• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.77-84
• /
• 2022

This study aimed to evaluate the growth, yield, and grain quality characteristics of rice varieties that were subjected to water stress during the tillering stage. We also sought to identify whether water stress could be indicated via the plants' response to chlorophyll fluorescence. In this study, we induced water stress by intentionally cutting off water for 30 days, starting 15 days after transplanting the rice varieties to a greenhouse. We analyzed nine rice varieties, including Ilpum, which is the most frequently cultivated variety in Gyeongsangbuk-do, South Korea. The control group was planted in a paddy field where irrigation was entirely dependent on rainfall. Our results revealed that the heading stage of the nine studied varieties occurred approximately ten days earlier in the rain shelter than in the field. Moreover, the rice yield, head rice rate, and palatability score decreased by 18.6%, 17.1%, and 8.3%, respectively, while protein content increased by 20.2% compared with the control group. The Saenuri and Haimi varieties showed the lowest reduction in yield under the water stress conditions, while the Daebo and Samkwang varieties showed the highest reduction in yield. The chlorophyll fluorescence response after re-irrigation was measured between July 30^th and August 17^th. The ratio of variable fluorescence to maximum chlorophyll fluorescence (F_V/F_M) values failed to recover to their baseline values, resulting in either no change or a reduction in fluorescent response, even after re-irrigation of Daebo and Samkwang varieties. These results can be utilized as empirical data for drought-affected farms to select resistant varieties that can respond to spring drought in the southern plains of Gyeongsangbuk-do.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.227-237
• /
• 2022

The most critical factors for detecting changes in very high-resolution satellite images are building positional inconsistencies and relief displacements caused by satellite side-view. To resolve the above problems, additional processing using a digital elevation model and deep learning approach have been proposed. Unfortunately, these approaches are not sufficiently effective in solving these problems. This study proposed a change detection method that considers both positional and topology information of buildings. Mask R-CNN (Region-based Convolutional Neural Network) was trained on a SpaceNet building detection v2 dataset, and the central points of each building were extracted as building nodes. Then, triangulated irregular network graphs were created on building nodes from temporal images. To extract the area, where there is a structural difference between two graphs, a change index reflecting the similarity of the graphs and differences in the location of building nodes was proposed. Finally, newly changed or deleted buildings were detected by comparing the two graphs. Three pairs of test sites were selected to evaluate the proposed method's effectiveness, and the results showed that changed buildings were detected in the case of side-view satellite images with building positional inconsistencies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.985-994
• /
• 2022

This study diagnoses the maturity level of local government's spatial information policy in the face of the digital transformation period. To this end, by using the stratification (AHP) analysis technique, for the spatial information expert group, the importance evaluation is performed along with the selection of measurement indicators of the level of spatial informatization. First, the current status and indicators in terms of spatial information policies of local governments are studied through theoretical considerations. In addition, by examining previous studies, differentiation from this study is presented. In this study, 3 indicators and 18 detailed items of spatial informatization level evaluation indicators could be selected. As a result of the evaluation, the overall importance ranking for the measurement index was 0.125 (12.5%) for the establishment and utilizations of GIS Systems provided by local governments, 0.109 (10.9%) for the quality management of basic spatial information, 0.107 (10.7%) for the establishment and utilization of its own spatial information. 0.073 (7.3%) for the collaboration and sharing within the institution, 0.071 (7.1%) for the operation of education and support system on spatial information, 0.065 (6.5%) for the securing a dedicated organization and professional human resources, and interest at the institutional level were derived in the order of 0.053 (5.3%). The results of this study are expected to be usefully utilized as basic data to evaluate the level of spatial information policies promoted by local governments. In addition, if the local government's spatial information policy is pursued centering on the major indicators derived from the study, it is expected that efficient policy operation will be possible.

• 한국노년학
• /
• v.40 no.4
• /
• pp.747-760
• /
• 2020

The purpose of this study is to prepare basic data necessary for the development of services or systems that can enhance the accessibility of health and medical services or enhance the efficiency of health and medical use of senior citizens by identifying factors for predicting health and medical use behavior of senior citizens in Incheon Metropolitan City through the Korea health panel data(version 1.5). Through the structural equation model established through the SPSS and AMOS, it was confirmed that the predisposing factors, health behaviors and needs factors had significant direct and indirect effects on the use of health care services. Since the imbalance in demand and supply of health and medical services is more severe than in other regions, the results of this study can be used as basic data when checking whether the current health and medical system in Incheon Metropolitan City can operate effectively in an aged society and discussing how to provide health and medical services to the elderly in Incheon.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.3-11
• /
• 2022

