• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.59-68
• /
• 2018

The objective of this study is to develop an embedded antenna structure with NFC and WPC composite functions. By selecting stable materials, the optimal component ratio of the polymer sheet was determined. The low cost embedded winding method compared to the existing FPCB was devised. During the winding process, characterization and process technology were developed. We also fabricated a ferrite mold to process the WPC grooves and developed the process technology for optimizing the WPC antenna. The following conclusions were obtained. (1) Optimum composition ratio was derived as Fe 87.5%, Si 7%, Al 5.5% and selected as the final material. (2) Optimal sheet conditions were derived from the experimental evaluation method and the experimental design method through the combination test of the optimized sheet and the conventional mass production FPCB. (3) According to coil diameter and inner diameter, Q value fluctuation, resistance value and efficiency fluctuation are obtained. Therefore, the most suitable coil condition is selected and Rx matching is performed. (4) The EMV load modulation test and the cognitive distance test of the polymer sheet and the ferrite sheet showed that the recognition distance of the polymer sheet at 1k and 4K was 32-33 mm and the recognition distance of the ferrite sheet at the same condition was 30-31 mm.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1049-1060
• /
• 2018

Soil conditioning is one of the key factors for successfull tunnel excavations utilizing the earth pressure-balanced (EPB) shield tunnel boring machine (TBM) by increasing the tunnel face stability and extraction efficiency of excavated soils. In this study, conditioning agents are mixed with the weathered granite soils which are abundant in the Korean peninsula and the workability of the resulting mixture is evaluated through the slump tests to derive and propose the most suitable conditioning agent as well as the most appropriate agent mix ratios. However, since it is cumbersome to perform the slump tests all the time either in the laboratory or in-situ, a simpler test may be needed instead of the slump test; the fall cone test was proposed as a substitute. In this paper, the correlation between the slump value obtained from the slump test and the cone penetration depth obtained from the proposed fall cone test was obtained. Test results showed that a very good correlation between two was observed; it means that the simpler fall cone test can be used to assess the suitability of the conditioned soils instead of the more cumbersome slump test.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.347-352
• /
• 2018

This study proposes seismic response analysis technique of a two-mass rack system which sustains heavy loads with frictional behavioral characteristics. In order to deal with the nonlinear frictional characteristics of the mass on the rack system, the equations of motion of the system has been derived and the appropriate numerical simulation technique has been developed. In order to examine the seismic performance of the proposed system, we consider two parameters that are expected to have great influence on the seismic performance of the system. One is the ratio of the two masses of the load and the rack structure, and the other is the friction coefficient between rack and loaded mass. A number of numerical simulations of the seismic response of structures with various natural frequencies for both parameters have been performed in order to investigate the seismic safety of the rack structures. From the simulated results. it is observed that the maximum displacement of the rack system tends to decrease drastically as the natural frequency of the structure increases regardless of the two parameters of mass ratio and friction coefficient. The proposed study provides important reference data to guarantee the seismic safety of the rack system by considering nonlinear frictional behavior of the loaded mass.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.78-87
• /
• 2018

This study constructed a structural model and examined the fit and significance of the model to identify the influencing factors on the organizational commitment of ROTC cadets. The subjects of this study were 209 male students in grades 3 and 4 ROTC cadets of eight universities located in D, P, and G cities. Data were collected from April 13 to May 29, 2018. The data collected were analyzed by SPSS / WIN 20.0 and AMOS 21.0 programs. A positive correlation was observed between the ROTC instructor's leadership, self-efficacy, job satisfaction, and organizational commitment. Six of the six pathways of the hypothetical structural model were statistically significant. The hypothetical model showed a good fit for the data. The model fit indices were ${\chi}^2/df=1.51$, GFI=.98, AGFI=.90, NFI=0.98, NFI=.97, RMR=.02, RMSEA=.05, and TLI=.98. The ROTC Instructor's leadership and self-efficacy had direct and indirect effects on the organizational commitment. Job satisfaction had the strongest direct influence on organizational commitment. This model explained 73% of the variance in organizational commitment. Therefore, it is necessary to develop an effective education and intervention program that can enhance the ROTC instructor's leadership, self-efficacy, and job satisfaction to increase the organizational commitment of the ROTC cadets.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.112-120
• /
• 2019

This study conducts survey on currently working police officers to examine the actual utilization of HUMINT and suggest measures for strengthening the effective intelligence police activity, Intelligence Led Policing. For the completeness of study, this study presented evidences based on survey data from police officers at sites and this study also suggested improvement measures. in regulating the scope of duty, "Act on the Performance of Duties by Police Officers" regulates that 'Gathering, preparation, and distribution of public safety information' is the duty of police officer and defines the information gathering activity of police as the unique work of police officer. Thus, in accordance with "Act on the Performance of Duties by Police Officers", police officers gather various information to prevent crimes and maintain orders. Among the information gathering methods used by police officer, HUMINT is the oldest measure and it is still utilized. HUMINT has the advantages of low expense, high accuracy, and critical impact on the other. Nevertheless, due to limitations in data objectification, measurement, and responses to double attack, HUMINT is underappreciated. With awareness on such HUMINT issues, this study conducted survey on in-service police officers and examined the actual state of HUMINT. Based on the survey result, this study suggested Intelligence-Led Policing as the effective application method.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.409-423
• /
• 2019

