• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.19-26
• /
• 2007

Purpose: To compare of the accuracy among various measurement procedures of HDR Brachytherapy, and to evaluate the clinical suitability and usefulness of alternative PMMA (polymethylmethacrylateplastics: $C_5H_8O_2$) plate phantom without any additional cost due to the purchase of measuring apparatus. Materials and Methods: We made a comparative study on three types of measuring systems: well type chamber, source calibration jig, and PMMA plate phantom. Farmer type chamber was used for source calibration jig method and PMMA plate phantom method. Measurement was done 5 times each in comparison with the measurement values from manufacturer. Measurement results from experiment were compared with that from the manufacturer which is offered with the source whenever a source is substituted by a new one and evaluate the accuracy of source activity. Results: As a consequence of Ir-192 source measurement using well type chamber, source calibration jig and PMMA plate phantom, RMS (Root Mean Square) values for the relative error are 0.6%, 1.57%, 2.1%, respectively, compared with the data from manufacturer. And the mean errors with standard deviation are given $-0.2{\pm}0.5%$, $0.97{\pm}1.23%$, $-0.89{\pm}1.87%$ respectively. Conclusion: From the results shown by the three types of measurement system (well type chamber, source calibration jig, and PMMA plate phantom), the measurement with well type chamber produced the best accuracy. It turns out that we can also use the alternative system of PMMA plate phantom clinically without purchasing any additional particular apparatus since the system does not exceed the recommendation of AAPM (American Association of Physicists in Medicine), which requires the error range of within ${\pm}5%$.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3734-3740
• /
• 2014

The aim of this study was provide basic information and establish the criteria in radiation therapy planning by measuring the absorbed neutron dose of normal tissues and lesions according to the number of portals. From September 2013 to January 2014, 20 patients who were diagnosed with prostate cancer and were previously treated with radiation therapy were replanned retrospectively to measure the absorbed neutron dose distribution according to the number of portals. The absorbed neutron dose was measured in each of the 5, 7 and 9 portals using a 15 MV energy, which meant a therapeutic dose of 220 cGy. The optical stimulation luminescence dosimeter was separated by 20cm and 60cm away from the center of the field of view. As a result, the average radiation dose in the abdomen appeared to have a positive relationship with the number of portals, which was statistically significant (p<.05). The average radiation dose was $4.34{\pm}1.08$. The average radiation dose in the thyroid was $2.71{\pm}.37$. Although it showed a positive relationship with the number of portals, it did not have statistical significance. The number of portals and the neutron dose depending on the position showed a significant positive relationship, particularly in the abdomen. As a result of linear regression analysis, as the number of the portal increased in steps, the average volume of the neutrons increased significantly (0.416 times). In conclusion, efficient selection of the number of portals is needed considering the difference in the absorbed neutron dose in the normal tissues depending on the number of the portals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.344-350
• /
• 2003

In this paper, we propose a novel sharing method ordering the events occurring between users collaborated with the common telecomputing environment. We realize the sharing method with multimedia data to improve the coworking effect using teleprocessing network. This sharing method advances the efficiency of communicating projects such as remote education, tele-conference, and co-authoring of multimedia contents by offering conveniences of presentation, group authoring, common management, and transient event productions of the users. As for the conventional sharing white board system, all the multimedia contents segments should be authored by the exclusive program, and we cannot use any existing contents or program. Moreover we suffer from the problem that ordering error occurs in the teleprocessing operation because we do not have any line-up technology for the input ordering of commands. Therefore we develop a method of retrieving input and output events from the windows system and the message hooking technology which transmits between programs in the operating system In addition, we realize the allocation technology of the processing results for all sharing users of the distributed computing environment without any error. Our sharing technology should contribute to improve the face-to-face coworking efficiency for multimedia contents authoring, common blackboard system in the area of remote educations, and presentation display in visual conference.

• Journal of Nutrition and Health
• /
• v.14 no.2
• /
• pp.97-104
• /
• 1981

In order to study the changes of components and enzyme activities during Chungkookjang-Koji preparation, the Kojies were prepared with Bacillus Natto, Bacillus subtilis and traditional method. The temperature of Koji materials during Koji preparation was very different according to the experimental group. The content of ethyl alcohol, reducing sugar, amino nitrogen and water soluble nitrogen were changed by the Koji preparing stage and experimental group. Amylase and protease activities showed on irregular change on standing and their activities were not remarkably different among the groups and appeared weakly.

• Journal of Nutrition and Health
• /
• v.31 no.9
• /
• pp.1377-1384
• /
• 1998

The purpose of this study was to investigate the effect of H$_2$O fraction of Dioscorea japonica Thunb(DJT) with selenium(Se) treatment on blood glucose and lipid metabolism in streptozotocin(STZ)-induced diabetic rats. Male Sprague-Dawley rats(180-220g) weighing were divided into five groups, that is one normal group and four diabetic experimental groups : the STZ-control group, the DJT group, the DJT-Se group and the Se group. Diabetes mellitus was induced in the male rats by injection of STZ into the tail vein at a dose of 45mg/kg B.W. The H,0 fraction of DJT(500mg/kg) given orally were administered for 14 days. The Se treated group were fed a AIN-76 recommendation diet mixed with Na$_2$SeO$_3$(2mg/kg diet), which was prepared fresh daily. The body weight and food intake was monitored daily and plasma levels of glucose, insulin, hematocrit and protein were determined. The plasma concentrations of cholesterol, HDL-cholesterol, triglyceride and fire fatty acid were measured. The activities of aminotrans ferase were analysed. The body weight gain was shown to be significantly higher in the normal group than all diabetic groups. The blood glucose levels of the DIT-Se group was significantly lower compared to those of the experimental groups. The administration of H$_2$O fraction of DJT and selenium showed an increase in plasma protein concentrations. The plasma cholesterol levels of all STZ-groups were not significantly different and HDL-cholesterol levels were increased in the diabetic experimental groups fed on H$_2$O fraction of DJT or Se supplementation. Plasma triglyceride levels were lower in the DJT-Se and Se group than in the STZ-control group. free fatty acid levels were not significantly differ among STZ-control groups. STZ treatment increased aminotransferase activity and that of DJT group was highest. In conclusion, the data from the present experiments indicate that the treatment of the H$_2$O fraction of DJT with selenium showed a synergistic effect and the two can have an influence on hyperg1ycemia and lipid metabolites when administered together. (Korean J Nutrition 31(9) : 1377-1384, 1998)