Owing to the increasing demand for electric vehicles (EVs), appropriate management of their waste batteries is required urgently for scrapped vehicles or for addressing battery aging. With respect to technological developments, data-driven diagnosis of waste EV batteries and management technologies have drawn increasing attention. Moreover, robot-based automatic dismantling technologies, which are seemingly interesting, require industrial verifications and linkages with future battery-related database systems. Among these, it is critical to develop and disseminate various advanced battery diagnosis and assessment techniques to improve the efficiency and safety/environment of the recirculation of waste batteries. Incorporation of lithium-related chemical substances in the public pollutant release and transfer register (PRTR) database as well as in-depth risk assessment of gas emissions in waste EV battery combustion and their relevant fire safety are some of the necessary steps. Further research and development thus are needed for optimizing the lifecycle management of waste batteries from various aspects related to data-based diagnosis/classification/disassembly processes as well as reuse/recycling and final disposal. The idea here is that the data should contribute to clean design and manufacturing to reduce the environmental burden and facilitate reuse/recycling in future production of EV batteries. Such optimization should also consider the future technological and market trends.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.12-18
• /
• 2022

Korea depends on the import of raw materials such as iron ore and coal for the steel industry. These raw materials have a major impact on the cost, productivity, and quality competitiveness in the global steel industry. To secure the competitiveness of steel companies, it is necessary to reduce the country's dependence on raw materials. This can be achieved using byproducts with a high Fe content, which are primarily generated by the steel industry. These byproducts are available in the form of a very fine powder, which can disperse as dust when used directly in plant processes. Dust dispersion has a negative impact on the environment and can lead to the loss of raw materials. To enable the use of a wide range of Fe-containing byproducts, it is necessary to pretreat them in the form of larger aggregates such as pellets and briquettes. There are several methods to achieve such aggregates. There are two ways to produce briquettes: using a hot briquette, which supplies additional heat to produce briquettes, or using a cold briquette, which does not use heat. A method for producing cold briquettes using Fe-containing byproducts was investigated in this study. The yield ratio and briquette strength were examined under various manufacturing conditions.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.52-59
• /
• 2022

Pest control treatment was carried out using an unmanned automatic pesticide spraying system that can spray pesticides on crops while moving autonomously to control pests in vegetable greenhouse. As a result of examining the control effect on tomato and strawberry on thrips (Frankliniella occidentalis) and greenhouse whitefly (Trialeurodes vaporariorum) pests, 85.6% of yellow flower thrips were found in tomatoes and 87.5% in strawberries, and 81.7% (tomato) and 80.6% (strawberry) of greenhouse whitefly. In addition, the control effect according to the pesticide treatment method showed a control effect of 81.7% of the chemical spraying treatment by manpower and 83.9% of the automatic moving pesticide spraying treatment (F=22.1, p < 0.001). When comparing the control effect between the two treatment sections, there was no significance, but the automatic transfer spraying treatment showed a 2.2% higher effect. On the other hand, as a result of comparing the spraying time of the drug, the automatic unmanned control sprayer had a spraying time of 5 min/10a, which took about 25 min less than the conventional manpower spraying time of 25-30 min/10a. Based on these results, it was judged that the automatic transfer spraying method could be usefully used for efficient pest control in the facility greenhouse during the peak period of development.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.57-78
• /
• 2022

The disc cutter and cutterbit, which are the most important factors to increase the excavation efficiency of TBM, are key factors in the design and construction of the cutter head. The arrangement, spacing, number, size, and material of disc cutters suitable for the ground conditions determine the success or failure of TBM construction. The disc cutter, which is a representative consumable part in TBM construction, can cause enormous disruption to the construction cost as well as the construction cost unless accurate prediction of wear and replacement cycle is accompanied. Therefore, in this study, the method of calculating the replacement cycle of the disc cutter calculated at the time of design for the slurry shield TBM field, and the depth of wear and replacement location of the disc cutter that occurred during actual construction were compared by analyzing the field data. For a quantitative comparison, weathered soil/weathered rock, soft rock, and hard rock were classified according to the ground in the section showing constant excavation data, and the trajectory of circle was different depending on the location of the disc cutter, so it was compared and analyzed.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.728-737
• /
• 2021

In the meantime, broadcasting CG has gone through the process of dismantling, changing, and distorting, while broadcasting CG in broadcasting programs utilizes the expanded background of 'temporality' and 'formality'. This is to create an audiovisual language that appeals to human synesthesia by expressing the meaning to be conveyed in three dimensions. Broadcast CG goes beyond simple instructional and informational broadcast graphic operation, and increases the pure aesthetic value and sensibility of the video considering readability and formativeness, and through this, the audiovisual information perfection of the broadcast program is derived and acts as a very important factor. Therefore, this paper examines the results of broadcast CG production and utilization methods at existing local broadcasters, and identifies the limitations of local broadcasters' CG production and utilization through case analysis for each broadcast program type. We want to derive a model that is a compromise line. In addition, I would like to suggest a plan that can be applied more actively and practically to local broadcasting programs. In order to solve this problem, this study first examines "Analysis of cases of use of broadcasting CG production in broadcasting programs" and then "more efficient broadcasting CG production techniques by identifying problems in broadcasting CG production methods and utilization of local broadcasters" and how to actively use it". In addition, the results of this study are expected to contribute to the establishment of a new role and practical broadcast CG production model for broadcast graphic designers in charge of broadcast CG production and the technical perspective of broadcast program production by local broadcasters.