• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.272-273
• /
• 2011

유기발광소자는 차세대 디스플레이 소자로서 빠른 응답 속도, 높은 색 재현성 및 매우 얇은 두께로 제작이 가능한 장점을 가지고 있어서 차세대 디스플레이 소자로서 많은 응용 가능성을 가지고 있다. 청색 유기발광소자는 적색 및 녹색의 유기발광소자의 발광 효율 특성보다 상대적으로 효율이 떨어지고, 색 순도가 낮으며 수명이 짧은 단점을 가지고 있어 소자 특성을 개선해야 한다. 본 논문에서는 청색 유기발광소자의 색 순도와 색 안정성 증진을 위하여 발광층을 2개의 층으로 나누어 15 nm 두께의 4,4'-Bis(2,2-diphenyl-ethen-1-yl)diphenyl (DPVBi) 형광 청색 호스트 물질에 4,4 '-Bis[4-(diphenylamino)stylyl]biphenyl (BDAVBi) 형광 청색 게스트 물질을 첨가하여 제 1 형광 발광층을 형성하고 15 nm 두께의 4,4'-Bis(carbazol-9-yl)biphenyl (CBP) 인광 호스트 물질에 bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium III (FIrpic) 인광 게스트 물질을 첨가한 제 2 인광 발광층으로 구성된 30 nm 두께의 하이브리드 발광층을 사용하여 청색 유기 발광소자를 제작하고 전기적 특성과 광학적 성질을 조사하였다. 하이브리드 발광층을 사용하여 제작된 유기발광소자는 20 mA/cm2의 전류 밀도에서 6.2 cd/A의 발광 효율을 나타내었고, 최대 밝기는 약 16,200 cd/m2로 측정 되었다. 하이브리드 발광층을 사용한 청색 유기발광소자는 전류의 흐름이 단일 발광층 유기발광소자에 비교하여 상대적으로 안정적인 전류 흐름을 가지며 발광층 내부에 더 많은 정공과 전자를 포획하여 엑시톤 형성 확률이 증가하여 발광효율과 밝기가 향상되었다. 하이브리드 발광층을 적용한 유기발광소자는 469 nm파장에서 형광 발광층의 주 전계발광 피크가 나타났고 그와 함께 인광 발광층의 부 전계발광 피크가 491 nm의 파장에서 관측되었다. 또한 전계발광 스펙트럼의 반치폭이 10 nm 감소하여 청색의 색 순도 증가에도 기여하였다. 하이브리드 발광층을 가진 청색 유기발광소자의 색 좌표는 전압 변화에 관계없이 일정한 값을 나타내었다. 이러한 결과는 형광과 인광 발광층으로 구성된 하이브리드 발광층 유기발광소자가 전기적으로 안정성을 가지며 발광 특성을 개선하고 안정적인 청색 유기 발광 디스플레이 소자로 사용 가능함을 나타내고 있다.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2002

After porous filters were manufactured using cordierite powder whose mean paricle size was 200${\mu}m$, they were loaded with catalysts such as $V_2O_5$, CuO and $LaCoO_3$ by vacuum impregnation method. And the NOx/SOx simultaneous removal efficiency was measured by passing NO and $SO_2$ through catalyst-loaded ceramic filters. The cordierite porous filters had the apparent porosity of 61.6%, the compressive strength of 12.3 MPa and the pressure drop of 147 pa at the face velocity of 5 cm/sec. According to the analysis of NO/$SO_2$ simultaneous removal efficiency, perovskite $LaCoO_3$ catalyst was the most efficient for the simultaneous NO and $SO_2$ removal. The $LaCoO_3$ catalyst-loaded filter could remove more than 90% for NO and more than 80% for $SO_2$.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.712-718
• /
• 2009

This paper proposes the optimal transmission parameter selection method for an energy efficient Wireless Personal Area Network (WPAN) system which is applicable to the Maritime Telematics targeting for various ship models. Since the transmission parameter selection is an important factor for WPAN system to decide its energy efficiency, we propose an energy consumption model for ship area network (SAN) employing IEEE 802.15.3 based TDMA HR-WPAN model and analyzes the effect of transmission parameter selection on the performance of energy consumption. In particular, the main performance decision parameter of the SAN applying HR-WPAN is path loss, since it is very varied according to the material of shipbuilding such as steel (large ship), FRP (medium size ship) and compound wood (small ship). Thus, we analyzed and demonstrated that the proper transmission parameter selection among transmit power, PHY data rate and fragment size for each ship model guarantee the energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.153-164
• /
• 2010

In this paper, we propose a multi-channel MAC protocol to improve the channel efficiency and network performance in wireless ad hoc networks. There are two main problems encountered in designing multi-channel MAC protocols. The first problem is the rendezvous problem and the second is multi-channel hidden node problem. In order to solve these problems, most of previous researches that have considered multi-channel MAC protocols use a common control channel to exchange control packets. However, they have a bottleneck problem at common control channel as increasing the number of data channels. The proposed MAC protocol solves the multi-channel hidden node problem using a TDMA scheme and increases the network throughput because transmitting and receiving data at the same time is possible. Also, since there is no common control channel, the network does not suffer from the common control channel saturation problem. Moreover, it achieves energy savings by allowing nodes that are not involved in communication to go into sleep mode. Simulation results show that the proposed MAC protocol improves the network throughput and channel efficiency and provides energy savings.

