• The Journal of Society for e-Business Studies
• /
• v.25 no.1
• /
• pp.83-107
• /
• 2020

Selecting business charts based on the nature of the data and the purpose of the visualization is useful in business analysis. However, current visualization tools lack the ability to help choose the right business chart for the context. Also, soliciting expert help about visualization methods for every analysis is inefficient. Therefore, the purpose of this study is to propose an accessible method to improve business chart productivity by creating rules for selecting business charts from online published documents. To this end, Korean, English, and Chinese unstructured data describing business charts were collected from the Internet, and the relationships between the contexts and the business charts were calculated using TF-IDF. We also used a Galois lattice to create rules for business chart selection. In order to evaluate the adequacy of the rules generated by the proposed method, experiments were conducted on experimental and control groups. The results confirmed that meaningful rules were extracted by the proposed method. To the best of our knowledge, this is the first study to recommend customizing business charts through open unstructured data analysis and to propose a method that enables efficient selection of business charts for office workers without expert assistance. This method should be useful for staff training by recommending business charts based on the document that he/she is working on.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2009

White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.50-57
• /
• 2009

This paper proposes a VLSI architecture of CAVLC hardware decoder which is a tool eliminating statistical redundancy in H.264/AVC video compression. The previous CAVLC hardware decoder used four stages to decode five code symbols. The previous CAVLC hardware architectures decreased decoding performance because there was an unnecessary idle cycle in between state transitions. Likewise, the computation of valid bit length includes an unnecessary idle cycle. This paper proposes hardware architecture to eliminate the idle cycle efficiently. Two methods are applied to the architecture. One is a method which eliminates an unnecessary things of buffers storing decoded codes and then makes efficient pipeline architecture. The other one is a shifter control to simplify operations and controls in the process of calculating valid bit length. The experimental result shows that the proposed architecture needs only 89 cycle in average for one macroblock decoding. This architecture improves the performance by about 29% than previous designs. The synthesis result shows that the design achieves the maximum operating frequency at 140Mhz and the hardware cost is about 11.5K under a 0.18um CMOS process. Comparing with the previous design, it can achieve low-power operation because this design is implemented with high throughputs and low gate count.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.321-331
• /
• 2006

Recently, runoff characteristics of urban area are changing because of the increase of impervious area by rapidly increasing of population and industrialization, urbanization. It needs to extract the accurate topologic and hydrologic parameters of watershed in order to manage water resource efficiently. Thus, this study developed more precise input data and more improved parameter estimating procedures using GIS(Geographic Information System) and GA(Genetic Algorithm). For these purposes, XP-SWMM (EXPert-Storm Water Management Model) was used to simulate the urban runoff. The model was applied to An-Yang stream basin that is a typical Korean urban stream basin with several tributaries. The rules for parameter estimation were composed and applied based on quantity parameters that are investigated through the sensitivity analysis. GA algorithm is composed of these rules and facts. The conditions of urban flows are simulated using the rainfall-runoff data of the study area. The data of area, slope, width of each subcatchment and length, slope of each stream reach were acquired from topographic maps, and imperviousness rate, land use types, infiltration capacities of each subcatchment from land use maps, soil maps using GIS. Also we gave the management scheme of urbanization runoff using XP-SWMM. The parameters are estimated by GA from sensitivity analysis which is performed to analyze the runoff parameters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.110-116
• /
• 2005

It is very important to reduce the computational processing time for the application of the vision system in real time such as inspection, the determination of object's dimension and welding etc, because the vision system model involves a lot of measurement data acquired by CCD camera. Also, a lot of computation time is required in estimating the parameters in the vision system model if the iterative batch estimation method such as Newton Raphson is used. Thus, the effective computation method such as the Extended Kalman Filtering(EKF) is required to solve the above problems. The EKF has much advantages in that it takes explicitly into account the measurement uncertainties, and is a simple and efficient recursive procedures. Thus, this study is to develop the EKF algorithm to compute the parameters in the vision system model in real time. This vision system model involves the six parameters to account for the cameras inner and outer parameters. Also the EKF is applied to estimate the object's dimension. Finally, practicality of the estimation scheme of the vision system based on the EKF is verified experimently by performing the estimation of object's dimension.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.40-40
• /
• 2000

