• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.101-109
• /
• 2021

Wave observations using a marine X-band radar are conducted by analyzing the backscattered radar signal from sea surfaces. Wave parameters are extracted using Modulation Transfer Function obtained from 3D wave number and frequency spectra which are calculated by 3D FFT of time series of sea surface images (42 images per minute). The accuracy of estimation of the significant wave height is, therefore, critically dependent on the quality of radar images. Wave observations during Typhoon Maysak and Haishen in the summer of 2020 show large errors in the estimation of the significant wave heights. It is because of the deteriorated radar images due to raindrops falling on the sea surface. This paper presents the algorithm developed to increase the accuracy of wave heights estimation from radar images by adopting convolution neural network(CNN) which automatically classify radar images into rain and non-rain cases. Then, an algorithm for deriving the Hs is proposed by creating different ANN models and selectively applying them according to the rain or non-rain cases. The developed algorithm applied to heavy rain cases during typhoons and showed critically improved results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.979-986
• /
• 2010

This paper presents an algorithm for retrieving precise radar cross sections(RCS) of various trihedral corner reflectors (TCR) which are external calibrators of synthetic aperture radar(SAR) systems. The theoretical RCSs of the TCRs are computed based on the physical optics(PO), geometrical optics(GO), and physical theory of diffraction(PTD) techniques; that is, the RCS computation includes the single reflections(PO), double reflections(GO-PO), triple reflections(GO-GO-PO), and edge diffractions(PTD) from the TCR. At first, we acquire an SAR image of the area that five TCRs installed in, and then extract the RCS of the TCRs. The RCSs of the TCRs are extracted accurately from the SAR image by adding up the power spill, which is generated due to the radar IRF(Impulse Response Function), using a square window. We compare the extracted RCSs with the theoretical RCSs and analyze the difference between the theoretical and experimental RCSs of the TCR for various window sizes and various backscattering coefficient levels of the adjacent area. Finally, we propose the minimum size of the integration area and the maximum level of the backscattering coefficients for the adjacent area.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.257-272
• /
• 2007

This paper analyzed relationships between various features from SAR data with multiple acquisition dates and mode (frequency, polarization and incidence angles), and land-cover classes. Two typical types of features were extracted by considering acquisition conditions of currently available SAR data. First, coherence, temporal variability and principal component transform-based features were extracted from multi-temporal and single mode SAR data. C-band ERS-1/2, ENVISAT ASAR and Radarsat-1, and L-band JERS-1 SAR data were used for those features and different characteristics of different SAR sensor data were discussed in terms of land-cover discrimination capability. Overall, tandem coherence showed the best discrimination capability among various features. Long-term coherence from C-band SAR data provided a useful information on the discrimination of urban areas from other classes. Paddy fields showed the highest temporal variability values in all SAR sensor data. Features from principal component transform contained particular information relevant to specific land-cover class. As features for multiple mode SAR data acquired at similar dates, polarization ratio and multi-channel variability were also considered. VH/VV polarization ratio was a useful feature for the discrimination of forest and dry fields in which the distributions of coherence and temporal variability were significantly overlapped. It would be expected that the case study results could be useful information on improvement of classification accuracy in land-cover classification with SAR data, provided that the main findings of this paper would be confirmed by extensive case studies based on multi-temporal SAR data with various modes and ground-based SAR experiments.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.1
• /
• pp.22-36
• /
• 2000

중원지역 지열수의 CO2 가스의 용축과 수반된 탄산염 침전물의 광물학적 특성을 밝히기 위하여 탄산염 침전물에 대해 광물학적 및 지구화학적 분석방법을 적용하여 보았다. 이들은 매년 수 mm의 두께로 저수조내에 침전되며 미세한 층상으로 결정화되어 있고, 검은 갈색의 얇은 층들이 반복적으로 존재하고 있다. 침전물은 비교적 순수한 방해석으로 되어 있으며 1M HCl로 처리하여 잔류물을 XRD 분석한 결과는 카올린 광물 및 일라이트질 광물이 확인되었다. 전자현미분석에 의하면 검은 갈색층은 주로 방해석과 Fe나 Mn 산화광물의 집합체이며 소량의 점토광물도 함께 섞여 있는 것으로 추정된다. Fe의 경우에는 주로 방해석내 Ca자리를 치환하여 존재하며 일부 산화광물로 함께 침전된 것으로 보인다. 반면에 Mn의 경우는 일부는 Fe처럼 방해석결정구조 내에서 Ca를 치환하면서 존재하기도 하지만 주로 산화물의 형태로 존재하는 것으로 보인다. 후방산란전자상(BSEI) 관찰에 의하면 Fe와 Mn 모두 매우 미세한 입자의 산화광물들로 밀집해 있는 부분이 관찰되기도 한다. 중원지역 탄산수로부터 방해석이 침전되는 과정은 CO2 가스가 방출되면서 pH가 증가하면서 방해석 및 Fe, Mn 산화물이 과포화상태가 되어 침전되는 것으로서 해석할 수 있다. 또한 지하 심부를 순환하면서 활발한 물-암석반응의 결과로 Si나 Al 및 기타 이온들의 함량이 상대적으로 높았던 탄산수가 pH가 높아지면서 카올린 광물이나 일라이트질 광물, 석영등의 규산염 광물들이 함께 침전하였을 것이다. 그러나 방해석의 침전과정이 이루어지는 과정 동안에, 온천공으로부터 채수되는 탄산수의 양이 수요에 따라 매우 불규칙해서 탄산수의 수요가 많은 경우 탄산수가 지속적으로 과잉 채수되면 주변 천층지하수가 탄산수에 혼합되어 Fe, Mn 등의 농도를 상대적으로 낮추게 되어 산화물형태로 침전되기가 어려워져서 거의 순수한 방해석만이 침전하게 된다. 결과적으로 거의 순수한 방해석 층에 검붉은 층이 불규칙하게 반복되고 있는 중원지역 탄산염침전물은 침전작용이 일어나는 대부분의 기간 동안 지속적으로 주변 전층지하수의 유입이 일어났음을 지시하고 있다. 또한 Fe, Mn 등의 함량이 높은 탄산수로부터의 침전은 매우 짧은 기간동안 단속적으로 일어났음을 지시한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.23-31
• /
• 2016