• Journal of Digital Contents Society
• /
• v.11 no.1
• /
• pp.91-97
• /
• 2010

Flash memory has been used by many digital devices for data storage, exploiting the advantages of non-volatility, low power, stability, and so on, with the help of high integrity, large capacity, and low price. As the fast growing popularity of flash memory, the density of it increases so significantly that its entire address mapping table becomes too big to be stored in SRAM. This paper proposes the associated page address cache with an efficient table management scheme for hybrid flash translation layer mapping. For this purpose, all tables are integrated into a map block containing entire physical page tables. Simulation results show that the proposed scheme can save the extra memory areas and decrease the searching time with less 2.5% of miss ratio on PC workload and can decrease the write overhead by performing write operation 33% out of total writes requested.

• Journal of Korea Water Resources Association
• /
• v.47 no.6
• /
• pp.513-522
• /
• 2014

Climate change and urbanization have affected a increase of peak discharge and water pollution etc. In a view of these aspects, the LID(Low Impact Development) technology has been highlighted as one of adjustable control measures to mimic predevelopment hydrologic condition. Many LID technologies have developed, but there is a lack of studies with verification of LID technology efficiency. Therefore this study developed a rainfall-runoff simulator could be possible to verify LID technology efficiency. Using this simulator, this study has experimented the rainfall verification through the rainfall distribution experiment and the experiment to show the relation between inflow and effective rainfall in order to sprinkle the equal rainfall in each unit bed. As a result, the study defined the relation between allowable discharge range and RPM by nozzle types and verified the hydrologic cycle such as the relation between infiltration rate, surface runoff and subsurface runoff at pervious area and impervious area through the rainfall-runoff experiment.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.167-185
• /
• 2016

$CO_2$ 지중저장 기술은 가장 유력한 대용량 온실가스 감축기술의 하나이다. 이 기술을 적용하여 국제적으로 노르웨이, 알제리, 캐나다, 미국 등에서 이미 대규모 실증 및 상용화 사업이 수행되고 있으며, 호주, 일본, 네덜란드, 독일 등 그 밖의 여러 나라에서 다양한 내용과 규모를 갖는 중소규모 실증사업이 진행되고 있다. 한국도 소규모 육상 파일럿 저장 프로젝트와 중규모 해상 저장실증 프로젝트가 추진되어 착실하게 기술개발과 경험확보를 위해 노력하고 있다. $CO_2$ 지중저장 사업은 화석연료의 사용이 다른 에너지원으로 대체되기 전까지 지속적으로 확장될 것으로 예측되고 있으나, 온실가스 감축시장의 불안전성, 사업의 수익구조와 관련된 경제성, 누출에 대한 안전성 등의 위협요소를 갖고 있다. 따라서 이러한 위협을 극복하기 위해 많은 국가와 기업들이 저비용-고효율 지중저장 기술과 안전한 지중저장 기술의 확보를 목표로 연구개발 및 실증사업을 추진하고 있다. 한국의 경우에 저장소가 주요 포집원으로부터 상당한 거리를 갖고 있는 해저에 발달하고 있기 때문에 지중저장 사업의 경제성 확보가 매우 불리한 조건이다. 따라서 정부나 기업이 CCS 기술을 주요 온실가스 감축수단으로 채택하여 대규모 지중저장 사업을 본격적으로 착수하는 것을 주저하고 있다. 한국과 같은 불리한 조건을 갖는 국가의 경우에 특히 대규모 저장소의 확보를 포함한 저비용-고효율 지중저장 기술의 실용화가 절실하게 필요하다. 결론적으로 한국의 $CO_2$ 지중저장 사업의 성공적인 추진을 위해서는 대규모 저장소의 확보, 저비용-고효율 지중저장 기술의 개발과 실증을 통한 실용화, 중소규모 지중저장 실증사업으로 축적한 기술과 경험으로 대규모 지중저장 사업의 효율화 달성이 요구된다. 이를 위한 실천적인 로드맵과 프로그램의 작성과 착실한 이행 역시 중요하다. 이러한 기반이 착실하게 다져질 경우에 한국에서 대규모 CCS 통합실증과 $CO_2$ 지중저장 사업이 본격적으로 개시될 수 있을 것이다.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.63-68
• /
• 2003

This paper is to measure the sensitivity of relations in communication network operation. In order to procure an important adequacy in the network operation and quality improvement, it is necessary to increase network operation efficiency and analyze the characteristic of network operation. Finally, we analyze costing appropriate operation, propose profit increase scheme and apply realistic business. First of all it's important to improve and estimate a proper operating cost thoroughly and comprehensively. Because the important issue of this process is quality process and this quality process occurs customers' satisfaction, therefore, to make a mutual relation in-between individual change of each element is to analyze a reasonable standard. So, for this reason we study on structuring nice moods for network operation and estimating many scenarios for measuring efficiency. Especially those in economic and sensitivity based. It will be the development of analyzing methods which suites the service and communication system. The result of this study gives a basis for making a flexible and highly predictable system by pre configured sensitivity analysis of each scenarios.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.32-37
• /
• 2007

A DMB CMOS power amplifier (PA) with high efficiency and linearity is present. For this work, a 0.13-um standard CMOS process is employed and all components of the proposed PA are fully integrated into one chop including output matching network and adaptive bias control circuit. To improve the efficiency and linearity simultaneously, an adaptive bias control circuit is adopted along with second harmonic termination circuit at the drain node. The PA is shown a $P_{1dB}$ of 16.64 dBm, power added efficiency (PAE) of 38.31 %, and power gain of 24.64 dB, respectively. The third-order intermodulation (IMD3) and the fifth-order intermodulation (IMD5) have been -24.122 dBc and -37.156 dBc, respectively.