우리나라의 제지산업은 천연펄프 자급능력이 20% 내외로서 낮은 실정이며 주원료의 7 70% 이상을 수입펄프와 고지에 의존하는 원료수급의 불균형이 심화된 상태이다 .. 1999년도 제지통계에 의하면 골판지 원지로 사용되는 라이너지와 골심지의 연간 생산량이 각각 169만 톤과 88만톤을 점유하여 국내 전체 지류생산량 887만톤의 약 29%를 점하고 있다. 이처럼 국내 제지산업에서 큰 비중을 차지하는 골판지 원지는 주로 국내에서 발생되는 고지를 원료 로 하여 생산되고 있어 환경친화적인 지류라 할 수 있다. 그러나, 국산 골판지 고지( Korean O Old Corrugated Container)의 경우 골판지 고지 이외에 각종 인쇄고지와 기타 산업용지가 혼합된 최하급지로서, 고지 재생 시 여러 가지 많은 제한요소를 지니고 있다. 국산 골판지 고지는 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반에 달할 만큼 많으며, 아울러 섬유가 각질화됨에 따라 재생처리가 거듭될수록 그러한 미세분의 형성이 더욱 조장 되고 있다. 일반적으로 크기 75µm 이하의 무기질 및 단섬유를 일걷는 미세분은 골판지 원지 의 초지시 습지필의 탈수를 저해하여 생산성을 저하시키는 요인이 되어 왔다. 이러한 문제 를 해결하기 위해 선진국에서는 골판지 고지를 스크린 또는 클리너 둥으로 정선 처리하여 장단섬유를 분급한 다음, 장섬유분을 선택적으로 고해하여 종이의 강도를 향상시키는 기술 이 개발되어 적용돼 왔으나, 이러한 기술은 우리 나라와 같이 장섬유 보다 미세분 함량이 많은 저급의 골판지 고지를 주원료로 삼는 골판지 원지의 강도 개선에 큰 효과를 거둘 수 없는 기술이라고 판단된다. 이는 기존의 섬유 분급 처리는 고급 고지의 경우에는 효과적이 나 저급의 혼합고지를 100% 재활용하여 구성되는 국산 골판지의 생산 시에 적용하기에는 5 50-60%에 이르는 미세분이 포함되어 분리의 대상이 섬유장이 다른 펼프 섬유라기 보다는 미세섬유를 펄프섬유로부터 분리하는 것이 필요하기 때문이다. 이러한 문제점을 극복하기 위해서는 기포의 수력학적 포집작용을 이용하여 고농도의 미세분을 선택적으로 분급시키는 부상부 유 분급처리방법을 적용하였다. 이 방법은 미세분의 농축을 위한 부가적인 처리가 필요치 않으며, 분급에 천공을 이용하지 않기 때문에 분급처리 시 천공의 plugging 문제가 발생되 지 않는다는 장점도 가지고 있다. 미세분 분급을 위한 최적의 부상부유 조건은 장섬유의 응 집을 촉진하면서 미세분은 그러한 응집체에 포함되지 않은 상태로 자유로이 부상하여 걷혀 지는 경우이다. 응집거동을 조절하기 위한 시도로서 부상부유 처리시 유량을 달리한 실험결 과에 의하면 유량이 낮을수록 장섬유 손실이 줄고 미세분이 선택적으로 포집되나 전체 부상 부유 리젝트의 양이 줄어드는 문제점이 있었다. 이에 본 실험에서는 장섬유의 응집에 영향 하는 또 다른 인자로서 지료의 농도를 증가시키면서, 미세분의 부상부유를 촉진시키도록 유 량을 증가시키는 조건으로 부상부유 처리에 의한 미세분 분급효율을 증가시키고자 하였다.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.195-202
• /
• 2002