In this study, we modified the conventional tensile split Hopkinson bar(TSHB) apparatus typically used for the high strength steel to evaluate the tensile deformation behavior of soft metallic sheet materials under high strain rates. Stress-strain curves of high purity single and multi-crystalline materials were obtained using this experimental procedure. Grain morphology and initial crystallographic orientation were characterized by EBSD(Electron Backscattered Diffraction) method measured in a FE-SEM(Field emission-scanning electron microscopy). The fractured surfaces were observed by using optical microscopy. The relationship between plastic deformation of aluminum crystalline materials under high-strain rates and the initial microstructure and the crystallographic orientations has been addressed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.377-383
• /
• 2016

The effect of long-term aging degradation on magnetic properties of ferritic 11Cr low-carbon steel was investigated. Coercivity and hysteresis loss measured from the hysteresis loops decreased with long-term aging time and showed that the relation was well fitted by a second order exponential function. Vickers hardness also decreased with aging time and resulted in mechanical softening. In addition, the microstructural evolution was observed by the scanning electron microscopy, backscattered electron image and X-ray diffraction. The $Cr_{23}C_6$ precipitates along grain boundary grew fast and Laves ($Fe_2W$) phase on martensitic lath boundaries in interior grains was developed. The solid solution atoms depleted in matrix and lath subgrains recovered owing to precipitate coarsening with long-term aging degradation. There was a close relation with softening of magnetic and mechanical properties.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.152-159
• /
• 2017

Rockfish was a commercially important fish specie in marine ranching areas in Korea. To estimate density and biomass of rockfish using acoustic method, target strength (TS) information is required on the species. This study measured TS dependence on tilt angle and size on 14 live rockfish individuals at 38, 70, and, 120 kHz by ex-situ measurement (tethered method) and acoustic scattering model (Krichhoff ray mode, KRM). The swimbladdered angle ranged from 18 to $30^{\circ}$ ($mean{\pm}s.d.=26{\pm}4^{\circ}$). The mean TS for all individuals was highest -35.9 dB of tilt angle $-17^{\circ}$ at 38 kHz, -35.4 dB of tilt angle $-25^{\circ}$ at 70 kHz, and -34.9 dB of tilt angle $-22^{\circ}$ at 120 kHz. The ex-situ TS-total length (TL, cm) relationships were $TS_{38kHz}=20log_{10}(TL)-67.1$, $TS_{70kHz}=20log_{10}(TL)-68.6$, and $TS_{120kHz}=20log_{10}(TL)-69.9$, respectively. The model TS-total length (TL, cm) relationships were $TS_{38kHz}=20log_{10}(TL)-66.4$, $TS_{70kHz}=20log_{10}(TL)-67.0$, $TS_{120kHz}=20log_{10}(TL)-67.0$. The two measurements between the ex-situ TS and KRM model for TS-tilt angle and fish size were found to be significantly correlated.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.183-196
• /
• 2020

This study aimed to recover native gold from the concentrate using microwave-nitric acid leaching and magnetic/hydro separation experiments. The insoluble-residue was filtered from leaching solution through microwave-nitric acid leaching experiment. As a result of the atomic absorption spectrometer(AAS) analysis of the filtered leaching solution, it was discovered that Au content was not eluted at all and it was observed from the back scattered electron(BSE) image that native gold was liberated in the insoluble-residue. When magnetic/hydro separation experiments were applied for the insoluble-residue, magnetic and non magnetic minerals were separtated from insoluble-residue. Magnetite was recovered from the magnetic minerals and as a result of applying the hydro separation experiment again for the non-magnetic mineral, native gold was recovered. The native gold was identified through the X-ray diffraction(XRD) analysis and BSE image.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.139-144
• /
• 2014

A series of the planar cathodoluminescence (CL) and backscattered-electron (BSE) images of magmatic zircon from the Paleozoic Yeongdeok pluton in the southeastern Korean Peninsula were taken using a scanning electron microscope for a 3D reconstruction of internal zonation of zircon. Seven zircon crystals mounted in epoxy were serially polished with average $3{\mu}m$ thickness to their disappearance. Their 3D reconstruction of zonation was performed using the Volume Viewer function in the ImageJ software. The 3D oscillatory zoning pattern of zircon was apparently shown in all the analyzed crystals. This method can further be applied to zircon crystals of multiple growth histories as well as other geological materials.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.27-34
• /
• 2006

This paper has implemented a very small($1.4{\times}2.8[Cm^2]$) 13.56[MHz] RFID reader ensuring machine ID recognition correctly in a noise space of Tag-to-Reader within 3Cm. For operation of the RFID system, at first, this paper has designed the loop antenna of a reader and the fading model of back-scattering on microwave propagation following to 13.56[MHz] RFID Air Interface ISO/IEC specification. Secondly, this paper has proposed the automatically path selected RF switching circuit and the firmware operation relationship by measuring and analyzing the very small RFID RF issues. Finally, as a very small reader main body, this paper has shown the DSP board and software functions made for extraction of $1{\sim}2$ machine ID information and error prevention simultaneously with carrying of 13.56[MHz] RFID signals that the international standard specification ISO/IEC 18000-3 defined.