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.242-255
• /
• 2006

In the recent years, Popularization of mobile devices such as Smart Phones, PDAs and MP3 Players causes rapid increasing necessity of Power management technology because it is most essential factor of mobile devices. On the other hand, despite low price, hard disk has large capacity and high speed. Even it can be made small enough today, too. So it appropriates mobile devices. but it consumes too much power to embed In mobile devices. Due to these motivations, in this paper we had suggested methods of minimizing Power consumption while playing multimedia data in the disk media for real-time and we evaluated what we had suggested. Strict limitation of power consumption of mobile devices has a big impact on designing both hardware and software. One difference between real-time multimedia streaming data and legacy text based data is requirement about continuity of data supply. This fact is why disk drive must persist in active state for the entire playback duration, from power management point of view; it nay be a great burden. A legacy power management function of mobile disk drive affects quality of multimedia playback negatively because of excessive I/O requests when the disk is in standby state. Therefore, in this paper, we analyze power consumption profile of disk drive in detail, and we develop the algorithm which can play multimedia data effectively using less power. This algorithm calculates number of data block to be read and time duration of active/standby state. From this, the algorithm suggested in this paper does optimal scheduling that is ensuring continual playback of data blocks stored in mobile disk drive. And we implement our algorithms in publicly available MPEG player software. This MPEG player software saves up to 60% of power consumption as compared with full-time active stated disk drive, and 38% of power consumption by comparison with disk drive controlled by native power management method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.301-310
• /
• 2016

This is a nonequivalent control group non-synchronized experiment research to verify the effect of moxibustion therapy on efficient management of daily living disabilities and sleep patterns in elderly women with chronic low back pain. Total 12 sessions of moxibustion therapy were applied to elderly women(30 subjects in an experimental group and 30 subjects in a control group) in G City once a week for 12 weeks from March 15th to May $31^{st}$ 2015. Then the follow-up study was conducted 2 weeks after the post survey. For moxibustion, was applied to Shen-shu, Ashi point, Ta chang shu, Yang kuan and Yosu. 5 sheets of moxibustion were applied to 7 acupuncture points of Mugeukboyang moxibustion; Zu san li & Chu chi, Chung wan, Chung chi & Shui tao, Fei shu, Kao hung and Tien shu, Wijung respectively and experimental treatment was conducted. For assessing the degree of back pain, Visual Analog Scale(VAS) developed by Scott & Huskisson(1979) was used and for measuring the degree of daily living disability, Oswestry Disability Index, which was developed by Fairbank et al(1980) and translated and revised by Yim, Hyeon-sul et al.(1998), was used. For measuring sleep patterns, the sleep pattern measurement tool developed by Oh, Jin-su, Song, Mi-soon and Kim, Sin-mi(1998) was used. For data analysis, SPSS/WIN 18.0 was employed and Chi-square test, t-test and repeated measures ANOVA were performed. There were significant differences in pain score(F=2510.32, p<.001), daily living disability score(F=1937.82, p<.001) and sleep pattern score((F=15.54, p<.001) of elderly women that were provided with moxibustion therapy, compared to the control group. Therefore, it was found that moxibustion therapy made a positive contribution to reduction in pain and daily living disabilities and improvement in sleep quality. Based on this study finding, there is a need to apply moxibustion therapy to elderly people with chronic low back pain as a nursing intervention in future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.120-132
• /
• 1993

A continuous hollow fiber membrane reactor(CHFMR) was developed and optimized for the production of yellowfin sole(Limanda aspera) skin gelatin hydrolysates using trypsin. The results were summerized as follows: The $K_m$ value of the CHFMR was 2.4 times higher than that of the batch reactor, indicating reduced enzyme affinity for the substrate. The $K_2$ value of the CHFMR was 8.5 times lower than that of the batch process, showing a significant reduction in trypsin activity in the CHFMR. The optimum operating conditions for the CHFMR process were $55^{\circ}C$, pH 9.0, flux 7.79 ml/min, residence time 77min, and trypsin to substrate ratio, 0.01(w/w) After operating for 60min under the above conditions, $79\%$ of the total amount of initial gelatin was hydrolysed. Enzyme leakage was observed through the 10,000 MWCO membrane after the 20min of reactor operation, while none occurred after 5hr. Total enzyme leakage was about $12.95\%$ at $55^{\circ}C$ for 5hrs. However, there was no apparent correlation between enzyme leakage and substrate hydrolysis. The membrane has a significant effect on trypsin activity loss for 60min of the CHFMR operation. The CHFMR operating with the membrane lost $34\%$ of the initial activity versus a $23\%$ loss of activity after 3hr in the continuous reactor lacking the hollow fiber membrane. The measurement of fouling property showed that relative flux reduction was $91\%$ and flux recover rate was $92\%$ at $10\%$ substrate solution. The productivity(378.85mg product/mg enzyme) of the CHFMR was more than 4 times higher than that of the batch reactor at $55^{\circ}C$.