The purposes of this study was to confirm the current issues of workforce policy of dental auxiliary personnel in Korea. The literature review and data collection were conducted in terms of the auxiliary personnel supply, regional distribution, legal works, working environment. Despite the rapid increase in the number of dental hygienists, the number of active dental hygienists is less than half of the total, and the dental clinics still experience the shortage. Considering the dental hygienist's work, the available dental auxiliary personnel for the dental assistance is limited. The proportion of dental hygienists is concentrated in large cities, and the ratio of dental clinics composed of only dental hygienists is high. Thus, it is essential to look for a plan to solve the disparity. The criterion for judging the legality of the works is ambiguous because a large portion of dental hygienist's work is not specified in the Medical Technicians Act. The job life is also shortened, and occupational profession and satisfaction are lowered. Thus, job burnout is accelerating. The difference between the legal works and the practiced works of dental hygienist and the conflict between the personnel might be due to the lack of utilization plans for the dental personnel at the government level. Therefore, the government should establish the roles of dental hygienist in accordance with the demands of the dental health service, institutionalize the necessary policies accordingly, and make efforts to establish plans to improve the relevant laws and utilize the manpower appropriately.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.268-274
• /
• 2018

In this study we suggest a humidity-sensitive color sensor using a one-dimensional photonic crystal and Hong Kong University of Science and Technology-1 (HKUST-1), which is a metal-organic framework (MOF) substance. One-dimensional photonic crystals have a photonic band gap, due to a periodic refractive-index change, and block and reflect light components in a specific wavelength band. The refractive index of HKUST-1 differs in dry and humid environments. Herein we designed a sensor using the presence of the photonic band gap, with FDTD simulation. As a result of optical analysis, the color conversion of the reflected light was superior to the color conversion of the transmitted light. When the center wavelength of the photonic band gap was 550 nm, the maximum peak value of the wet environment increased by a factor of about 9.5 compared to the dry environment, and the color conversion from achromatic to green was excellent as a sensor. The results of this study suggest the application of MOF materials to moisture sensors, and the nanostructure design of MOF materials will expand the applications to industrial devices.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1214-1217
• /
• 2018

In this paper, we propose the development of a Small $360^{\circ}$ Oral Scanner embedded board. The proposed small $360^{\circ}$ oral scanner embedded board consists of image level and transfer method changing part FPGA part, memory part and FIFO to USB transfer part. The image level and transmission mode change unit divides the MIPI format oral image received through the small $360^{\circ}$ oral cavity image sensor and the image sensor into low power signal mode and high speed signal mode and distributes them to the port and transfers the level shift to the FPGA unit. The FPGA unit performs functions such as $360^{\circ}$ image distortion correction, image correction, image processing, and image compression. In the FIFO to USB transfer section, the RAW data transferred through the FIFO in the FPGA is transferred to the PC using USB 3.0, USB 3.1, etc. using the transceiver chip. In order to evaluate the efficiency of the proposed small $360^{\circ}$ oral scanner embedded board, it has been tested by an authorized testing institute. As a result, the frame rate per second is over 60 fps and the data transfer rate is 4.99 Gb/second

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1062-1067
• /
• 2018

In this study, the research processed with a chemical sensor for measuring trace amount of heavy metal ions which is based on the requirements of the efficient sensing technology as recent equipment is applies molecular system in the chemical sensing section that can precisely recognizing selective target substance and transmit its data to physical signal as a result. In this research is concentrated on realize highly precise by utilizing SPR sensor application of recognition functional sensing membrane. Consequently, according to DTSQ-dye sensing membrane, the resonance angle from low-concentration to the highest concentration $10^{-4}M$ of $Ag^+$ ion is $2.17[^{\circ}]$ and this result indicating 4.3 times larger resonance angle changes compare to the other metal substance. Based on SQ-dye sensing membrane, the difference of resonance angle between low concentration and the highest concentration $10^{-4}M$ of $Cu^{2+}$ ion is $2.3[^{\circ}]$ and this outcome is indicating 4.5 times greater resonance angle change to the other metal substance.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.29 no.4
• /
• pp.203-225
• /
• 2018

With the recent increase in private universities being closed due to a decrease in the number of students, the importance of records management at schools is also increasing. However, the guidelines for records management at closed private universities are ambiguous, causing confusion in the transfer of records and management. Therefore, this study conducted a literature survey on university records and institutions, and examined the current status of private universities in schools through education statistics services. Among the surveyed private universities, the latest to be closed, and the largest of them was Suh Nam University, which looked at the detailed records management status of private schools. The purpose of the interview was to analyze the results of the interview and draw up implications and propose improvement measures. First, the proposed improvement plan in this study is to make it mandatory to deploy records management specialists at private universities for specialized records management. Second, the law should be revised to improve the ambiguity of private universities' guidelines. Third, continuous support from higher institutions should be ensured so that records management at closed private universities is not passive. This improvement will enable records management at closed private universities to be carried out efficiently when the future closure of private universities is carried out.