The production conditions of cellulolytic enzymes by a fungus, strain FJ1, were optimized using response surface analysis. The culture factors which largely affected the production of enzymes such as cultivation time, carbon source concentration, nitrogen source concentration, and composition ratio of carbon sources were employed. Optimizedconditions of the factors above corresponding to each cellulolytic enzyme production were as fellowing: CMCase production was obtained in the conditions of cultivation time of 5.4 days, carbon source concentration of 3.5%, nitrogen source concentration of 0.6%, and composition ratio of carbon sources of 52:48 (avicel:CMC), xylanase appeared in the conditions of 5.3 days, 3.5%, 0.8%, and 54:46, respectively, and $\beta$-glucosidase were 7.0 days, 5.0%, 1.0%, and 83:17, respectively, and avicelase were 6.5 days, 4.0%, 0.9%, and 64:36, respectively. The activities of CMCase, xylanase, p-glucosidase, and avicelase predicted by the response surface methodology were 33.5, 52.6, 2.88, and 1.84 U/mL, respectively, and $\beta$-glucosidase activity was enhanced up to 74% when compared to that obtained in the experimental conditions.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.443-453
• /
• 2015

In 1922, Hongneung forest was established to support the study of Korean forestry. Nowadays the forest also plays a role as urban forest which provides a green space for local people. This paper proposes the better management plan of Hongneung forest based on visitor monitoring. On-site surveys with a structured questionnaire were carried out from August to November in 2014 and total 750 data were analyzed. The survey results are as follows: 1) Visitors were inclusive of all age groups and most of them lived nearby Hongneung forest, 2) Visitors used the forest mainly for recreational purposes and recognized the forest as 'Green space' rather than 'experimental forest', 3) Visitors had great satisfaction from the forest visit and raised the necessity of more environment education and promotion of the program. Based on the results, the following solutions have been suggested: 1) Environment education will help visitors to raise awareness on the importance of Hongneung forest which plays a role as both experimental and urban forest, 2) Systematic visitor monitoring can contribute to efficient visitor management and administration of the areas. In conclusion, it is necessary to establish a visitor management system that enable to achieve a harmonization between nature conservation and recreational demands as well as to improve management of natural resource and service.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.178-185
• /
• 2011

The recent development of 3D and its application contents have made it possible for people to experience more various 3D contents such as 3D/4D, VR, 3D ride film, I-max, sensory 3D games at theme parks, large-scale exhibitions, 4D cinemas and Video ride. Among them, Video ride, a motion-based genre, especially is getting more popularity, where viewers are immersed in and get indirect experiences in virtual reality. In this study, the production process of the genre of sensory 3D image getting attention recently and ride film are introduced. In the material selection of 3D images, the space and the setting up which is suitable to the fierce movement of rides are studied and some examples of the realization of creative direction ideas and effective technologies using the functions of Stereo Camera which has been first applied to MAYA 2009 are also illustrated. When experts in this 3D image production create more interesting stories with the cultural diversity and introduce enhanced 3D production techniques for excellent contents, domestic relevant companies will be sufficiently able to compete with their foreign counterparts and further establish their successfully unique and strong domains in the image contents sector.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.36-50
• /
• 2005

e-Learning has been mushrooming with wide range of learning groups from pedagogy to andragogy. Despite of increasing e-learning opportunities, many people doubt whether e-learning learners really learn something. The related research papers emphasized that e-Learning would be a failure in terms of understanding of e-learners and intuitive learning activities for activating learner's long-term memory span. The current learning strategies in e-Learning may be based on the traditional classroom, and this results in boring and ineffective learning outcomes. This paper analyzed that how learners have received e-Learning for the last few years from the research and explained what could be the failing aspects of e-Learning. To be successful, e-Learning should consider the e-Learner's individualized teaming style and thinking patterns. When considering of various e-Learning components, the quality of e-learning should not be focused on any specific single factor, but develop every individual factor to the high level of quality. In conclusion, this paper suggest that we need new understand of e-Learning and e-Learner. Also the e-Learning strategies should be examined throughly whether they are on the side of learners and realized how they learn from e-Learning. Finally, we should add enormous imagination into e-Learning for next generation because their teaming patterns significantly differ from their parent's generation.