable is limited. in case the optical core in the optical submarine cable system cut, by using Coherent OTDR that utilize OTDR path in repeater the cable fault point can be detected and in case the faulty of the copper tube in the cable that provide power for the repeater to amplify optical signal, the ways using the current/voltage characteristic, the capacitance per Km and so on is required. this report suggest efficient fault location detecting mechanism by categorized cable fault type.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.147-154
• /
• 2011

Backscattered electrons (BSE) are generated at the impact of the primary electron beam on the specimen. BSE imaging provides the compositional contrast to resolve chemical features of sectioned block-face. A focused ion beam (FIB) column can be combined with a field emission scanning electron microscope (FESEM) to ensure a dual (or cross)-beam system (FIB-FESEM). Due to the milling of the specimen material by 10 to 100 nm with the gallium ion beam, FIB-FESEM allows the serial block-face (SBF) imaging of plastic-embedded specimens with high z-axis resolution. After contrast inversion, BSE images are similar to transmitted electron images by transmission electron microscopy. As another means of SBF imaging, a specialized ultramirotome has been incorporated into the specimen chamber of FESEM ($3View^{(R)}$). Internal structures of plastic-embedded specimens can be serially revealed and analyzed by $3View^{(R)}$ with a large field of view to facilitate three-dimensional reconstruction. These two SBF approaches by FESEM can be employed to unravel spatial association of (sub)cellular entities for a comprehensive understanding of complex biological systems.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.137-140
• /
• 2008

During CHAOS (2003, 2006) and SSGH projects (2007), acoustic investigation including hydroacoustic (HA), side-scan sonar (SSS) and highresolution sparker seismic (HSS) surveys was carried out on the northeastern Sakhalin slope ($53^{\circ}56'\;N$, $143^{\circ}52'\;E$ to $54^{\circ}40'\;N$, $144^{\circ}32'\;E$). More than 130 methane seeps with high backscatter intensity are identified on SSS mosaic, which are well accompanied with gas flares in the water column on HA profiles and subbottom gas chimneys on HSS profiles. It is likely that that some seeps align along a NW strike parallel to the Lavrentiev Fault.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.227-236
• /
• 2005

Hydrothermal tourmaline occurs as aggregates or dissemination in the diaspore nodule from an aluminum-rich clay deposit, Milyang, southeastern Korea. Most crystals of tourmaline show complex textures that are finely zoned. The fine-scale chemical zonation of hydrothermal tourmaline reflects the fluctuation conditions that would be expected from fluid mixing in open systems. Oscillatory chemical zoning in tourmaline formed and showed similar patterns, regardless of its crystallographic directions. Mg was enriched in the early stage of crystal growth while Fe was enriched in the later stage, with fluctuations of the ratio of Fe to Mg. Chemical analysis, BSE images, and X-ray compositional maps confirm that the oscillatory Boning in tourmaline is exclusively controlled by the variations of Fe and Mg contents, but the contribution of boron to the zonation is insignificant. The fact that tourmaline altered to diaspore and dickite indicates that tourmaline was unstable with respect to these aluminous minerals as the B, Fe, and Mg activities decreased. Therefore, the aluminum activity may control the stability of tourmaline in the hydrothermal system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.149-157
• /
• 2008

If we use the microwave of SAR, we can observe ocean in spite of severe weather or night time. The sea surface image of SAR has numerous information about atmospheric phenomena related to surface wind field. The extracted wind information from SAR can be used diversely. In order to extract sea wind speed from SAR image, a generated wind direction from SAR and sigma nought should be input into wind model. Therefore, wind speed can be obtained by input wind direction into CMOD5 Model. Azimuth angle using CMOD5 Model is generated by added $90^{\circ}$ to Look angle which is extracted from SAR data file. A gained wind direction spectrum from SAR image has $180^{\circ}$ ambiguity because of 2D-FFT. This ambiguity should decide to use the location of land, wind direction in field or the result of numerical model. Consequently, wind direction using 2D-FFT is $3^{\circ}{\sim}7^{\circ}$ differences with actual surveying data. Wind speed by CMOD5 model is similar to actual surveying data as below 2m/s.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2010

An optical method was introduced to investigate the dispersion stability of Saengshik beverages (SB) containing 3.7-11.7% Saengshik powder (SP). Time course changes in backscattering light flux (BSLF) from SB were monitored by a Turbiscan. BSLF in the bottom and top layers of SB increased by forming sediment and foam, respectively, while that in the middle layer decreased by clarifying. With SP levels, sedimentation in SB was retarded, but the height of total sedimentation layer was increased. A logarithmic model was developed to fit to the changes in BSLF with time, showing determination coefficients of 0.979-0.988. The levels of SP in SB influenced the migration speed of the clarification front as well as the numbers of separated layers; 2 layers in SB containing 3.7% SP, 3 in 5.7-9.7%, and 4 in 11.7%. Formation of clear layers started after 17-29 min and continued for 22-53 min. The clarification was retarded most in SB containing 7.7% SP, indicating the most stable SP level for the SB preparation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.101-101
• /
• 2017

근래에 대한민국 담수계에 조류 대발생으로 인한 수질악화 문재가 대두되고 있다. 또한 독성물질을 생성하는 남조류종이 우점하는 현상으로인해 수질문제와더불에 생태계와 인간의 건강도 잠재적인 위험을 받고있는 실정이다. 이와같은 조류 대발생으로인한 피해를 최소화하기위해 효과적인 수질관리가 필수적이다. 원격탐사기술은 조류의 공간적인 분포를 해석하고 농도를 정량화하기위해 이용되고 있다. 현재까지 많은 분광알고리즘들이 개발되어 담수유역에 적용이 되고 있다. 수체마다 다른 분광특성 때문에 알고리즘내의 파라미터 및 분광밴드 조정이 필수적이다. 하지만 대부분의 연구에선 파라미터와 밴드의 변경에 따른 결과향상에만 초점이 맞춰지고 있어 분광알고리즘내의 파라미터와 분광밴드사이의 관계 이해 뿐만아니라 알고리즘 최종 산출물에 대한 영향에 관한 설명이 전무한 실정이다. 본 연구에선, 대한민국 백제보를 대상으로 현장모니터링 및 조류추출 실험을 진행하였고, 이를 기반으로 5가지 클로로필a 알고리즘과 2가지 피코시아닌 알고리즘을 구축하였다. 알고리즘내에서 변수들의 관계와 영향을 알아보기위해 민감도 분석을 실시하였다. 민감도 분석 조건을 기반으로 one-objective 최적화 및 multi-objective 최적화를 실시하여 백제보수계를 대표할 수 있는 최적 변수들을 모의하였다. 민감도 분석결과 후방산란계수에 영향을 미치는 파라미터와 조류 생체량에 영향을 미치는 파라미터가 다른 변수들 및 알고리즘 농도산정결과에 가장 민감한 것으로 나타났다. multi-objective 최적화 결과가 one-objective 결과 및 reference 결과보다 대부분 정확도가 향상되었고 흡광도 계수를 함께 고려할 수 있기 때문에 백제보 수계의 분광특성을 함께 고려하여 대표할 수 있는 장점을 가지는 것으로 나타났다. 따라서, 본 연구는 민감도 분석을 활용하여 분광알고리즘 내의 변수들의 이해를 도모하였고, 최적화 기법 중, multi-objective 최적화 기법이 백제보의 분광특성을 대변하는 최적변수를 제시할 수 있음과 동시에 보다 나은 정확성을 제고할 수 있음을 확인하였다.