• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.14-21
• /
• 2006

The unsteady vortex lattice method is used to model twisting and flapping motions of a rectangular flat plate wing. The results for plunging and pitching motions were compared with the limited experimental results available and other numerical methods. They show that the method is capable of simulating many of the features of complex flapping flight. The lift, thrust and propulsive efficiency of a rectangular flat plate wing have been calculated for various twisting angles and reduced frequency with an amplitude of flapping angle($20^{\circ}$). And the effects of the twisting on the aerodynamic characteristics of the flapping wing are discussed by examination of their trends.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.452-455
• /
• 2004

The influence of wake flow on a flat-plate blade having different shapes near the hailing edge has been investigated in this paper. Two different shapes near the trailing edge namely the pressure surface cutting (TP) and the suction surface cutting (TS) have been used. The calculation has been performed for two different angles of attack (a =10 and 15 degree) in both the cases. RANS equations have been solved using SST-model as a turbulence closure. Cp and CL values obtained for TS are higher compared to those obtained for TP. Also, the vorticity distribution obtained in case of TS is stronger as compared to that obtained in the case of TP The Karmann Vortex is observed in both the cases but it is more clear in TS case. It is found that in the case of TS, flow separation does not occur upto the trailing edge on both the suction and the pressure sides of the blade while in the case of TP, the flow separateson the pressure surface near the trailing edge of the flat-plate blade.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.23-30
• /
• 1998

The stabilization characteristics of diffusion flame formed in the wake of a cylindrical flame holder were investigated. Distribution of turbulence intensity, concentration distribution of combustion gas, and ion currents were measured. The turbulence intensity in the wake of cylindrical- game holder is increased with increase of diameter or blockage ratio of grid. If the auxiliary fuel is injected into recirculation zone, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.11
• /
• pp.2981-2994
• /
• 1995

In order to elucidate the effects of positive pressure gradient on flame properties, structure and stabilization, an experimental study is made on turbulent diffusion flame stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. In this paper, stabilization, characteristics and flame structure are examined by varying the divergent angle of duct. Temperature, ion current and Schlieren photographs were measured. It is found that critical divergent angle is expected to be about 8 ~ 12 degree through blow-off velocity pattern to divergent angle and the positive pressure gradient influences the flame temperature, intensity of ion current and eddy structure behind the rod. With the increase of divergent angle, typical temperature of recirculation zone is low but intensity of ion current is high in shear layer behind rod. Energy distributions of fluctuating temperature and ion current signals turn up low frequency corresponding to large scale eddies but high frequency corresponding to small scale eddies as well as low with the increase of divergent angle. Therefore the flame structure becomes a typical distributed-reacting flame.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.3
• /
• pp.177-186
• /
• 2003

In the present study, the flow characteristics of developing turbulent flows are investigated at the exit region of a square cross-sectional 180" curved duct with dimensions of 40mm$\times$40mm$\times$4000mm (height $\times$ width $\times$length). Smoke particles produced from mosquito coils were used as seed particles for the LDV measurement. Experiments were carried out to measure axial velocity profiles, shear stress distributions and entrance lengths by using an LDV system and Rotating Machinery Resolver RMR with PHASE software. Experimental results clearly show that the time-averaged Reynolds number does not affect oscillatory flow characteristics because the turbulent components tend to balance the oscillatory components in the fully developed flow region. Also, the velocity profiles are in good agreement with 1/7power law such as the results of steady turbulent flows. The turbulent intensity linearly increases along the walls and is slightly higher, especially in the period of deceleration. On the other hand, the LDV measurements show that shear stress values in slightly higher in the period of deceleration due to the flow characteristics in the exit region. The entrance length where flows become stable appears at the point that is 40 times the length of hydraulic diameter.eter.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.149.1-149.1
• /
• 2012

고성능 다단연소싸이클 엔진은 산화제과잉 예연소기를 사용한다. 예연소기 후류에 위치한 배관 및 연소기 헤드 등은 고온/고압 산화제 과잉 환경에 놓이게 되며, 운용 조건에서는 국부적으로 온도를 상승시키는 외부 발화제에 의하여 녹는점보다 낮은 온도에서 재질이 발화될 수 있다. 따라서, 이러한 환경에 적합한 재질 및 코팅은 내산화성, 내인화성 및 자발화성도 중요하나, 외부 발화제에 의한 내발화성이 가장 중요한 특성이 된다. 여기서는 이러한 환경에 적합하며 지상 시험용 노즐 및 배관에 적용될 수 있는 재질 및 코팅에 대하여 조사한다. 러시아는 이미 이러한 환경에 적합한 재질 및 코팅들을 개발하여 RD-170, 180에 적용 중이다. 그러나 미국은 최근에 이러한 연구를 시작한 것으로 추정된다. 따라서 자료 접근이 가능한 범위에서 러시아의 재질 및 코팅을 조사하며, 미국 자료에서는 산소 시스템 안전 등과 같이 간접적인 자료들을 통하여 대체가 가능한 후보 재질 및 코팅을 조사한다. 다단연소싸이클 연소시험 배관에 적용할 수 있는 방법은 다음과 같다. 코팅 없이 Monel K500을 사용하거나, OFHC 혹은 Ni 라이너에 고강도 외피를 사용하는 방법이 있으나, 두 방법 모두 재질의 가격 및 수급, 라이너 적용 방법 등이 어려울 수 있다. 국내에서 산화제과잉 가스 환경에서 적용할 수 있는 법랑을 개발하거나 수급이 용이한 법랑을 찾아 오스테나이트 스테인리스강에 적용하는 방법이 있다. 이 방법은 외부 발화제에 대한 내발화성을 증가시키는 경제적이고 용이한 방법으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.388-392
• /
• 2015

본 연구에서는 고정하상 직하류부에서 발생하는 국부세굴현상을 분석하기 위해서 이동상 수리실험을 수행하였다. 순환식 유량공급이 가능한 개수로 실험장치에 아크릴로 제작된 사각형 모형을 설치하고 하류에 균일한 입경의 모래를 설치하여 다양한 수리조건과 시간변화에 따른 하상고의 변화를 측정하였다. 그리고 측정된 하상고 자료로부터 시간별 최대세굴심의 크기를 산정하여 분석하였다. 그 결과 세굴심의 상류부 경사는 일정한 값으로 유지되었고, 최대세굴심과 세굴공 길이, 최대세굴심 발생거리는 시간변화에 따라 증가폭이 점차적으로 감소하였다. 또한 세굴심의 시간변화식의 기울기와 경계지점에서의 수심평균 상대난류강도값과의 관계를 분석하였다. 세굴공 내에서는 하상근처에서 후류가 발생하고, 수심방향으로 유속편차가 극심하게 증가하는 분리전단층이 발생하였다. 본 연구에서 분석된 최대세굴심의 시간적 변화양상과 세굴심 내부에서 발생하는 흐름 및 난류강도 분포특성을 보다 면밀히 분석하여 세굴심의 발달에 영향을 미치는 인자를 이용하여 향후 적절한 세굴심의 예측식을 개발할 수 있고, 최대세굴심을 저감할 수 있는 방안을 제안할 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.378-385
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1161-1168
• /
• 2005

A Multi-Sectional 3D-PTV algorithm was developed to reduce the calculation time of the conventional GA-3D-PTV. The hardware system of the constructed 3D-PTV system consists of two high-speed cameras ($1,024\times1,018$ pixels, 60 fps), a metal halogen lamp (400W) and a host computer. The sphere(D=30mm) is suspended in a circulating water channel $(300mm\times300mm\times1,200m)$ and Reynolds number is 1,130. About 5,000 instantaneous three-dimensional velocity vectors have been obtained by the constructed 3D-PTV system. Turbulent properties such as turbulent intensity, Reynolds stress and turbulent kinetic energy were obtained. An eigenvalue analysis was carried out using the obtained instantaneous 3D velocity vectors to get the topological relations of the asymptotically stable critical point. Two structured shells, inner shell and outer shell, were found in the sphere wake and their motions were clarified by the measured data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.68-74
• /
• 2022

This study analyzed the wake characteristics of the rim-driven propeller (RDP) used in an underwater robot. For underwater robots to perform specific missions, not only propulsion characteristics but also wake characteristics must be considered. In this study, a blade was designed based on NAC 0012 with a symmetrical cross-section. The RDP was hubless with three or four blades. The influence of both the free water surface and the bottom was considered, and the wake was measured using a particle image velocimetry in the advance ratio of 0.2 to 1. Model 1 showed symmetrical wakes in the entire advance ratio section. Model 2 showed asymmetric wakes due to the influence of the free water surface and the bottom at low advance ratio.